Smith Corona BT200 Manuale utente

Bluetooth Headset

User’s Manual

BT200

The unit is a wireless comfort Bluetooth® headset for mobile phones and

offices. When mobile phones replace the ordinary phones at the office, you

need a comfortable and ergonomic solution for those who spend long hours

on the phone. The unit such a solution, a truly comfortable headset with

good sound quality, built for comfortable all day wearing. As an accessory,

there is an USB Bluetooth dongle for the PC. With the dongle, you can

connect your headset to a computer and use it as an audio device for VoIP

applications, for example SkypeTM .

Features

 Bluetooth Version 4.2, with improved data transfer, security and connectivity.

 Up to 20 hours talk time.

 At least 96 hours stand by time

 Up to 30 meters working range (class 2)

 Voice guidance

 Volume control buttons

 Answer button

 Dedicated microphone mute button

 Last number re-dial

 Low battery indication

 Adjustable headband and soft ear cushion for all day wearing comfort

 LED status indication

 Charging cradle(Option)

Introduction

Available in Monaural or Binaural

What’s inside

Direct Charging from USB port of PC

If the headset has been out of use for some item, it may take up to 2 hours to

charge it fully. Normal charging time is 2-3 hours. Low battery is indicated by the

flashing red LED on the headset.

Headset Hanger USB charging cable

Overview

Headset Hanger : For your convenience, fix the

headset hanger on any place available.

Optional Accessories

Charging stand

BT-200 Bluetooth dongle

Both the charging-stand and micro USB cable can be plugged into either a computer

or wall charger.

Attaching the headband

To attach the microphone boom arm to the headband, align the triangle shape on

the microphone boom arm with the triangle shape on the headband and push to

click into place. The microphone boom arm will then rotate to your required

position.

Detaching the headset

To detach the microphone boom arm from the headband, gently push the

microphone speaker from inside the ear cushion. This will pop the microphone

boom away from the headband

IMPORTANT: Do not pull on the microphone boom to remove it from the headband.

Positioning the Microphone

The microphone boom arm is flexible, so you can gently

bend the boom and position it to suit the curve of your face.

Holding the headset, rotate the headband to bring the boom

close to your cheek.

The ideal placement for the microphone is usually

at the corner of your mouth, not in front of it,

and about an inch from your face.

Be sure that the side of the microphone is pointed

toward your mouth.

Turn on the headset

Press and hold the ‘answer’ button for 2 seconds. Release the button when the LED

flashes 3 times and ‘Power on’ is heard in the speaker.

Turn off the headset

Press and hold the ‘answer’ button for 3 seconds. Release the button when the LED

flashes red 3 times and ‘Power off’ is heard in the speaker.

Prior to using the headset, it must be paired and connected to another Bluetooth

device, such as a mobile phone. For specific instructions, check the users guide of

your phone.

General procedure

 Turn on Bluetooth on your phone

 Put the headset in pairing mode (make sure the headset is switched off, press

and hold the answer button for 1 sec until the LED flashes red rapidly)

 Perform a search for Bluetooth devices on your phone.

 Connect to >>device logo<< when found.

 Blue LED is On and ‘Pairing done, Connected’ is heard in the speaker when

pairing is completed

Different phones have different ways to handle Bluetooth devices. Read the users

manual of your phone for more info. Some phone for more info. Some phones will

connect to the headset automatically when it is within range, for example when you

return to your office. For other phones, it may be necessary to reconnect manually

when the connection has been broken.

Turning the headset on and off

Pairing

The pairing mode is active for 3 minutes. After that, the headset will enter standby

mode.

There are two different firmware versions for different languages. Each version

supports 3 different languages for user. The first version has English, Spanish, and

French voice prompts. The second version offers German, Italian, and Dutch voices.

To select languages, the headset should not connect to Bluetooth host. When the

headset is out of synchronization, press ‘answer’ button twice and selected

languages will be heard. To change it, press ‘answer’ button twice again and then

next available languages will be informed. If announced languages wants to be used,

just stay and use it.

Answer a call

 Press the ‘answer’ button briefly.

Reject a call

 Press the ‘answer’ button for 1 sec while incoming call, and ‘Call rejected’ is

heard in speaker.

Make a call

 Dial the number on the mobile phone and press the answer button briefly.

End a call

 Press the answer button briefly or end the call on the mobile phone.

Set Voice Prompt Language

Using the headset

NOTE: If your phone requires a pairing code please use 0000.

Last number redialing

 Press the answer button briefly twice and you can hear ‘Re-Dialing’ from speaker.

Mute On/Off

 Press and release the mute button and ‘Mute On’ is heard in speaker.

 Press again to resume the call and ‘Mute Off’ is heard in speaker.

Volume adjustment

 Press volume up/volume down to adjust the

listening volume. There is a small notch on

each volume button that makes them easy to

find. The headset listening volume can also

be adjusted on the phone.

Note that high listening volume settings may

cause echo or other noise on the line, for one

or both parties on the line. Try to lower the

listening volume if this is the case.

Important! – High listening volume settings

may be harmful to your hearing.

Safe and efficient use

Do not expose your product to humidity, liquid or extreme temperature conditions.

Such conditions, or other rough treatment such as dropping or bending the product

may damage it. Do not use any accessories or chargers other than original intended

for use with this product. Neither headset nor charger contain any user serviceable

parts, and must not be opened.

A Bluetooth device use radio signals to communicate with other devices. The power

of this radio signal is low, maximum 0.001 Watts. Do not use the product where it is

forbidden, for example in airplanes, at hospitals, in blasting areas or in explosive

atmospheres. Radio signals may interfere with other electronic devices, especially if

these are not shielded.

Permanent hearing loss may occur if headsets are used at high

listening volumes for longer periods of time. Set the volume to a safe

level. You can adapt to high listening volume over time, especially in a noisy

environment where the level of sound may seem normal even if the volume is high.

Reduce the time you use a headset with high listening volume.

Battery information

The device is equipped with a rechargeable Lithium-polymer battery. A new battery

will need a few charging cycles before it can reach maximum capacity. A fully charged

battery will loose its charge over time even if the headset is not used.

Battery capacity and life span may be reduced if the device is exposed to extreme

high or low temperatures, for example if it is left in a car. A device with a cold or hot

Technical information

battery may stop working until it is back to normal (room) temperature. Battery

capacity at temperatures below -0oC is reduced.

Never dispose of batteries in open fire since they may explode. Always dispose of

use batteries and electronic devices according to local recycling regulations.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

FCC notification to users

This equipment has been tested and found to comply with the limits for a CLASS B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference, the user is encouraged to try to correct

the interference by consulting with a dealer or an experienced technician for technical

assistance.

Any changes or modifications to the equipment not expressly approved by the party

responsible for compliance could void user’s authority to operate the equipment.

WARNING & SAFETY INFORMATION

The antenna(s) used for this device must be installed to provide a separation distance

of at least 20cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.

Troubleshooting

If you have problems connecting the headset to your phone, do as follows:

 Check that the headset is charged, turned on and within 10 meters of the phone.

 Check that Bluetooth is switched on your phone.

 Check that the headset is listed as a headset device in your phone and also

connected. You may need to re-connect to the headset

 Try removing the headset from the phone, then pair and connect again.

Some features are not possible to use with a certain phone:

 Check the user manual of your phone for missing settings or functions that needs

to be activated.

 Different mobile phone manufacturers may implement Bluetooth functions in

different ways. The unit should work with all phones that support the Headset

and Hands-free Bluetooth profiles, but functionality may vary depending on the

telephone model you use. You might also want to check for the latest firmware

for your phone.

Maintenance

Your headset is a technically advanced device containing circuit boards and fine

mechanics, made from top grade component. To increase reliability and life span,

Help and tips

always treat your headset with care.

 Do not expose the headset to moist, liquids, rain or dust.

 Store the product at a dry and dust-free location.

 For cleaning, use a dry cloth.

 Do not store a fully charged headset in the charging stand for longer periods of

time.

 Ear cushions are available as spare parts.

We will repair or replace, at our opinion, this product if found defective due to

materials or workmanship within the warranty period beginning from the original

date of purchase. This product is warranted by authorized representative for the

period specified.

The Original dated purchase receipt must be presented to the authorized service

center when service is rendered. On all carry-in models, transportation to and from

the service station is the responsibility of the purchaser.

This warranty does not cover damages due to accident, fire, flood, earthquake

and/or other acts of God; misuse, incorrect line voltage, improper installation,

improper or unauthorized repairs, commercial use or damages occurred in shipping.

Exterior and interior finish, lamps, glass, plastics parts and temperature probes are

not covered under this warranty. Customer adjustment according to the owner’s

manual are not covered under this warranty. This warranty is automatically void if

the serial number is missing or altered.

Warranty and service

Key Table

Indice

Altri manuali Smith Corona Cuffia

Smith Corona

Smith Corona Freedom III Manuale utente

Smith Corona

Smith Corona P14758 Manuale utente

Smith Corona

Smith Corona Freedom II Manuale utente

Smith Corona

Smith Corona HP-100 Manuale utente

Smith Corona

Smith Corona Classic Monaural Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente