Shower Stretcher Fixed Height 5
5.0 SURVEYING AND INSTALLATION
If in any doubt, ALWAYS seek ADVICE.
Always turn screws clockwise to tighten or anti-clockwise to loosen.
5.1 SURVEYING PROCEDURES
• Shower stretchers are often installed in small rooms with limited space. In such
circumstances it is vitally important to take accurate measurements of the whole
room in question, and make a plan to scale if possible.
• Ensure that the intended wall for installation is strong enough to support
the weight of the stretcher plus the patient.
• If the wall is of brick or concrete construction it will be strong enough to support
the equipment without need of the backing board.
• If the wall is of hollow or soft insulation block construction, then we would always
recommend the backing board is used.
• Check for the position of dado rails, window sills, electrical power points, switches,
etc. which may adversely affect the installation.
• Check there is sufficient room around other facilities, e.g. wash basins, toilets, etc.
• Remember to take into account the guard rail dimensions (accessory).
• Check that access to doorways is still possible.
• Inspect the wall to see if padding/spacing is required to correct wall imperfections.
If in any doubt, ALWAYS seek PROFESSIONAL ADVICE.
5.2 INSTALLATION TOOLS REQUIRED
• Electric drill, with appropriate drill bits for wood and masonry
• Set of spanners
• Tape measure
• Spirit level
• Hammer
• Screw driver set
• Personal Protection Equipment (PPE); gloves, safety glasses.
