AS-23-33 2019.06
3
General
Description
The light and compact des0ign allows easy transportation and op-
eration in a very small space.
A single motor powers these models assuring stable operation
even if the voltage drops.
Strap widths to 6-15.5 mm can be easily adjusted by loosening
only two screws. Different strap guides are available to allow use
of 6-15.5 mm strap widths.
The cams, feeding and tensioning systems are designed to elimi-
nate strap splitting, bending and scratching.
The narrow sealing head allows strapping of irregular and cylin-
drical goods.
Automatic re-feeding of the strap. The operator needs only to
place the strap around the goods and insert into the slot. No train-
ing is required.
These models require only the most basic maintenance. Electrical
and mechanical components are designed for easy replacement.
Safety rules
ELECTRIC SHOCK
MECHANISM HAZARDOUS
HIGH TEMPERATURE
It is prohibited for unauthorized persons to use the machine!
Observe all safety precautions and warnings signs.
Do not remove or override any safeguards.
Do not clean the machine or try to affect repairs while it is in operationmain switch to off!
Do not touch the welding element tongue if the machine has been switched on (operating tempera-
ture exceeds 280C).
After performing adjustment, machine sure to reinstall the cover panels.
In case of fire it is strictly prohibited to use water for the extinction.
Never put any heavy article on power cord which could cause fire or electric shock.
Follow the instructions provided in this manual.
Attention:
Before removing any enclosures for maintenance or service always pull out the power plug.
