SmartLine SmartPoint T Manuale utente

User Manual

CHECKTRACECONTROL

SmartPoint/SmartPoint One

Wireless temperature data logger with

• humidity sensor

• external temperature sensor

• external reed sensor.

Info: The user manual is valid for all SmartPoint and SmartPoint One models. For examples in the manual we only use the Smart-

Point model.

PRODUCT

RANGE

• SmartPoint T

Wireless temperature datalogger

• SmartPoint T/H

Wireless temperature and humidity datalogger

• SmartPoint T/W

Wireless temperature datalogger with external sensor

• SmartPoint T/ERS

Wireless temperature datalogger with external reed

sensor

• SmartPoint One T

Wireless temperature datalogger

• SmartPoint One T/H

Wireless temperature and humidity datalogger

• SmartPoint One T/W

Wireless temperature datalogger with external

sensor

User Manual

CHECKTRACECONTROL

SmartPoint/SmartPoint One

Table of Contents

1. SmartPoint models / SmartPoint One models 3

2. SmartPoint descripon 5

3. SmartPoint acvaon 5

3.1 Stock keeping 5

 3.2Operaonalcheckinhibernaonmode 5

 3.3Acvaon 6

4. SmartPoint operaon 6

4.1Mounng 7

4.2 Extended sleep 8

4.3 Logging 9

 4.4Operaonalcheckinacvemode 9

 4.5Operaonalcheckbeforeuseasmonitoringdeviceinashipment 9

5. Calibraon 9

6. Important Informaon 10

6.1Storageandacvemodecondions 10

 6.2Liability 10

 6.3Baery 10

7. Regulatory informaon 10

8. Support/Contact 11

User Manual

CHECKTRACECONTROL

SmartPoint/SmartPoint One

1. SmartPoint models

Model Use case Temperature sensor accuracy

(withoutcalibration,typical)

Additional sensor and its accuracy

(withoutcalibration,typical)

Indicative useful lifetime

SL-SP-T Facility monitoring /

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

up to 3 years

SL-SP-T/H Facility monitoring /

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

Relativeairhumidityin%,typical

accuracy±2.0%RH

up to 3 years

SL-SP-T/1W Facility monitoring

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

External temperature sensor

±1.0°Cfrom–40°Cto–10°C

±0.5°Cfrom–10°Cto+85°C

up to 3 years

SL-SP-T/ERS Facility monitoring ±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

External reed sensor to detect open/

closestateofdoors,hatchesetc

up to 3 years

Info:TheSmartPointmeasurestheambienttemperatureandnotthequalityofthemonitoredgoods.Itspurposeistosignalifproductqualityevaluaonisrequired.

User Manual

CHECKTRACECONTROL

SmartPoint/SmartPoint One

SmartPoint One models

Model Use case Temperature sensor accuracy

(withoutcalibration,typical)

Additional sensor and its accuracy

(withoutcalibration,typical)

Indicative useful lifetime

SL-SP-TO Facility monitoring

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

up to 1 year

SL-SP-T/HO Facility monitoring

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

Relativeairhumidityin%,typical

accuracy±2.0%RH

up to 1 year

SL-SP-T/1WO Facility monitoring

Shipment monitoring

±1.0°C(max)from –40°C to 0°C

±0.5°C(max)from 0°C to +65°C

±1.0°C(max)from +65°C to +85°C

External temperature sensor

±1.0°Cfrom–40°Cto–10°C

±0.5°Cfrom–10°Cto+85°C

up to 1 year

User Manual

CHECKTRACECONTROL

SmartPoint/SmartPoint One

2. SmartPoint description

Model

LED

Flashlight

Product

Type

Arcle

No.

SmartPoint front view

Company

Informaon

IPClass

FCCandIC

Informaon

oponal

Humidity

Sensor

SmartPointbackview

3. SmartPoint activation

SmartPointsaredeliveredin“hibernaon”modeandtheyneedtobeacvatedbeforetheycanbeused.See3.3howtoacvate

the SmartPoint.

3.1 Stock keeping

Inhibernaonmode,SmartPointsarenotacvelymeasuringandreporngsensorreadings.Thismodeensuresthattheenergy

storedinthedevicebaeryisonlylileusedduringstockkeepingofthedevice.Upondelivery,thedevicesareinhibernaon

modeanddonotshowanyacvityonthedeviceitselfnorinSmartView.

IfyouplantonotacvelyusetheSmartPointinthenextmonthofdelivery,itisadvisedtokeepthedeviceinhibernaonmode.

OncetheSmartPointisacvated,itcannotbeputbacktohibernaonmodeagain.

3.2 Operational check in hibernation mode

TheoperaonalfunconingoftheSmartPointcanbecheckedinhibernaonmode.

Duringthecheck,theLEDofthedevicewillblinkandtheSmartPointtransmitsafewmessagestoSmartView,ifanacve

SmartLine network is detected.

•PlacetheSmartPointontheindicatedposionontheSmartMat.

• Hold it steady in place.

•Aer 5 seconds,theLEDshowsacvityandtheSmartPointcontactstheSmartLine

network.

•KeeptheSmartPointsteadyinplaceforanaddional15 – 25 seconds.

TheLEDasheslongfor5 mes,removetheSmartPointimmediately from the Smart-

Mat.

CHECKTRACECONTROL

3.3 Activation

TheSmartPointcanbewokenfromhibernaonmodebyusingaSmartMat.

OnlyacvateSmartPointswhenaSmartLinenetworkisacveandtheSmartPointsarewithin5meterrangeofaSmartGateor

SmartRouter.Beforeacvaon,checkiftheSmartGateorSmartRouterindicateacvenetwork(seeSmartGateorSmartRouter

manual).

Informaon:TheSmartPointhasaninternalclockwhichisusedtomestampsensorreadings.Uponacvaon,theinternalclock

ofthedevicemustbesetbyaSmartLinenetwork.

•PlacetheSmartPointontheindicatedposionontheSmartMat.

•Holditsteadyforabout5 secondsunltheLEDblinks.

• Remove it immediately from the mat.

• If it is placed on the SmartMat for longer than 15 – 25 seconds,theSmartPointgoes

tothehibernaonagain.(Onlyvalidduringtheacvaonprocess.)

•Iftheprocedurehasbeencarriedoutcorrectly,theLEDblinksshortlyevery

45 seconds.

Informaon:SomemestheacvaonoftheSmartPointisnotsuccessfule.g.duetomovementoftheSmartPoint.Retrythe

acvaonprocedureaer15minutes.

KeeptheSmartPointclosetotheSmartGateorSmartRouterfor30minutes.Duringthe30minutes,otherSmartPointsmaybe

acvated.

Aer30minutes,verifytheoperaonofthedeviceinSmartView.FindtheserialIDoftheSmartPointinthelistofyourdevicesin

SmartViewandverifythatoneormorereadingsoftheSmartPointhaveappeared.

4. SmartPoint operation

Aeracvaon,theSmartPointmeasuresandreportssensorvaluesbasedonafactoryconguredinterval.Measurementpoints

arealsostoredintheSmartPointwhennoradioconneconcanbeestablished.ThismakestheSmartPointsuitabletomonitor

goods during shipment.

User Manual SmartPoint/SmartPoint One

CHECKTRACECONTROL

4.1 Mounting

TheSmartPointhasasinglemounngholeinthecenterofthecasing.Thiscanbeusedinvariouswaystoaachthedevicetothe

requiredsurface(e.g.bolt,cord,orewrap).

Warning:Avoidtheuseofmetallicormagnecalmaterialsforthemounngmaterial.

Info:TheplacementoftheSmartPointand/orthematerialssurroundingit,canhavea(negave)impactontheradiorange.Pre-

vent the use of any metallic materials around the device. Install the device with an air gap of >4 cm from walls.

SL-SP-T/ERS mounting

Status: door closed Status: door opened

MEDER

Magent M04 H6 / 8

Model:SL-SP-T/ERS

ArticleNo:905-SMPT-024-016

00:0e

MEDER

Magent M04 H6 / 8

Model:SL-SP-T/ERS

ArticleNo:905-SMPT-024-016

00:0e

InstalltheSmartPointT/ERSwithexternalreedsensorasdepictedabove.

Warning:Ensurethattheexternalsensorcablecannotbepulledoutofthedevice.Anyforceappliedtothecablemaycauseda-

mage,evenifthedamageisnotvisiblefromoutside.Thecablehaslimitedpullrelieve.

SL-SP-T/H and SL-SP-T/HO mounting

•Ensurethatproperairowispossiblearoundtherelaveairhumiditysensor.

•Donotblocktheopeningofthesensor.

•Keepthesensorclean.Dustandcondensaononthesensormembranecancauseanunwantedeectonthesensor.

•Donotspraywaterdirectlyonthesensoropening.Thismaydamagethemembraneprotecngthesensorandelectronics.

Magnet Magnet

Reed-

sensor

Reed-

sensor

Smart-

Point

T/ERS

Smart-

Point

T/ERS

Status: door closed Status: door opened

User Manual SmartPoint/SmartPoint One

SL-SP-T/1W and SL-SP-T/1WO mounting

Example:Installaoninanairfreightcontainer.

InstalltheSmartPointT/1WorT/1WOwithexternaltemperaturesensorasdepictedabove.

Warning:Ensurethattheexternalsensorcablecannotbepulledoutofthedevice.Anyforceappliedtothecablemaycauseda-

mage,evenifthedamageisnotvisiblefromoutside.Thecablehaslimitedpullrelieve.

4.2. Extended sleep

WhenaSmartPointcancommunicatewithaSmartGateorSmartRouter,itimmediatelytransmitsameasurementpointwhenit

becomesavailable.ThemeasurementpointwillbeavailableinSmartViewwithinserveralminutes.

IftheSmartPointisoutsidetherangeofaSmartLinenetwork,itenters“extendedsleep”mode.Inthismode,theSmartPoint

connuestomeasureasregular,however,itdoesnotaempttotransmit.

Informaon:SmartPointsarenottransmingwhenoutsideSmartLinenetworkrangeandarethereforeallowedtomonitorair-

cargobymostairlines.Please,checkwithairlinebeforeuse.

WhenaSmartPointiswithinrangeofaSmartGateorSmartRouter,thedeviceautomacallyexitsthe“extendedsleep”mode.

Thismaytakeupto30minutes.Aer30minutes,newmeasurementpointsappearinSmartView.

Tip:WhenaSmartPointisswipedoveraSmartMat,it

immediatelyexitsthe“extendedsleep”modewhenin

rangeofaSmartGateorSmartRouter.

CHECKTRACECONTROL

Model:SL-SP-T/ERS

ArticleNo:905-SMPT-024-016

00:0e

ControlPanel

(outsideCon-

tainer)

SmartPoint

T/W

External

Sensor

(insideContai-

ner)

User Manual SmartPoint/SmartPoint One

CHECKTRACECONTROL

4.3. Logging

WhentheSmartPointcannotestablishconneconwithaSmartGateorSmartRouter,measurementsarestoredinthememory

ofadevice.SmartPointshavecapacitytostore8000measurementpoints,whichequalscirca3monthsofmeasurementdata(at

standardlogginginterval).

ThestoredmeasurementpointsareautomacallytransmiedtoSmartViewwhentheSmartPointcanreestablishaconneconto

aSmartGateorSmartRouter.

Informaon:Insomecases,theSmartPointisnotabletotransmitallstoredmeasurementsamples.Ensurethatthedeviceis

placedinthenetworkrangefromaSmartGateorSmartRouter.Persistentweakradiolinksaectthedatacommunicaonsuccess

rateseverlyandtheSmartPointisnotabletosendthestoreddata.Thestoredmeasurementpointsaretransmiedatarateof4

measurement points per minute.

EnsurethataSmartPointislongenoughinrangeoftheSmartLinenetworktosendallstoredinformaon.E.g.oneweekofstored

data(atstandardlogginginterval)istransferredincirca4hoursaertheSmartPointwasbroughtintorangeofaSmartLinenet-

work.

WhenaSmartPointhasbeenmonitoringashipmentoutsidetherangeofaSmartLinenetwork,butisnowinsideanetworkagain,

thecurrentmeasurementsarevisible,whilesimultaneouslythestoredmeasurementsaretransmied.InSmartView,adatagap

maybevisibleduringthemeittakestheSmartPointtotransmitstoreddata.

EventhoughtheSmartPointneedsmetotransmitstoredmeasurements,itenablesyoutoactuponreal-mealarmswhenever

it is in range of a SmartLine network.

4.4. Operational check in active mode

ItisrecommendedtotestandinspectSmartPointsinacvemoderegularly.

• Never use SmartPoints with damaged or open enclosure.

• Never use SmartPoints with damaged external sensor.

•NeveruseSmartPointswithdamagedbaerypack.

•NeveruseaSmartPointwithdamagedlabel.

•NeveruseSmartPointswithpunkturedmembraneofhumiditysensors

AlthoughSmartPointsreportalarmstoSmartViewwhentheirbaeryislow,itisgoodpraccetoverifydevicesbeforetheyare

usedforcricalmonitoring.Useaerthedenedusefullifemeisunreliableandshouldnotbeusedforcricalmonitoring.

ThereareafewmethodstocheckiftheSmartPointisslloperaonalandhasnotrunoutofbaerypower.

1.AeraSmartPointhasbeenacvated,every45secondstheLEDwillshortlyash.

Tip:DirectsunlightorotherbrightlightsourcemaymakeitdiculttonocetheshortLEDblink.Checkthedeviceinshadowor

dimmedlightcondions.

2.WhenanacveSmartPointisswipedacrosstheSmartMat,theLEDwillashimmediately.

Informaon:FlashingoftheLEDmeansthattheSmartPointisfunconing.TheLEDdoesnotindicateiftheSmartPointiscon-

nected or not.

3.PeriodicallyreviewthestatusoftheSmartPointinSmartView.Nolowbaeryindicaonsshouldbepresentandthelast

reportedmessageshouldberecent.

WhenSmartViewindicatesthatthebaeryofaSmartPointislowand/orthedevicedoesnotshowLEDacvity,theSmartPoint

shouldnolongerbeused.

4.5. Operational check before use as monitoring device in a shipment

WhenaSmartPointisgoingtobeusedasamonitoringdeviceinashipment,itisimportanttoallowittosetitsinternalclock

correctlybeforeitleavetheSmartLinenetwork.

SwipetheSmartPointacrossaSmartMatwhilethedeviceis<5mawayfromacveSmartGateorSmartRouter.TheLEDofthe

SmartPointmustash.KeepthedeviceneartheSmartGateorSmartRouterfor5minutes.Thenitisreadytobeusedforship-

ment monitoring.

5. Calibration

Berlingeroersacalibraonservicewhichallowsthecalibraonoftheinternalsensor(s).

•Withoutcalibraon,thesensoraccuracyisasstatedintableSmartPointModels.

•Calibraonisonlyvalidduringtheperiodstatedonthecalibraoncercate.

User Manual SmartPoint/SmartPoint One

CHECKTRACECONTROL

6. Important Information

6.1. Storage and active mode conditions

•Beforeacvaon,theSmartPointmustbestoredbetween10°Cand25°Cinanon-condensingenvironment.

•Aeracvaon,acceptableoperaonaltemperatureis–40°Cto+85°C.

•DonotexposetheSmartPointtomechanicalimpact/forceexceedingthenormdenedinEN60068-2-31:2008andEN60068-2-

6:2008.

•TheSmartPointhasbeendesignedtoberesistanttomoistureanddustcondionsthatcanbeexpectedinwarehouses,during

transportaon,storageinfridges/freezersetc.Ithasnotbeendesignedforoutdooruse.Donotpuncturethemembraneofthe

relaveairhumiditysensor.

Warning:Donotfullysubmergetheproductinwater.Excessiveexposuretodirectsunlightmaycausediscoloraonoftheenclo-

sureand/orreduconofthemechanicalrobustness.Donotusehigh-pressurecleaningdirectlyontheSmartPoint.Donotuse

chemicals to clean the SmartPoint.

6.2 Liability

Themanufacturershallnotbeheldliable:

•Ifthedevicewasusedbeyondthemanufacturer’sgivenlimitaons.

• For any claims due to the improper storage and use of the device.

•Foranyproblemswiththetemperaturecontrollingand/orcoolingunit.

•Forthebadqualityofanymonitoredgoods.

•Forincorrectreadingsifthedevicewasusedbeyonditsexpirydate.

Warranty:SmartPointandSmartPointOne1yearfromdateofdelivery.Baerypackisexcludedfromwarranty.

6.3 Battery

TheSmartPointscontainanon-rechargeableLithiumbaery.Pleasepaystrictaenontothefollowingpoints:

•ThehousingoftheSmartPointmustneverbeopenednordestroyed.

•NeverexposetheSmartPointtotemperaturesabovetheallowedrange(re,oven,microwaves,etc.).

It may cause serious injuries.

• Always keep the SmartPoint out of the reach of children.

•ThebaerycomplieswithIATADGRPackagingInstrucon970Secon2andisthereforenotconsideredasdangerousgood.

ConsultIATAregulaonbeforeuseinairfreight.

•DisposeorrecycletheSmartPointinaccordancewiththeWEEE2012/19/EUguidelinesoryourlocalregulaons.

Thedevicemayalsobereturnedtothemanufacturerforproperrecycling.

7. Regulatory information

FCC INFORMATION (USA):

ThisdevicecomplieswithPart15oftheFCCRules.Operaonissubjecttothefollowingtwocondions:1.Thisdevicemaynot

causeharmfulinterference,and2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseun-

desiredoperaon.Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant

topart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableproteconagainstharmfulinterferenceinaresiden-

alinstallaon.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance

withtheinstrucons,maycauseharmfulinterferencetoradiocommunicaons.However,thereisnoguaranteethatinterference

willnotoccurinaparcularinstallaon.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionrecepon,which

canbedeterminedbyturningtheequipmentoandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore

of the following measures:

• Reorient or relocate the receiving antenna.

•Increasetheseparaonbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Cauon:Anychangesormodicaonsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser‘s

authoritytooperatethisequipment.

User Manual SmartPoint/SmartPoint One

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Altro popolari di altre marche

GO Industries

GO Industries 38017 Manuale utente

Cissell

Cissell 30LBCMAN2 Manuale utente

RIDGID

RIDGID K-60SP Manuale utente

Gage Bilt

Gage Bilt GB751SH-5 Manuale utente

OVE

OVE SIERRA 60 Manuale utente

ReelCraft

ReelCraft 7800 OLB21 Manuale utente

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Manuale utente

ROBLIN

ROBLIN DROP Guida utente

EMG

EMG EMG-ACB BARREL Manuale di servizio

MiniSolar

MiniSolar MT-150 Manuale utente

Parkside

Parkside PSZ 250 B2 Manuale utente

ABB

ABB REM 610 Manuale del prodotto

Parkside

Parkside 55992 Manuale del proprietario

Skyjacker

Skyjacker F250 Manuale utente

IBM

IBM IBM SYSTEM Z Guida all'installazione

Grech Motors

Grech Motors G28 Manuale utente

NOVAK

NOVAK BATTERY CARE SHEET Guida

Telemotive

Telemotive blue PiraT Mini Guida utente