Snakebyte SB91B230 Manuale utente

Instruction Manual

Bedienungsanleitung

Instructions d'utilisation

Manual de instrucciones

Manuale di istruzioni

Handleiding

Manual de operações

Instruktionsmanual

Bruksanvisningen

Instruktionsmanual

Käyttöohje

DUAL CHARGE &

HEADSET STAND 5™

Black/White

1. LED oplaadindicator

van de controller

2. Headset LED

oplaadindicator

3. PS5™-controlleraansluiting

4. Headset bevestiging

5. USB-A headset oplaadpoort

6. USB-C-voeding

1. Kontroller

LED-ladeindikator

2. Headset-ladings-LED

3. PS5™-kontrollerport

4. Hodesettfeste

5. USB-A-ladeport

for hodesett

6. USB-C strømforsyning

1. LED-Ladeanzeige

des Controllers

2. LED-Ladeanzeige

des Headsets

3. PS5™-Controller-Anschluss

4. Headset-Halterung

5. USB-A Headset-

Ladeanschluss

6. USB-C Stromversorgung

LED kontrolera

6. Zasilacz USB-C

1. LED-opladningsindikator

for controlleren

2. LED-opladningsindikator

for headset

3. PS5™ controller-stik

4. Headsetholder

5. USB-A opladningsport

til headset

6. USB-C strømforsyning

1. Indicateur de

charge LED du contrôleur

2. Indicateur de

charge LED du casque

3. Connecteur du

contrôleur PS5™

4. Support du casque

5. Port de chargement

USB-A du casque

6. Alimentation USB-C

1. Indicatore di carica

a LED del controller

2. Indicatore LED di

ricarica delle cuffie

3. Connettore del controllore PS5™

4. Supporto per cuffie

5. Porta di ricarica

delle cuffie USB-A

6. Alimentazione USB-C

1. LED-laddningsindikator

för styrenheten

2. Headsetets

LED-laddningsindikator

3. PS5™ kontrollerkontakt

4. Headsetfäste

5. USB-A laddningsport

för headset

6. USB-C strömförsörjning

1. Controller LED

charging indicator

2. Headset LED charging indicator

3. PS5™ controller connector

4.Headset socket

5. USB-A headset charging port

1. Indicador LED de

carga del controlador

2. Indicador LED de

carga del auricular

3. Conector del controlador PS5™

4. Soporte para auriculares

5. Puerto de carga de

auriculares USB-A

6. Fuente de alimentación USB-C

1. Indicador LED de

carga do controlador

2. Indicador de carga

LED dos auscultadores

3. PS5™ conector do controlador

4. Montagem de auscultadores

5. Porta de carregamento de

auscultadores USB-A

6. Fonte de alimentação USB-C

1. Ohjaimen LED-latausilmaisin

2. Kuulokkeiden

LED-latausilmaisin

3. PS5™-ohjaimen liitin

4. Kuulokkeiden kiinnitys

5. USB-A-kuulokkeiden

latausportti

6. USB-C-virtalähde

1 2 3 4 5 6

DUAL CHARGE & HEADSET STAND 5™ for PS5™

PRODUCT INFORMATION

Thank you for choosing snakebyte’s DUAL CHARGE & HEADSET STAND 5™. Please read this guide for important

safety and health information and retain it for future reference.

CONTENT

1 x DUAL CHARGE & HEADSET STAND 5™

1 x Charging cable 15 cm USB-A to USB-C

1 x Charging cable 15 cm USB-A to Micro USB

1 x Charging cable 100 cm USB-A to USB-C

OPERATING INSTRUCTION DUAL CHARGE & HEADSET STAND 5™

- Plug the power supply into the charger, the orange and blue lights will be on for 1 second for self-checking, and

then turn off after self-checking. If there is overvoltage or low voltage in the input power supply, the orange LED

light flashes quickly to give an alarm, and the input power supply needs to be disconnected and check the power

supply. Then reconnect to restore the charger function.

- Put the controller into the charger socket, if the controller needs to be charged, the orange LED light will be on,

indicating that it is charging; if the controller is fully charged, the orange LED light will be off, and the blue LED light

will be on, indicating that the charging is fully charged.

- Use the charging cable to connect the headset. If the headset needs to be charged, the orange LED light is on,

indicating that it is charging; if the headset is fully charged, the orange LED light is off, and the blue LED light is on,

indicating that the charging is fully charged. (If the power status of the connected headset is fully charged, the

orange light will be off and the blue light will be on after the charger charges it for 15 seconds approximately.)

- Input overvoltage and undervoltage protection function, if the input power supply voltage is greater than 5.7V, the

orange LED fast light flashes, overvoltage alarm, the charger will stop charging immediately; if the input power

supply voltage is less than 4.2V, the orange LED fast light flashes, Undervoltage alarm, the charger will stop

charging immediately. After overvoltage and undervoltage protection, it is necessary to disconnect and check the

power supply. Then reconnect to restore the charger function.

- Output overvoltage protection function, if the voltage of the charging output terminal is greater than 5.7V, the

orange LED flashes quickly to alarm, the charger will stop charging immediately, and the input power needs to be

disconnected and check the power supply. Then reconnect to restore the charger function.

- The maximum allowable load current of the charging port of the handle is 1500MA. If the load exceeds 1500MA,

the orange LED light flashes rapidly, and the charging port is over-current protected, and there will be no voltage

output. It is necessary to disconnect and check the power supply. Then reconnect to restore the charger function.

- The maximum allowable load current of the charging port of the headset charging is 800MA. If the load exceeds

800MA, the orange LED light flashes rapidly, and the charging port is over-current protected, and there will be no

voltage output. It is necessary to disconnect and check the power supply. Then reconnect to restore the charger

function.

- If the headphone is left connected to the charger for a longer period after its batteries are fully charged,

the charging status indicator light may switch off.

TROUBLE SHOOTING

THE CONTROLLER IS NOT CHARGING:

- Make sure the DUAL CHARGE & HEADSET STAND 5™ controller is firmly placed on the charging plug.

- Make sure DUAL CHARGE & HEADSET STAND 5™ is connected to USB power supply.

- Make sure the connected USB power supply is plugged in.

THE HEADSET IS NOT CHARGING:

- Make sure the headset is firmly connected to the charging cable.