ET0201-VF1/VF2 User Manual
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
Warranty Policy
SolidView products are warranted against defects in material and workmanship for two years from the
date of shipment. During the warranty period, SolidView will, at its option, repair or replace products
that prove to be defective. Repairs are warranted for the remainder of the original warranty or a 90
day extended warranty, whichever is longer.
For equipment under warranty, the owner is responsible for freight to SolidView and all related
customs, taxes, tariffs, insurance, etc. SolidView is responsible for the freight charges only for return
of the equipment from the factory to the owner. SolidView will return the equipment by the same
method (i.e., Air, Express, Surface) as the equipment was sent to SolidView.
All equipment returned for warranty repair must have a valid RMA number issued prior to return and
be marked clearly on the return packaging. SolidView strongly recommends all equipment be
returned in its original packaging.
SolidView’s obligations under this warranty are limited to repair or replacement of failed parts, and the
return shipment to the buyer of the repaired or replaced parts.
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed, altered, repaired, or
misused in any way that, in the opinion of SolidView, would affect the reliability or detracts from the
performance of any part of the product, or is damaged as the result of use in a way or with equipment
that had not been previously approved by SolidView.
The warranty does not apply to any product or parts thereof where the serial number or the serial
number of any of its parts has been altered, defaced, or removed.
The warranty does not cover damage or loss incurred in transportation of the product.
The warranty does not cover replacement or repair necessitated by loss or damage from any cause
beyond the control of SolidView, such as lightning or other natural and weather related events or
wartime environments.
The warranty does not cover any labor involved in the removal and or reinstallation of warranted
equipment or parts on site, or any labor required to diagnose the necessity for repair or replacement.
The warranty excludes any responsibility by SolidView for incidental or consequential damages
arising from the use of the equipment or products, or for any inability to use them either separate from
or in combination with any other equipment or products.
