Smartlock Digital Axessor CIT Manuale utente

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf

Subject to change without prior notice Page 3

Axessor CIT

System overview - Electronic safe lock Axessor CIT

12345678

Type

Part No.

Serial No.

Version

Certs.

Axessor

XXXXXXXXXX

XXXXX.XXXXXX/XXX

xxxxx.xx 2008

VdS

2625

OM_Axessor_CIT_V024_20170518_EN.pdf Operating Manual

Page 4 Subject to change without prior notice

Axessor CIT

Input Unit

1 Housing

2 Connection cable to lock unit

3 Interface (USB) for PC connection

4 <ENTER> key (enter, confirm)

5 <INFO/ESC> key (activate info display or escape/go back to upper

level)

6 Battery compartment

7 <MODE> key (activate Programming Mode)

8 <LEFT> and <RIGHT> key (directional keys to navigate)

9 <0>...<9> (numeric keys 0...9)

10 <DEL> key (delete, close lock)

11 LCD (liquid crystal display)

12 Buzzer

Lock

13 Lock housing

14 Terminal blocks (Inputs/Outputs)

15 Pin for cable tie holder

16 Connecting socket X1 (cable from input unit) and X2 (external power

supply or cable from eBox)

17 Warranty seal

18 Type label

19 VdS-label (protects spring bolt setting screw)

20 External power supply (option)

eBox (Option)

21 Power supply eBox (accessory)

22 eBox connector

23 eBox

24 Fixation supports

25 Network status LEDs

26 RJ45 socket (network connection)

27 Reset opening

28 Connecting sockets (cable to lock unit)

29 eBox status LED

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf

Subject to change without prior notice Page 5

Axessor CIT

Content

1 Introduction 10

1.1 To the very beginning 10

1.2 Notes regarding the Operating Manual 10

1.2.1 Validity 10

1.2.2 Target group 10

1.2.3 Limitation 10

1.2.4 Supplementary documentation 10

1.2.5 Symbols used in this operating manual 11

1.2.6 Text marking 11

2 Safety and Environment 12

2.1 General 12

2.2 Qualification of personnel 12

2.3 Prohibited modifications to the unit 12

2.4 Environment 12

3 Product overview 13

3.1 Product description 13

3.2 Field of application 15

3.3 Intended use 15

3.4 Operating modes of the Axessor CIT 15

3.5 System components 18

3.5.1 Axessor CIT lock 18

3.5.2 AS280-INSW activation software 18

3.5.3 AS284-USBW or AS284-NETW programming software 18

3.5.4 AS274 server management software 18

3.5.5 APHI (Application Programming Hardware Interface) 18

4 Installation 19

4.1 Important information prior to the installation 19

4.2 Unpacking and checking the delivery 19

4.3 Installing the Input Unit 20

4.4 Installing the lock 25

4.5 Perform wiring check after lock installation 27

4.6 External connections at the lock 28

OM_Axessor_CIT_V024_20170518_EN.pdf Operating Manual

Page 6 Subject to change without prior notice

Axessor CIT

4.7 Installing the eBox 30

4.8 External connections at the eBox 31

4.9 Perform wiring check after eBox installation 33

5 Operating 34

5.1 Operating and display elements of the Input Unit 34

5.2 Programming mode 35

5.3 Operating modes 35

5.4 Immediate Time Lock 35

5.5 Information menu 36

5.6 Buzzer signals 37

5.7 Status messages 37

5.7.1 Locked (mode S) 37

5.7.2 Locked (mode I) 37

5.7.3 Open (modes S and I) 38

5.7.4 Immediate time lock (modes S and I) 38

5.7.5 Weekly time lock (modes S and I) 38

5.7.6 Holiday time lock (modes S and I) 38

5.7.7 Ready for entry of combination (mode I) 38

5.7.8 Entry of the opening combination (mode I - OTC) 38

5.7.9 Entry of the opening combination (mode I - ICS) 38

5.7.10 The close seal is displayed (mode I) 39

5.7.11 Post-access delay (modes S and I) 39

5.7.12 Opening time delay (mode I) 39

5.7.13 Opening time delay (mode S) 39

5.7.14 Confirmation after elapse of Time Delay (mode S) 40

5.7.15 Enter second code - Dual Mode activated (mode S) 40

5.7.16 Penalty after wrong trials (mode S and I) 41

5.7.17 Remote disabling (mode S and I) 41

5.7.18 Remote enabling (mode S and I) 41

5.7.19 Identification with denied code / Non Return Time Delay enga-

ged (mode S) 41

5.7.20 The battery compartment has been opened (mode S and I) 42

5.7.21 Connected with Programming Software (mode S and I) 42

5.7.22 External power supply available (mode S and I) 42

5.8 Access Codes 43

5.8.1 Code hierarchy and code formats 43

5.8.2 Code types 43

5.8.2.1 Master Code 44

5.8.2.2 Manager Codes 44

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf

Subject to change without prior notice Page 7

Axessor CIT

5.8.2.3 User Codes 45

5.8.2.4 Courier Code 46

5.8.3 Shelve Function 46

5.8.4 Duress Code 46

5.8.4.1 Duress Code in bank mode 46

5.8.4.2 Duress Code in interactive mode 47

5.9 Code entry 48

5.10 Opening procedure 49

5.10.1 Opening procedure in bank mode 49

5.10.2 Opening procedure in ICS mode 51

5.10.3 Opening procedure in OTC mode 52

5.11 Closing procedure 53

5.11.1 Closing procedure in bank mode 53

5.11.2 Closing procedure in interactive mode 53

6 Programming Mode 54

6.1 Operating the programming mode 54

6.1.1 Activating the programming mode 54

6.1.2 Navigating in the Programming Mode 55

6.1.3 Modify and save settings in the Programming Mode 55

6.1.4 Exiting the Programming Mode 56

6.2 Menu overview 57

6.3 Access rights 58

6.4 Programming 59

6.4.1 Menu TIME 59

6.4.1.1 Setting the time - submenu TIME 59

6.4.1.2 Setting the time - submenu DATE 60

6.4.1.3 Setting the time format - submenu AM/PM 61

6.4.1.4 Setting the daylight saving time - submenu DST 61

6.4.2 Menu PROG 62

6.4.2.1 Activating an Immediate Time Lock - Submenu IMM-TL 62

6.4.2.2 Configuring Weekly Locking Periods - Submenu WEEKLY 63

6.4.2.2.1 Adding a Weekly Locking Period 63

6.4.2.2.2 Modifying an existing Weekly Locking Period 64

6.4.2.2.3 Deleting an existing Weekly Locking Period 64

6.4.2.3 Configuring Holiday Locking Periods - Submenu HOLIDAY 65

6.4.2.3.1 Adding a Holiday Locking Period 65

6.4.2.3.2 Modifying an existing Holiday Locking Period 66

6.4.2.3.3 Deleting an existing Holiday Locking Period 66

6.4.2.4 Configuring Time Lock interruption - Submenu TL-INT 67

6.4.2.4.1 Adding a

Time Lock interruption 67

6.4.2.4.2 Modifying an existing Time Lock interruption Period 68

6.4.2.4.3 Deleting an existing Time Lock interruption Period 68

OM_Axessor_CIT_V024_20170518_EN.pdf Operating Manual

Page 8 Subject to change without prior notice

Axessor CIT

6.4.2.5 Configuring Time Related Function - Submenu TR-FNC1..3 69

6.4.2.5.1 Adding a Time Related Function 69

6.4.2.5.2 Modifying an existing Time Related Function 71

6.4.2.5.3 Deleting an existing Time Related Function 71

6.4.3 Menu DELAY 72

6.4.3.1 Setting/Deactivating Time Delays - Submenus DELAY 1...4 72

6.4.3.2 Configuring the Confirmation Window - Submenu CNF WIN 74

6.4.3.3 Configuring the Non Return Time delay - Submenu NRTD HM 75

6.4.3.4 Configuring the opening delay of Duress Alarm - Submenu D-

ALARM 75

6.4.3.5 Configuring the Window to enter second code in Dual Mode -

Submenu DUAL bank 76

6.4.3.6 Configuring the Bolt Open Time for bank mode - Submenu BLT

OPN bank 76

6.4.3.7 Configuring the Bolt Open Time for CIT mode - Submenu BLT

OPN cit 77

6.4.3.8 Configuring the Window to enter a one time code - Submenu

PROCTIM cit 78

6.4.3.9 Setting OTM Time Delay - Submenus DELAY cit 78

6.4.3.10 Configuring the opening delay of OTM Duress Alarm - Submenu

DURESS cit 79

6.4.4 Menu CODE 80

6.4.4.1 Changing the Master Code - Submenu MASTER 80

6.4.4.2 Setting Manager Codes - Submenu MANAGER 81

6.4.4.3 Setting User Codes - Submenu USER 82

6.4.4.4 Setting the Courier Code - Submenu COURIER 84

6.4.4.5 Reset the whole Axessor CIT safe lock system to factory def-

aults - Submenu SHELVE 85

6.4.4.6 Modifying a code 86

6.4.4.7 Deleting a code 87

6.4.5 Menu MISC 88

6.4.5.1 Setting the display language - Submenu LANG 88

6.4.5.2 Enabling/disabling Remote Disable - Submenu RMT-DIS 88

6.4.5.3 Setting the Beeper Volume - Submenu Volume 89

6.4.5.4 Enabling/disabling Open Beeper - Submenu OPEN beep 89

6.4.5.5 Enabling/disabling Confirmation Window Beeper - Submenu

CNF WIN beep 90

6.4.5.6 Enabling/disabling Delay Notify Beeper - Submenu DELAY beep

6.4.5.7 Enabling/disabling Duress Delay Notify Beeper - Submenu D-

ALARM beep 91

6.4.5.8 Enabling/disabling Wait time display - Submenu WAIT info 91

6.4.5.9 Enabling/disabling Language in display - Submenu LANG info

6.4.5.10 Activating/Deactivating Code Denial - Submenu CDE DEN

bank 92

6.4.5.11 Activating/Deactivating Duress Code function -

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf

Subject to change without prior notice Page 9

Axessor CIT

Submenu DURESS bank 93

6.4.5.12 Activating/Deactivating Dual Mode - Submenu DUAL bank 94

6.4.5.13 Enabling/disabling One Shot Codes - Submenu ONE SC4 bank

6.4.5.14 Enabling/disabling Time Lock for OTM - Submenu TL LOCK cit

6.4.5.15 Enabling/disabling Non Return Time Delay - Submenu NRTD cit

6.4.5.16 Display the current time - Submenu TIME cit 97

7 Servicing 98

7.1 Cleaning 98

7.2 Replacing the batteries 98

7.3 Customer Service 99

7.4 Spare parts and accessories 100

8 Error messages 101

9 Technical data 104

9.1 Functions 104

9.2 Electronics 107

9.3 Mechanics 108

9.4 Approvals and Certificates 109

9.5 Factory settings 110

OM_Axessor_CIT_V024_20170518_EN.pdf Operating Manual

Page 10 Subject to change without prior notice

Axessor CIT

1 Introduction

1.1 To the very beginning

We thank you for having opted for the Axessor CIT electronic safe lock

with network capabilities.

The Axessor CIT electronic safe lock incorporates the latest technical ad-

vances and meets all recognized safety standards. Nevertheless, improper

use of the Axessor CIT electronic safe lock may result in impairment of

material assets.

To ensure a safe, proper, and economical operation of the Axessor CIT

electronic safe lock, please observe and comply with all information and

safety instructions contained in the present Operating Manual as well as

the instructions given in the manuals for the components used in conjunc-

tion with the safe lock.

If you have questions, which are not or insufficiently answered in this

Operating Manual, please contact your supplier. They will be glad to assist

you.

1.2 Notes regarding the Operating Manual

1.2.1 Validity

This Operating Manual describes the Axessor CIT electronic safe lock.

1.2.2 Target group

This Operating Manual addresses itself to well trained personnel which is

in charge with the installation, the commissioning, the operation, the ser-

vicing and the trouble shooting of the Axessor CIT electronic safe lock.

1.2.3 Limitation

This Operating Manual is restricted to the installation, commissioning,

operation, servicing and trouble shooting of the Axessor CIT electronic

safe lock.

The available options (AS280-INSW Installation Software and AS284-US-

BW or AS284-NETW Programming Software) are only described insofar

as this is necessary for proper operation of the safe lock. Further informa-

tion on the optional software packages can be obtained in the respective

help function of the corresponding software.

1.2.4 Supplementary documentation

This operating manual is supplemented with the Axessor CIT Quick Refer-

ence Guide.

Operating Manual OM_Axessor_CIT_V024_20170518_EN.pdf

Subject to change without prior notice Page 11

Axessor CIT

1.2.5 Symbols used in this operating manual

The following symbols are used in this operating manual to direct your

attention on particular situation, e.g. to indicate a hazardous situation,

requirements which must be met, etc.:

Warning!

Indicates a hazard which can cause damage to the unit or have a serious

effect on the function or use of the unit if unobserved.

Important!

Indicates important information which must be observed during the de-

scribed procedure.

Note!

Indicates notes, information or pointers, which facilitate work or provide

additional background information or point out specific details.

Requirement!

Indicates requirements that must be met for the execution, activation,

modification or deletion of the described function. These requirements

must be met before proceeding.

AS284-USBW or AS284-NETW Programming Software

Refers to the AS284-USBW or AS284-NETW Programming Software (op-

tionally available), which allows additional settings and functions.

1.2.6 Text marking

• The character „“ stands for „see“, „refer to“ or „also consult“

Sample: for a description of Access Code Hierarchy (Code hierarchy

and code formats on page 43).

• Text appearing on the display is marked in capitals and set into quota-

tion marks (sample: „LOCKED“).

• Keys to be used are marked in bold capitals and set into angle brackets:

<DEL> = Delete key

<NUMERIC> = Numeric keys 0…9

<INFO/ESC> = Information/Escape key

<ENTER> = Enter key

<MODE> = Mode key

<LEFT> = Left arrow key

<RIGHT> = Right arrow key

Indice

Altri manuali Smartlock Digital Serratura

Smartlock Digital

Smartlock Digital LG Master Manuale utente

Smartlock Digital

Smartlock Digital Axessor USB Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente