Soho FSD-800 Manuale utente
FSD-8080 User's Manual i
SOHOConnect Series
FSD-800
8-port 10/100Mbps Ethernet Switch
SOHOConnect Series
Trademarks
Copyright PLANET Technology Corp. 2000.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective
owners.
Contents subject to revision without prior notice.
FCC Warning
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the user’s
manual, may cause interference in which case user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
Revision
The information in this manual is subject to change without
notice. User's manual for PLANET SOHOConnect Series
Switch
Model: FSD-800
Rev: 1.0 (July. 2000)
Part No. EM-FSD800
FSD-800 User's Manual 1
Table of Contents
CHAPTER 1............................................................................1
GENERAL INTRODUCTION......................................................1
Checklist............................................................................1
Introduction.......................................................................1
Features ............................................................................3
CHAPTER 2............................................................................5
HARDWARE DESCRIPTION......................................................5
Front Panel.......................................................................5
Rear Panel ........................................................................6
Hardware Installation.......................................................7
Configuration....................................................................8
Switch Operation.............................................................10
CHAPTER 3..........................................................................15
TROUBLESHOOTING .............................................................15
APPENDIX A........................................................................17
SPECIFICATIONS:..................................................................17
SOHOConnect Series2
This page is intentionally left blank.
FSD-800 User's Manual 1
Chapter 1
General Introduction
Checklist
Check the contents of your package for following parts:
♦The Fast Ethernet Switch
♦Power Cord
♦User’s Manual
If any of these pieces are missing or damaged, please contact
your dealer immediately, if possible, retain the carton including
the original packing material, and use them against to repack the
product in case there is a need to return it to us for repair.
Introduction
The FSD-800, 8-port 10/100Mbsp Ethernet Switch is designed to
allow simultaneous transmission of multiple packets via an
internal high-speed data channel. This means that it can partition
SOHOConnect Series2
a network more efficiently than bridges or routers in most
environments.
In the following sections, the term “Switch”will represent
Planet’s FSD-800, and “switch”for third part Ethernet switches.
This Switch is a highly reliable network switch and is the ideal
device for bridging Ethernet to Fast Ethernet workgroups or
networks. Simple and cost-effective, the Switch complies with
IEEE802.3u, IEEE802.3, 100Base-TX, and 10Base-T. Therefore,
the Switch will be the fast being recognized as one of the most
important building blocks for today networking technology.
Compact in size and designed for Plug and Play installation, the
Switch allows the network administrator to simply connect the
network and power cables and the switching/bridging functions
begin automatically. No hardware or software configurations are
required.
The front panel of the Switch provides LED indicators for easy
recognition of the switch operation status and for troubleshooting.
These LED indicators display the power status for the system and
link, speed, full duplex, and receive status for each port.
With 8-port Fast Ethernet Switching designed specifically for
FSD-800 User's Manual 3
connecting workgroup devices and desktops, companies no
longer have to invest in expensive and inflexible switches
engineered primarily for backbone implementations. Instead,
companies can deploy scaleable, affordable switches that increase
the aggregate bandwidth of the network by boosting throughput
to the workgroups that need it most.
Features
♦8-port 10/100base-TX Auto-Negotiation Ethernet Switching
Hub
♦Complies with the IEEE802.3 Ethernet and IEEE802.3u Fast
Ethernet standard
♦Features Store-and-Forward architectures with wire-speed
filtering and forwarding rates
♦Full/Half-Duplex capability on every TX ports, total
bandwidth is up to 200Mbps/port
♦Support up to 4K Uni-cast address, Layer 2 address resolution-Self
Learning
♦Broadcast storm control
♦IEEE802.3x compliant full-duplex flow control
♦Half-duplex flow control
♦100~240VAC Full range internal power supply
SOHOConnect Series4
♦LED indicators for simple diagnostics and management
♦Port#8 provides an extra port for MDI and MDI-X mode PC
or hub Uplink.
♦Plug and Play
Chapter 2
Hardware Description
This section describes the hardware features of the Switch. For
easier management and control of the Switch, familiarize
yourself with its display indicators, and ports. Front panel
illustrations in this chapter display the unit LED indicators.
Before connecting any network device to the hub, read this
chapter carefully.
Front Panel
The unit front panel provides a simple interface monitoring the
Switch. It includes a power indicator for each port.
Figure 1. Front Panel of FSD-800
SOHOConnect Series6
LED indicators
LED
Function Color Description
Power
(PWR) Green This indicator lights green when the hub is
receiving power, otherwise, it is off.
Link/ Act Green This indicator green when the port is
connected to a either 10Mbps Ethernet or
100Mbs Fast Ethernet station , If the station
to which the hub is connected is powered
off, or if there is a problem with the link, the
LED will remain off.
And the indicator blinking green when the
data will be received to all other connected
ports.
100 Green This indicator green when the port is
connected to a 100Mbps Fast Ethernet
station. If the station to which the hub is
connected is powered off, a 10Mbps
Ethernet station, or if there is a problem with
the link, the LED will remain off.
FDX/COL Green Lit: Full duplex operation
Unlit: Half duplex operation
Blink: indicates data collisions on the
respective Ethernet segment of this port.
Whenever a collision is detected, the
respective COL indicator will briefly blink
Rear Panel
The rear panel of the Switch indicates an AC-jack power socket,
which accepts 100~240VAC Power inlet for FSD-800.
Indice
Altri manuali Soho Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza