Soleus Air ICongo PSQ-08-01 Manuale utente

V16

Model No.: PSQ-08-01

PSQ-10-01

PSQ-12-01 

8,000/10,000/12,000 BTU

Portable Air Conditioner

Operating Instructions

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide

you with valuable information necessary for the proper care and maintenance of your new product.

Please take a few moments to thoroughly read the instructions and familiarize yourself with all the

operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the

store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: _____________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet

grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by

the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) Do not mix old and new batteries in the remote control.

Do not mix Alkaline, Standard (Carbon - Zinc) or Rechargeable (Nickel - Cadmium) Batteries.

PACKAGE CONTENTS

SPECIFICATIONS

x The cooling capacity is measured at an ambient temperature of DB 95˚F, WB 83 ˚F.

x Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cool-

ing mode.

x Power consumption is measured when the fan runs at the highest speed setting.

x These specifications are for reference only. For actual data, please refer to the rating label on the back

of the unit.

x If the environment temperature is higher than the max operating temperature or lower than the minimum operat-

ing temperature, the air conditioner may not work properly.

MODEL NUMBER PSQ-08-01 PSQ-12-01PSQ-10-01

COOLING CAPACITY 8,000 BTU/Hr 12,000 BTU/Hr1,000 BTU/Hr

DEHUMIDIFYING CAPACITY 86 pts/Day 6 pts/Day6 pts/Day

COOLING POWER USAGE 1030 Watts, 8.9 Amps 150 Watts, 1 Amps1250 Watts, 11.2 Amps

AIR FLOW VOLUME 206 CFM 206 CFM206 CFM

POWER SOURCE 115 V / 60 HZ 115 V / 60 HZ115 V / 60 HZ

NOISE LEVEL ≤58 dB(A) ≤58 dB(A)≤58 dB(A)

PRODUCT WEIGHT 61.7 Lbs 61.7 Lbs61.7 Lbs

OPERATING

TEMPERATURE 63-88 63-8863-88

PRODUCT DIMENSIONS 12.25” Wh21.25” Dh

25” H

12.25” Wh21.25” Dh

25” H

12.25” Wh21.25” Dh

25” H

REFRIGERANT R-410A R-410AR-410A

Portable Air Conditioner (1)

Exhaust Hose (1)

Window Kit Adapter (1)

Rubber Plug (2)

Screw (1)

Remote Control (1)

AAA Batteries (2)

Window Kit - Sliding Panels (2)

Owner’s Manual (1)

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to re

risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded 

must be considered a shock hazards if exposed. The cord shield must not be connected to ground 

any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button 



If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the

air conditioner or attempt to reset the LCDI Plug. Contact Soleus for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as ĀONāand ĀOFFāswitches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.







19 20

MIN

HOUR

TIMER

FANSPEED

MODE

SWING

HOLD

PRODUCT DIAGRAM

1. Adjustable Louver

2. Cold Air Outlet

3. Air Outlet Cover

4. Air Exhaust Cover

5. Hot Air Exhaust Opening

6. Cold Air Filter

7. Continuous Drain Port

8. Cold Air Intake

9. Hot Air Filter

10. Hot Air Intake

11. Condensation Drain Hole

12. Casters

13. Exhaust Hose

14. Screw

15. Window Kit

16. Remote Control

17. AAA Batteries

18. Window Kit Adapter

19. Continuous Drain Rubber Plug

20. Condensation Drain Rubber Plug

PARTS & ASSEMBLY

PARTS

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit draws in indoor air and exhausts hot air out

of the room to complete the air exchange. When the unit is operating in fan mode no outdoor air exchange takes

place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 4. ft. long

(approximate length).

Screw

Panel A

Panel B

Exhaust Hose Window Kit Adapter



WINDOW KIT INSTALLATION

FOR SINGLE HOSE AIR CONDITIONER

The venting kit must be installed in order for the unit to work correctly in the air conditioner mode dehumid mode.

The venting kit should not be used while the unit is fanning.

The window kit has been designed to fit into most vertical and horizontal window openings.

Close the window tightly. Your portable air condi-

tioner is good to go.

Open the window or door to adjust the length of the window kit to

fit the opening. If necessary, mark the kit and cut one end down to

properly fit he opening.

Note: Use the least amount of Exhaust Hose length as possible to

maximize efficiency.

Note: The unit above may differ from the unit described in the manual, the

above directions and images show general directions for Soleus Air single

hose Portable Air Conditioner.

Connect the Exhaust Hose

over the hot air exhaust

opening

Exhaust Hose

This side up

Window Kit Adapter

Exhaust Host

Window Kit Attach the Exhaust Hose to the

Window Kit Adapter, attach the

Window Kit Adpater to the

Window Kit.

Exhaust Hose

Note: When using the venting system, keep the Exhaust Hose as straight

as possible. The Exhaust Hose can be shortened, but it is not recom-

mended to increase the length of the Exhaust Hose. DO NOT use an ex-

tension cord with your portable air conditioner.

Exhaust Hose

Air Exhaust Cover

Press the recessed points on

each side of the Air Exhaust

Cover and remove the

Exhaust Hose horizontally.

WINDOW KIT ASSEMBLY GUIDE

2. Assembly:

Slide Panel B into Panel A and size to window width. Windows

sizes vary. When sizing the window width, be sure that the win-

dow kit assembly is free from gaps and/or air pockets when taking

measurements.

3. Lock the screw into the holes that correspond with the width

that your window requires to ensure that there are no gaps or air

pockets in the window kit assembly after installation.

1Parts

-Panel A: with exhaust hose opening

-Panel B

-Screw to lock window kit in place

Panel A

Screw

Panel with

Exhaust Opening

Panel B



CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER but-

ton once more to turn the unit off.

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

TIMER

SPEED

MODE

POWER

TEMPERATURE

COOL

BUCKET FULL

FAN

DRY

HIGH

MEDIUM

LOW

Bucket Full

Indicator

Mode Selection

Button

Increase

Temperature/Timer

Button

Signal Receiver

POWER

ON/OFF

Button

Fan Speed

Button

Air Conditioner

Mode

Indicator

Dehumidifier

Mode

Indicator

Fan Speed

Indicators

Fan

Mode

Indicator

Timer

Button

Decrease

Temperature/Timer

Button

OPERATING INSTRUCTIONS

CONTROL PANEL

3) Temperature - Select the desired temperature by pressing either ▲ or ▼ key when using the unit in

Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-

ter the desired temperature is set, the temperature indicator will flash 10 seconds before it returns to

current room temperature. The temperature indicator display shows temperature in Fahrenheit.

- This unit has -way directional louvers. Use the louver guides manually to direct

air up and down.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air

Conditioner mode, Dehumidifier (Dry) mode, and Fan only mode. Each press of the MODE button will

light up a different icon on the control panel. The exhaust hose and window kit must be installed when

the unit is in Air Conditioner, and Dehumidifier mode. When using the unit as a fan, it is not necessary

to keep the exhaust hose and window kit connected to the unit.

4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water will

collect in a backup water tank located inside the unit. Once the tank is full, Bucket Full indicator will light

up.

5) Louver Direction

6) TIMER - Press the TIMER button to turn the unit auto-on or auto-off. Set the timer by pressing either ▲

or▼ button.

1

OPERATING THE UNIT

Air Conditioner Mode

1) Install the exhaust hose and window kit properly (see pages 7 & 8).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button.

4) Press the Mode button until the air conditioner mode indicator lights up on the control panel dis-

play.

5) Press the ▲ or ▼ until the desired room temperature appears on the control panel display. The tem-

perature ranges from 63˚F - 88˚F.

6) Select the desired fan speed by pressing the SPEED button on control panel.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the low-

est setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the ex-

haust hose and window kit, and keeping direct sunlight to a minimum will also improve the cool-

ing efficiency.

NOTE: When the unit is running on air conditioning mode, the exhaust hose is required and must be

vented outside using the supplied window kit.

Dehumidifier Mode

1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button.

4) Press the MODE button until the dehumidifier mode indicator lights up on the control panel display.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly dur-

ing the dehumidification process. Keep the windows and doors closed to aid the effectiveness of

the unit in removing the moisture from the room.

NOTE: When the unit is running on dehumidifier mode, the exhaust hose is required and must be

vented outside using the supplied window kit.

Fan Mode

1) Plug the Power Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the fan mode indicator lights up on the control panel display.

4) Select the fan speed by pressing the SPEED button.

NOTE: It is not necessary for the exhaust hose and window kit to be installed to operate the unit in fan

mode.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Soleus Air Condizionatore d'aria

Soleus Air

Soleus Air KFHHP-22 Manuale operativo

Soleus Air

Soleus Air PSR-06-01 Manuale utente

Soleus Air

Soleus Air SG-TTW-10ESE Manuale utente

Soleus Air

Soleus Air MAC-8000 Manuale utente

Soleus Air

Soleus Air HCC-C09HP-A Manuale utente

Soleus Air

Soleus Air KFIHP-09-ID Manuale utente

Soleus Air

Soleus Air KFCHP5-09-ID Manuale utente

Soleus Air

Soleus Air SG-WAC-25ESE-C Manuale utente

Soleus Air

Soleus Air TTWM1-10-01 Manuale utente

Soleus Air

Soleus Air SG-WAC-15ESE-C Manuale utente

Soleus Air

Soleus Air LX-140 Manuale utente

Soleus Air

Soleus Air PE2-08R-62 Manuale utente

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

Soleus Air

Soleus Air KFTHP-9-ID Manuale utente

Soleus Air

Soleus Air HM1-10-32 Manuale utente

Soleus Air

Soleus Air LX-140 Manuale utente

Soleus Air

Soleus Air SE-PAC-08E9 Manuale utente

Soleus Air

Soleus Air SG-PAC-12E1HP Manuale utente

Soleus Air

Soleus Air GM-PAC-10E2 Manuale utente

Soleus Air

Soleus Air KFHIP-09-OD Scheda tecnica

Soleus Air

Soleus Air KFR/KFS Series Manuale utente

Soleus Air

Soleus Air LX-140BL Manuale utente

Soleus Air

Soleus Air KY2-34 Manuale utente

Soleus Air

Soleus Air PH1-14R-03 Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Daikin

Daikin FCFV50A Manuale utente

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Daikin

Daikin FXLQ20MAVE Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

McQuay

McQuay MCK020A Manuale utente

Webasto

Webasto Frigo Top 25 DS Manuale utente

Soleus Air iCongo PSQ-08-01 Manuale utente

Manuali Condizionatore d'aria popolari di altre marche