Snapmaker A150 Manuale utente
QUICK START GUIDE
MAKE SOMETHING WONDERFUL
Air Purifier
A150 A250 A350
Table of Contents
1 Before You Start
1.1 Disclaimer
1.2 Intended Use
1 . 3 S a f e t y a n d C o m p l i a n c e
1.4 Specifications
1.5 Parts List
1.6 Used Symbols
2 Assembly
3 Using the Air Purifier
3.1 Scenarios
3.2 Connect to Power
3.3 Check the Assembly
3.4 Update Firmware
3.5 Operation
3.6 Read the Status
4 Filter Cartridge Replacement
Resources
1
2
2
2
3
4
5
6
11
12
13
14
15
16
19
20
25
© 2021 Snapmaker. All rights reserved. This language version of the guide is verified by the manufacturer (Original Instruction). No
part of this publication, including pictures, may be reproduced or made public, whether by printing, photocopying, and microfilm or
by any other means whatsoever, without the prior written permission of Snapmaker.
Snapmaker Air Purifier | 1
01Before You Start
Before You Start
2|
1.1 Disclaimer
Ensure anyone who uses this product has read and understood this guide before operation. Failure
to do so is likely to result in personal injury, inferior results, or damage to Snapmaker products, for
which we assume no liability. This guide is for reference use only, and Snapmaker doesn't in any
way make any warranty, express or implied, or assume any legal responsibility for the accuracy,
completeness, or currency of the information provided. We reserve the right to revise this guide at
any time without notice.
Snapmaker shall not be held responsible for any loss, injuries, damage, or expense arising out of or
in connection with the assembly, handling, storage, use, maintenance, or disposal of this product,
as they are beyond our control. When using Snapmaker products, users are responsible for fair use
of intellectual properties and compliance with laws and regulations applicable.
1.2 Intended Use
The Snapmaker Air Purifier catches, traps, and cleans the suspended particles and fumes, and
is intended to deliver clean air in machining. Users should follow the guidelines provided in this
guide. Do not use the Air Purifier for purposes other than intended. While we provide information
on using the Air Purifier in three scenarios including laser engraving, 3D printing, and CNC carving,
users are advised to exercise their own further informed judgment in whether to turn on the Air
Purifier.
1.3 Safety and Compliance
• Use this product together with the Enclosure for Snapmaker 2.0.
• Stop using immediately if you notice unusual smells, sounds, flames, or sparks inside or in the
immediate vicinity of this product, the Enclosure, or the machine.
• Stop using the product immediately if its interior and exterior, the hoses, or the connecting cable
is damaged in any way.
• Persons with cardiac pacemakers and cardioverter defibrillators implanted should avoid
prolonged exposure to this product.
• Do not plug in or plug out any cables when the machine is turned on.
• Do not put any liquids, food, metal, or combustibles on this product.
• Do not put any object in the air inlet or outlet.
• Do not expose the product to rain or wet conditions.
• Do not place the product on an unsound or uneven table or workbench. Keep this product upright
Snapmaker Air Purifier | 3
1.4 Specifications
Dimensions
Weight
Clamp Diameter Cable Length65–89 mm 2,000 mm
Air Inlet Diameter Power Cord Length70 mm 2,000 mm
Rated Power Maximum Noise120 W 65 dB
Operating Temperature Rated Current
0℃–35℃ 5 A
Storage Temperature Input Voltage
-4℃–45℃ 100–240 V AC
Rated Voltage 24 V DC
at all times.
• Do not twist, press the connecting cables too much, run them under carpeting or rugs, or put
them near a heat source.
• Do not attempt to service this product yourself.
• Keep children and pets away from the product.
240 (W) × 240 (Depth) × 420 (H) mm
75 (Diameter) × 2,000 (L) mm
191 (W) × 229 (Depth) × 308 (H) mm
Air Purifier Unit
Hose
Filter Cartridge
Air Purifier Unit
Filter Cartridge
8.5 kg (excluding the hose and hose clamps)
2.4 kg
Note: Different from the Enclosure, the Air Purifier is for all three models of Snapmaker 2.0. As such, even if this
guide uses Snapmaker 2.0 A350 and the A350 Enclosure for illustration, the content applies to the other two
models.
Before You Start
4|
1.5 Parts List
Air Purifier × 1
Hose × 1
Connecting Cable × 1
Quick Start Guide × 1
Cover × 1 Filter Cartridge × 1
Power Adapter × 1
Hose Clamp × 2
Snapmaker Air Purifier | 5
1.6 Used Symbols
Failure to follow this instruction might result in severe personal injury.
Failure to follow this instruction might result in malfunction, damage
to the machine or workpiece, or slight personal injury.
Tells you practical advice.
Ensure the highlighted part is facing the right way.
Warning
Caution
Tip
Direction
Assembly
6|
02 Assembly
Snapmaker Air Purifier | 7
Make sure you have read the Quick Start Guides for the machine and the Enclosure. For the latest
versions, visit our website: https://snapmaker.com/product/snapmaker-2/downloads.
Do not turn on the machine.
QUICK START GUIDE
MAKE SOMETHING WONDERFUL
| A350
A250 / A350
Make Something Wonderful
QUICK START GUIDE
| Enclosure
Altri manuali per A150
4
Questo manuale è adatto per i seguenti modelli
2
Indice
