SOLO-E SOLO7 Manuale utente
7
USER
MANUAL
Using This Manual
This manual contains important instructions for the safe use and
operation of the scooter.
Please fully read the manual before using the scooter.
Package Contents
1x Scooter quality checklist
1x SOLO7 electric scooter
1x SOLO7 charger
1x Handle bar
5x Screws
1x Tool kit:
- 5x Allen keys
- 1x Flat/Phillips screwdriver
- 2x Spanners
1x Safety manual
7
Disclaimer
At present, electric scooters are not to be used on public roads, footpaths and cycle
lanes in the United Kingdom. It is the complete responsibility of the owner to ensure
that you operate your electric e-scooter within all DFT guidelines.
The owner assumes all liability and risk associated with the use of electric scooter
products and holds SOLO-E Ltd and its owners free from any liability or injury caused by
their use.
7
Specifications
* Note - Actual ranges achieved will vary based on factors including riding style, rider weight, environment and road surface.
The SOLO7 will soon feature upgradable accessories and colour styles - For further information please contact your
authorised dealer
Description
Black
1340x520x1200mm
1250x200x580mm
100kg
3
≤20km/h
40km-50km *
≤15°
18650 Li-ion
36V
250W
10.4Ah
Front & rear disc brakes
LED front light
12” front & rear inflatable tyres
Brushless motor
7
Specification
Top speed
Speed modes
Accelerator type
Range
Brake type
Lights
Motor
Battery
Weight limit
Tyres
Puncture sealant
Weight
Water resistance
Suspension
Description
25kmh / 15.5mph
3 - Low, Normal, High
Thumb Controlled
Up to 50km / 31miles *
Front and Rear dDsc
Front and Rear Brake
250 Watts (geared)
36V 10.4Ah (removable)
150kg / 23.6 stone
Front and Rear 12” Pneumatic
Standard
20.5kg
IP54 Frame; IP67 Electrics
Front and Rear
Description
Black
1340x520x1200mm
1250x200x580mm
100kg
3
≤20km/h
40km-50km *
≤15°
18650 Li-ion
36V
250W
10.4Ah
Front & rear disc brakes
LED front light
12” front & rear inflatable tyres
Brushless motor
SOLO7 Overview
Left brake
Indicator
switch
Light switch
Horn
Front light
Reflector
Front wheel
Front
disc brake
Kickstand
Right brake
Throttle
Anti-slip
deck surface
Folding
buckle
Battery
indicator
Right
indicator
Rear wheel
Reflector
Front fork
Charging
port
Left
indicator
Rear light
Battery
lock
Rear disc
brake
LCD
display
7
Bluetooth
(active when lit)
LCD Dashboard
Speed Modes
Speed
Battery
charge
Speed unit
(km/h when lit,
mph when unlit)
Light
Speed
mode
The scooter’s current speed mode is indicated by the speed mode symbol:
No symbol = Low speed mode
White symbol = Normal speed mode
Red symbol = High speed mode
7
Dashboard
On scooter models without turn signals; the
dashboard features one button at the bottom of
the display; press this to turn the scooter on and
off.
On scooter models with turn signals, the power
button is positioned on the left handlebar (see
later in the manual).
7
Assembly & Unfolding the Scooter
Step 1 - Open the packaging and carefully
remove the scooter and contents.
Step 2 - Pull the steering column up to
unfold the scooter.
Step 3 - Lift the locking buckle (1) up and
press this into position, then lift locking
buckle (2) onto buckle (1).
7
Step 4 - Check both locking buckles are
fully secured and the steering column is
not loose.
Assembly - Unfolding the Scooter
Step 5 - Fix the handle bars onto the
steering column, using the supplied screws
and tools.
Step 6 - Check that the handle bar is fully
tightened onto the steering column.
7
Load Rack
The scooter comes with the load rack
preinstalled to the rear above the battery
pack.
The rack can be eaily removed if not
needed, or access to the battery pack is
requried, by unscrewing the top four
screws.
Collapsing The Scooter
7
Step 2 - Push the steering column down
towards the rear wheel of the scooter.
Step 1 - Unclip and push down locking
buckle (2), then repeat with locking buckle
(1).
Indice
