Solem LR-IS-FL Manuale utente
THE CONNECTED IRRIGATION EXPERT
LR-IS-FL
QUICK
INSTALLATION
GUIDE
2
PRESENTATION
DOWNLOADING
1. On your smartphone and/or tablet, go to «App Store» ou «Google Play».
2. Search «MySOLEM» in the search bar.
Step 1
3. Download MySOLEM applicaon.
MySOLEM
GET INSTALL
4. Once installed, acvate the Bluetooth®on your smartphone and/ or tablet.
The LR-IS-FL is a Bluetooth®/ LoRaTM mains water mer, remotely controllable
from 2, 4, 6, 9 or 12 staons. Its probe input allows the connecon to a rain
sensor or a ow meter / water meter.
The LR-IS-FL requires the associaon with a LR-MB (relay WiFi/LoRa)
or an LR-BST. (However it can be used in bluetooth)
CREATE UN ACCOUNT
To benet from all LR-IS-FL features, please create a MySOLEM account.
1. Launch MySOLEM app from your smartphone and/or tablet.
2. Go to «My account» by typing on icon.
3. Follow the steps described on the app.
3
PAIRING
1. Remove the lower hatch to let appear the terminal.
3. Launch the MySOLEM app.
Step 2
2. Connect the 220/24 Vac power supply and replace the hatch.
5. Choose the LR-IS-FL from the list of nearby controllers.
7. To nish the pairing of your LR-IS-FL, follow the next steps described
in the app.
6. (Oponal) Dene a name and a security key for your controller and click
on the buon «Validate».
Note : To idenfy your LR-IS-FL among the nearby controllers, please refer
to the «Default name» present on his product label.
4. Tap on the «Add a module» buton or the «+» buton .
Security key
The security key allows to protect your controller. You can dene it during the
step 6 of the «ASSOCIATION» or access to further informaon by clicking on
the icon at the top right of your screen..
4
LR-MB PAIRING
Step 3
Note :
- The message «Connecon established» means that the connecon is
reliable.
- The message «No connecon established» means that it is necessary to
bring the LR-IS-FL closer to the LR-MB or vice versa.
To opmize the LoRaTM radio connecon between the LR-MB and the LR-IS-FL
controllers, we advise to install the LR-IS-FL in a plasc valve box under 800
meters to the LR-MB. We also advise to associate all your LR-IS-FL near the
LR-MB before installing them separately in the valve boxes.
2. Click on the top right icon to access to the product’s informaons.
4. Select the LR-MB you want to use.
7. Click on the buon to start the test.
3. Click on «Remote Access».
6. Go back to «Remote access» screen.
1. Select the LR-IS-FL programmer previously installed.
5. Click on the buon «Send» or on the boom of your screen to validate.
Once the pairing nished, you can test the connecon between
your LR-MB and your LR-IS-FL :
5
Connect the LR-IS-FL to the solenoids as described below.
Use 24V valves only.
LR-BST PAIRING
WIRING
Step 4
24V - S+ C C P 1 2 3 4 5 6 7 8 9 101112C
24V
1. On the applicaon, select your LR-BST, and enter pairing mode .
3. Tap the icon at the top right of your screen to access product’s infor-
maon.
4. Tap on «Accés à distance».
2. Select the LR-IS-FL programmer previously installed.
5. Select in the list the LR-BST inially chosen.
7. Click on the buon to start the test.
6. Return to the LR-IS-FL screen «Remote Access», previously seen.
Once the associaon is complete, you can test the connecon between your
LR-BST and your LR-IS-FL
6
Step 5
SET SENSOR
The LR-IS-FL has a -S+sensor input on which you can connect a rain sensor
or a pulse sensor / water meter aer cung the blue wire. Once the sensor is
connected, it is necessary to congure it in the applicaon.
2. Click on Add Sensor.
1. Using the MySOLEM mobile app, connect to your LR-IS-FL.
3. Select your sensor type and follow the instrucons given by the applicaon
Step 6
SET FLOWMETER
1. Check the «Instant Value».
Instant Value: Ensures that the volume consumed indicated on the water
meter is the same as the volume displayed on the applicaon. If a gap is
noted, check the wiring (polarity) or adjust the «COEFFICIENT» value.
High threshold (daily volume): maximum consumpon (in liter) that you
do not want to exceed in a period of 24h. If the goal is exceeded you will be
alerted immediately (by e-mail and nocaon smartphone and / or tablet).
Low threshold (daily volume): minimum consumpon (in liters) that you
want to achieve over a period of 24h. If the goal is not reached you will be
alerted the next day at 7am (by e-mail and nocaon smartphone and / or
tablet).
Leak alert volume: water volume threshold (in liter) from which you want to
be alerted.
2. Fill in the remaining elds.
Warning, by default there are no sensor congured.
7
Staon ow: for each staon, read the owmeter at me T (Cpt1), then at
me T + 5mn (Cpt2).
Make the calculaon (Cpt2 - Cpt1) / 5 => Flow (L / min)
In the applicaon ll in the results.
High Threshold (Staon Flow Alerts): Maximum consumpon warning
threshold in % of the calibrated ow of the channel. The «High threshold»
alert is immediate as soon as it is reached.
Low threshold (Staon Flow Alerts): Minimum consumpon warning
threshold in % of the calibrated ow of the channel. The «High threshold»
alert is immediate as soon as it is reached. For each staon ow alert you have
the possibility to dene the desired type of acon:
• No acon: watering connues.
• Permanent OFF: resuming watering requires a manual ON command (in
the applicaon on the programmer concerned).
• Inhibit the output: stops the staon concerned, requires the
acknowledgment of the alert (in the applicaon on the programmer
concerned) to reacvate the staon.
Stabilizaon me:
Time required before the water ow is stable when starng and stopping the
staon. It eliminates the peak ow (start) or leak (stop). The me is the same
for all staons.
During this period, the consumpon is not taken into account for triggering
alerts or acons.
8
24V - S+ C C P 1 2 3 4 5 6 7 8 9 101112C
24V
Flowmeter,
water meter
L/mn
Connect your + S - input to a water meter equipped with a ow sensor as
shown above. Use dry contact ow sensors or equivalent.
For polarized ow sensors, when wiring,observe the polarizaon :
Red wire -> + Black wire - > -
9
INFORMATION ON THE STATUS OF THE LED
Green LED : normal operaon
Blinking green LED : One channel is in progress (the ashing number
corresponds to the staon number acvated).
Green LED and Red Flashing : One channel is in progress and the rain sensor
is acvated or a staon is in progress and the product is in permanent OFF or
several days.
LED Red Fixed : the product is in inializaon mode
LED Red Flashing 2 mes : The programmer has lost me, reconnect to re-
synchronize.
LED Red Flashing 4 mes : One of the staons has a short circuit or is
overconsumpon. The other reason is that you probably have powered down
2 mes in a short me while a staon is sll in progress.
LED Red Flashing 5 mes : You have exceeded the me required to inialize
the mer. Repeat the inializaon procedure.
LED O : The product is not powered.
10
FAQ
What are the features required for the Bluetooth® product to work?
Android 4.3 (or more) Smartphones or tablets equipped with Bluetooth Smart
4.0 (or more). iOS 9.0 Apple iPhone or iPad running (or more) with Bluetooth
Smart 4.0 (or more)
Why does my staon not start?
It has to be assigned a me and a Program A, B or C to each staon. If several
staons are assigned to the same program, they will start one aer the other.
Why does Program B not start? If Program A departure me is the same than
Program B’s one, then the programs will be executed one aer the other.
What is output P for?
You can connect a master valve or a pump through a relay, on Poutput. It will
start automacally 2 sec before each staon and during each staon watering.
What are the controller’s output S (blue wire) for? You can plug a rain sensor
into Soutputs, to do that you need to cut the blue wire.
How does the rain sensor work? When connected to the yellow wire the rain
sensor acts on the 3 programs. If it is raining, programs A, B and C won’t start;
you must wait the probe to dry before the programs star again. The manual
control “All staons” is not aected by the rain sensor condions.
What is the Water Budget? The Water Budget allows to add a me percentage,
according to the me recorded by each staon. It is generally used during
seasonal changes (for example: summer to autumn, or spring to summer).
E.g.: If you entered Staon 1 = 1h on Program A and Staon 2 = 0h30 on
Program A. Then, if you enter a Water Budget for Program A at 120%, when
starng Program A, staons 1and 2will be increased by 20%, which means
1h12 for Staon 1 and 0h36 for Staon 2.
How can I restart the pairing or the pairing procedure?
To start the pairing procedure again, just bypass the 2 pins of the baery
pressure (baery prior removed) for 30s minimum.
Indice
Altri manuali Solem Timer
