SodaMagic Smart Manuale utente
1
SodaMagic 'Smart'
Sparkling Water Machine
Instruction Manual
ENG
SodaMagic
2
Contact
SodaMagic
Room D, 7/F
Hollywood Centre
77-91 Queen's Road West
Sheung Wan
Hong Kong
Tel: (+852) 3727 9251
Fax: (+852) 2111 2464
E-mail: contact@sodamagic.hk
www.SodaMagic.hk
3
Content
Parts and Features
4
Install the CO2 Cylinder
5
How to Use
6
Care and Cleaning
9
Troubleshooting
11
Important Safeguards
12
Guarantee and Registration
13
4
Parts and Features
Thank you for using our product. To properly
understand how to use this product, please read
this instruction manual before use.
What your SodaMagic 'Smart' can do
The SodaMagic 'Smart' combines innovative
product design with the latest technology to deliver
one of the world's best compact soda makers.
Carbonate your tap water Before the first use
With the SodaMagic 'Smart' you can make
carbonated water, personalized to your taste, in the
comfort of your home.
Hand wash the water bottle in warm soapy water
and rinse. Wipe outside with a soft cloth to dry.
Never wash the water bottle in dishwasher. Harsh
chemicals will damage the water bottle.
The SodaMagic 'Smart' kit
Fizz Infuser
PET Water Bottle Sparkling Water Machine CO2 Cylinder
Scope of Delivery:
The quantity and design of the accessories may differ depending on the Special Offer being promoted.
5
Install the CO2 Cylinder
Note:
Only use SodaMagic CO2 cylinder and water
bottles. Never carbonate if the water bottle is
empty, not completely filled or not fully inserted.
1) 2)
Remove the back cover.
Remove seal and twist off the cap
from the CO2 cylinder.
3) 4)
To install the CO2 cylinder, place a kitchen towel or
soft cloth on the countertop to protect from
scratching.
Insert threaded part of the CO2 cylinder into the
unit receptacle and hand-tighten.
Put back the back cover.
6
How to Use
1) 2)
Remove the Fizz Infuser and the water bottle
by pulling the water bottle forward and then sliding it off the unit.
3) 4)
Remove the Fizz Infuser from the water bottle by
turning it counter-clockwise and then pulling it up.
Fill water bottle with VERY COLD water to the
MAX fill line.
Only use pulpless beverages like alcohols and
pulp free juices.
WARNING! Pulped beverages may clog the
pressure release valve.
7
How to Use
5) 6)
Attach the Fizz Infuser onto the water bottle and turn clockwise
and slide the Fizz Infuser fully into the unit adapter and tilt the water bottle to a straight vertical position.
7) 8)
Press carbonating button to begin carbonation.
Push 2-3 times the carbonating button then stop
when you hear a hissing sound.
Carbonation can be made stronger or lighter by
pressing for more or less time.
Remove the Fizz Infuser and the water bottle
by pulling the water bottle forward and then sliding
it off the unit.
8
How to Use
9) 10)
Remove the Fizz Infuser and the water bottle
by pulling the water bottle forward and then sliding
it off the unit.
Open the slow release valve on the Fizz Infuser
and pay attention to foam levels as pressure
releases. If the foam reaches the top of the bottle
close the slow release valve and wait for the foam
to settle before opening again. If the foam reaches
the top too quickly next time shorten your
carbonation pushes.
11) 12)
If the slow release valve is open and the sound of
air coming out stops, press the blue fast release
button to make sure pressure is fully released.
Remove the Fizz Infuser by unscrewing it counter-
clockwise.
13)
Enjoy your sparkling beverage!
Cap and refrigerate the water bottle to preserve the
carbonation of the water.
9
Care and Cleaning
•Rinse the water bottle with clean water
after each use.
•The water bottle should not be cleaned in
the dishwasher.
•The water temperature shall not be higher
than +40° C (+120° F). Use mild detergent
only.
•Clean the water bottle carefully and
periodically.
•If you do not intend to use the water bottle
any time soon, leave the water bottle open,
letting the inside dry out completely.
To clean the carbonating unit, wipe with a damp
cloth. Do not immerse the carbonating unit in water.
Do not use any solvents or abrasive cleaners, since
this could damage the surface.
Make sure to wash Fizz Infuser after each use
under running water. The Fizz Infuser allows you
to carbonate non-water beverages because it can
both slowly release pressure and can be easily
cleaned. This is especially important if foam came
out of the valve during use.
10
Care and Cleaning
WARNING!!!
Damaged water bottles can fail during carbonation.
Hand wash with soap and warm water. Never place
the water bottle in dishwasher. Never use brushes,
abrasives, or chemical cleaners. Replace water
bottle if it is scratched, deformed or beyond the
expiration date.
Tips for best results
Use the coldest water possible.
Indice
Altri manuali SodaMagic Produttore di soda
