Solight FP04WIFI Manuale utente
1EN
78 9
DESCRIPTION
1. MENU button
15
2. Left arrow
3. PLAY button
4. OK button
5. Arrow to the right
6. SHOT button
14
1
4
7. Switch position ON
2
5
8. SETUP switch position
3
6
9. Switch position OFF
10. USB connector
11. Speaker
12. AV connector
13. DC connector
14. SD slot
15. AA batteries
EN FP04WIFI
HD Hunting camera with WIFI
connection
10 11 12 13
2EN
INSERTION OF BATTERIES
Remove the battery compartment cover and insert four 1.5V AA batteries into
the battery compartment. When inserting, make sure to observe the correct
polarity, which is marked on the bottom of the battery compartment. Replace the
cover.
When replacing, first remove the dead batteries and then insert the new ones.
Note
Do not insert a dead battery and a new battery at the same time or
use different types of batteries at the same time. If you will not be
using the hunting camera for a long period of time, remove the
batteries to prevent damage in the event of an electrolyte leak.
Warning
Do not short-circuit or otherwise damage the battery. Never throw
the battery into a fire. Discharge the battery and dispose of it in an
environmentally friendly manner. Do not dispose of batteries in
mixed waste.
INSERTING AN SD CARD
Insert the SD card into the hunting camera before turning it on. Insert the SD
card into the slot. When inserting, make sure to insert the card correctly. The
illustration next to the slot shows how to insert the card correctly. If the SD
card is not inserted correctly, an "X" will appear in the upper corner of the
screen.
3EN
Do not insert or remove the SD card while the hunting camera is in operation.
The hunting camera supports high-speed SD cards class 10 and higher. Format the
SD card before use. Regular use, as well as improper use, will shorten the life of
the SD card and may cause data corruption. If the SD card is damaged, replace it.
USE OF HUNTING CAMERAS
A slide switch is used for basic control of the hunting camera.
OFF position the hunting camera is switched off.
Position ON After the countdown is complete, the hunting camera starts
recording the surroundings in the previous setting.
SETUP position The hunting camera is in system setup mode.
HUNTING CAMERA SETTINGS
Move the slide switch to the SETUP position and press the MENU button. Adjust
the parameters of the hunting camera according to your personal preferences.
Use the left and right arrow keys to move through the settings and change the
parameters.
Press OK to confirm the change. To exit the settings, press the button
MENU.
Note
If you do not press the OK button, the settings you have made will not be
saved.
4EN
Settings item
Option
Description
Camera mode
(Hunting camera Mode)
Photo
Video
Photo + video
Select the hunting camera
mode.
Photo resolution
(Photo resolution)
20 MP (6144 x 3456)
16 MP (5376 x 3024)
12 MP (4608 x 2592)
8 MP (3840 x 2160)
5 MP (3072 x 1728)
3 MP (2304 x 1296)
1 MP (1280 x 720)
The higher the resolution,
the better the quality of the
photo, but the larger the file
and the more space it takes
up in the SD card memory.
Multi-shot
(Snapshot)
1photo
2photos
3photos
The number of photos
taken when the shutter
button is pressed.
Video resolution
(Video resolution)
2.7K / 20 fps
(2688 x 1520P)
1080P / 30 fps
(1920 x 1080P)
720P / 30 fps
(1280. x 720P)
480P / 30 fps
(720 x 480P)
VGA / fps30
(640x 480P)
The higher the resolution,
the better the video quality,
but the larger the file and
the more space it takes up in
the SD card memory.
5EN
Settings item
Option
Description
Video length
(Video length)
From 5 seconds to 3 minutes We recommend setting the
video length to 10 seconds.
The longer the recording
time, the more power is
consumed and the file takes
up more space in the SD
card memory.
Audio recording
(Sound recording)
ON - sound will be recorded
OFF - sound will not be
recorded
The default setting is "ON".
PIR interval
(Interval PIR)
From 5 seconds to 59
minutes
When the shutter button
is pressed, the hunting
camera will not take
photos or recordings for a
set period of time. This
prevents the SD card from
being filled with duplicate
files.
6EN
Settings item
Option
Description
PIR sensor sensitivity
(PIR sensor sensitivity)
Low (low) Medium
(medium) High
(high)
The sensitivity of the
PIR sensor depends on
the ambient
temperature. The "HIGH"
setting is more suitable at
higher temperatures. The
"ME- DIUM/LOW" setting is
suitable for lower
temperatures.
This setting is not available
if you select Time Lapse
mode.
Working timer
(Timer)
ON - on OFF -
off
Select "ON" and the
hunting camera will
operate at a specific
time each day. The
default setting is
"OFF".
7EN
Settings item
Option
Description
Time Lapse
(Time-lapse mode)
ON - on
OFF - off
Select "ON" and the
hunting camera will
automatically take
photos/videos according to
the set interval. This setting
is particularly suitable for
recording cold-blooded
animals (e.g. snakes) or for
recording plant growth.
Note: If you select "ON",
the PIR setting will not be
active.
Language
(Language)
English (English), German
(German), French (French),
Italian (Italian), Spanish
(Spanish), Czech (Czech)
Select your preferred
language.
8EN
Settings item
Option
Description
Time & Date
(Hours and date)
1. Set the clock and
date.
2. Set the clock format.
3. Set the data format.
1. Setting the clock: use the
left/right arrow keys to
set the clock and date.
2. Clock format: select 24-
hour or 12-hour format.
3. Data format: select
your preferred data
format.
Photo stamp
(Time stamp)
1. Time&Date (Clock &
Date)
2. Date.
3. OFF - no time
stamp.
1. Select "Time&Date"
(clock and date) and the
moon phase, humidity,
temperature, °F, date,
hour of origin, serial
number, etc. will be
displayed.
2. Select "Date" and the
clock will not be
displayed.
3. Select OFF and no time
stamp will appear.
9EN
Settings item
Option
Description
Password
(Password)
ON - password must be
set
OFF - settings will be
without password
You can set a 4-digit input
password of the digits 0-9
and the letters A-Z to
prevent unwanted access to
the hunting camera
settings.
If you forget the password,
make sure the hunting
camera is switched off and
press the left arrow at the
same time.
and the PLAY button. Then
slide the switch to the SETUP
position and the hunting
camera will be unlocked.
Beep sound (Button
sound)
ON - on
OFF - off
The default setting is "ON".
Selecting "OFF" will turn off
the soundtrack for the
buttons.
10 EN
Settings item
Option
Description
Format memory card Yes - yes, the memory card
will be formatted. No - no
Formatting will delete all files
on the tab.
Note: Before using the SD
card for the first time,
format it.
Camera ID
(Hunting camera
identification)
ON - on OFF -
off
Set the 4-digit photocell
identification code from the
digits 0-9 and the letters A-Z.
Once set, photos/videos will
display the hunting camera
identification code.
Reset setting
(Factory reset)
Yes (Yes)
No (No)
Select "Yes" and the
settings will be restored
from the factory. All
settings you have made
will be erased.
Auto WIFI Off 1minute
2minutes
3minutes
The Wi-Fi will
automatically disconnect
and switch off if it has not
been paired with the
hunting camera within
the set time.
Indice
Altri manuali Solight Macchina fotografica digitale
