Smitec POSYC 3401 Manuale di servizio
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 1
Smitec S.p.A., viale Vittorio Veneto 4, 24016 San Pellegrino Terme (BG), Italy, www.smitec.it
Installation, use and maintenance manual
INDUSTRIAL COMPUTERS
POSYC 3401/3402
BEFORE STARTING UP THE INDUSTRIAL COMPUTERS POSYC 3401/3402, CARE-
FULLY READ THIS MANUAL AND FOLLOW ALL INSTRUCTIONS, IN ORDER TO EN-
SURE MAXIMUM SAFETY
The technical data and the drawings in this manual might have been modified later; always
refer to the latest version.
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 2
Summary
1 Preface ....................................................................................................................................................... 3
2 General warnings ...................................................................................................................................... 4
3 Safety instructions .................................................................................................................................... 6
3.1 General information ............................................................................................................................ 6
3.2 Precautions during handling and assembly ........................................................................................ 6
4 Product description .................................................................................................................................. 7
5 Technical data ........................................................................................................................................... 8
5.1 Electrical characteristics ..................................................................................................................... 8
5.2 Electrical characteristics ..................................................................................................................... 8
5.3 Mechanical characteristics .................................................................................................................. 9
5.3.1 Mechanical dimensions ............................................................................................................... 9
5.3.1.1 Front view ............................................................................................................................ 9
5.3.1.2 Side view ........................................................................................................................... 10
5.3.1.3 Rear view (recommended panel cut)................................................................................. 11
5.4 Hardware features ............................................................................................................................ 12
5.4.1 Basic hardware ......................................................................................................................... 12
5.4.1.1 POSYC 3401 ..................................................................................................................... 12
5.4.1.2 POSYC 3402 ..................................................................................................................... 12
5.5 Order codes ...................................................................................................................................... 13
5.6 Accessories ....................................................................................................................................... 13
6 Connections and LEDs ........................................................................................................................... 14
6.1 Top panel view .................................................................................................................................. 14
6.2 Side panel view ................................................................................................................................. 15
6.3 PWR connector ................................................................................................................................. 16
6.4 Ethernet ports ................................................................................................................................... 18
6.5 FLXIO port ........................................................................................................................................ 19
6.6 I/O connector .................................................................................................................................... 20
7 Installation ............................................................................................................................................... 22
7.1 Panel mounting ................................................................................................................................. 22
7.2 Environmental requirements ............................................................................................................. 22
7.3 Electrical connections ....................................................................................................................... 23
8 Use ........................................................................................................................................................... 24
8.1 Touch screen .................................................................................................................................... 24
8.2 Side USB ports ................................................................................................................................. 24
8.3 Micro SD card ................................................................................................................................... 25
9 Ordinary maintenance ............................................................................................................................ 26
9.1 Cleaning the touch screen sensor .................................................................................................... 26
9.2 Replacing the clock battery ............................................................................................................... 26
10 Analytical index ..................................................................................................................................... 27
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 3
1 Preface
This manual provides all necessary information for the installation, use and maintenance of industrial comput-
ers POSYC 3401/3402.
The instructions included in this manual are addressed to the following professionals:
The present instructions must be made available to all the above individuals.
User User is a person, a company or an institution that buys the equipment and
uses it for the purposes it was designed for.
User/operator User or operator is a person authorized by the user to operate on the equip-
ment.
Specialized personnel It refers to all persons with specific competence, able to recognize and avoid
the dangers deriving from the use of the equipment.
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 4
2 General warnings
These assembly instructions are an integral part of the equipment, and must be kept for future reference until
decommissioning.
The user should be informed that the present instructions reflect the state of the art at the moment when the
equipment was sold; they will remain fully acceptable despite subsequent upgrades based on new experienc-
es.
In order to make the manual consultation easier, the following symbols have been adopted:
DO NOT USE THE EQUIPMENT, NOR MAKE ANY INTERVENTION BEFORE INTE-
GRALLY READING AND UNDERSTANDING THIS MANUAL.
IN PARTICULAR, ADOPT ALL SAFETY PRECAUTIONS AND PRESCRIPTIONS INDICATED IN THIS
MANUAL.
THE EQUIPMENT CANNOT BE USED FOR PURPOSES DIFFERENT THAN THE ONES DESCRIBED IN
THIS MANUAL; SMITEC S.p.A. SHALL NOT BE HELD RESPONSIBLE FOR ANY DAMAGES, INCON-
VENIENCES OR ACCIDENTS DUE TO THE NON-COMPLIANCE WITH THESE PRESCRIPTIONS.
Indication of “PROHIBITED ACTION”.
The symbol "DANGER" is used when the non-respect of the prescriptions or the tampering
of organs can cause serious harm to people or things.
The symbol “USE OF INDIVIDUAL PROTECTIONS” means that protective gloves must be
worn.
Indication of “INFORMATION OF PARTICULAR RELEVANCE”.
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 5
The safety prescriptions aim at establishing a series of behaviors and obligations to be complied with, while
performing the activities described later on in this manual.
These prescriptions constitute the prescribed method of operating the device, in a way that is safe for person-
nel, equipments and environment.
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 6
3 Safety instructions
3.1 General information
3.2 Precautions during handling and assembly
Do not install or use the equipment before integrally reading and understanding this manual.
In case of difficulties of interpretation, contact SMITEC technical service.
It is absolutely forbidden to use the equipment for different purposes than the ones de-
scribed in this manual. The technical data and the drawings in this manual might have been
modified later; always refer to the latest version. All upgrades can be requested to SMITEC
S.p.A. directly.
Make sure that the personnel is qualified and adequately informed about the risks he may
run and how to avoid them.
POSYC 340X series industrial PCs can be used only after the classification of the machine
operating area and after checking the safety levels, which must correspond to the assembly
safety levels.
Use adequate tools during the assembly, in order to avoid crushing or abrasions.
Metal components and sharp surfaces may cause cuts and tears. In case of contact, be very
careful and wear the personal protection equipment.
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 7
4 Product description
The POSYC is an ARM-based computer designed primarily as a human-machine interface (HMI) process-con-
troller, with I/O (depending on the model) and integrated FLXIO bus controller.
The user interface has a flat color display with a 7 “diagonal LED illuminated and a touch screen pointing sys-
tem integrated into the product.
The touch screen system offers features of robustness and ease of use, difficult to obtain with other common
pointing devices such as mouse, track-ball and mouse pad.
Being completely integrated into the appliance, it is particularly suitable even in industrial applications that re-
quire resistance to external agents such as dust, humidity, water, oils, etc., which would be harmful for standard
devices.
Since it is sufficient to exert a slight pressure with a finger on its surface to make an immediate pointing, this
system is the main “User Friendly” feature of the POSYC computer.
In order to meet the most different interfacing needs, POSYC nevertheless provides the possibility to connect
also standard input / output devices, such as keyboard, mouse, track-ball, monitor, etc.
The POSYC calculation capability is given by the ARM® Cortex® A9 i.MX6SX 1GHz processor with 1GB
DDR3L RAM memory.
The storage of data and programs on non-volatile support is entrusted to a 4GB micro SD memory.
The position of the device inside the POSYC is such that it can be extracted without opening it. The main ad-
vantage of the micro SD card is its exceptional resistance to accidental shocks and vibrations.
POSYC 340X
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 8
5 Technical data
5.1 Electrical characteristics
5.2 Electrical characteristics
The following characteristics refer to the standard POSYC computer load as supplied, without any connected
peripheral device.
All the technical information reported in this section are consistent with the hardware con-
figuration of the POSYC computer produced at the date of writing of this document. With the
aim of improving or updating the product technologically, SMITEC S.p.A. reserves the right
to change the technical features of the POSYC computer without notice.
Operating temperature 0° ÷ +50°C when operational
Storage temperature -20° ÷ +60°C when not operational
Relative humidity 0 ÷ 90% (without condensation)
Protection degree IP65 on the front (according to IEC 60529 and type 1 UL)
IP20 on the back (according to IEC 60529)
Maximum altitude 2000 m a.s.l
Main power supply voltage (PWR) 24 VDC (-15% ÷ + 20% according to IEC 61131-2) from
CLASS 2 power supply (UL)
Current consumption Max 0.40A @ 24VDC
Absorbed power Max 9.60 W
Auxiliary power supply voltage (I/O) 24 VDC (-15% ÷ + 20% according to IEC 61131-2) from
CLASS 2 power supply (UL)
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 9
5.3 Mechanical characteristics
5.3.1 Mechanical dimensions
5.3.1.1 Front view
The computers Posyc 3401/3402 need to be fixed on a stable and rigid panel provided with 4xM3 metal thread-
ed hole, min. 1.5mm deep. Use 4xM3x10mm Fe/Zn (not countersunk head type) screws, min. class 8.8, tight-
ened at 1Nm.
Fixing Front panel with 4 through holes of 3.2 mm
Weight Model 3401: 0.83 kg
Model 3402: 0.78 kg
Industrial computers POSYC 3401/3402 Installation, use and maintenance manual - EN
Ver. 1.03 10
5.3.1.2 Side view
Questo manuale è adatto per i seguenti modelli
1
Indice
