4
Battery
Checking the Battery Status
To check the battery status, press ‘Battery Check’
button. Please check before using it.
If the battery does not remain enough, please use it
after charging.
Charging the Battery
Connect the charger to the battery
then charge until the full charge(ALL 4 LED lights
are on) is indicated on the battery LED.
It will take about 3 hours to charge the totally
drained battery to 100%.
Battery Setting
Mount the battery onto the battery compartment then
push it completely until the locking lever clicks
in place as indicated direction of the arrow.
To remove the battery, slide the locking button in the
direction of arrow A then remove the battery.
*The battery performance may be reduced depending
on the period and number of battery use.
To avoid any shooting troubles with low battery,
charge the battery always before using.
*This battery is possible to purchase additionally.
