Soloshot Soloshot3 Manuale utente

Quick Start 2-5

Track Settings 6-7

Camera Settings 8-9

Multi-Mode 10

Time Lapse 11

Interim User Manual

Conﬁdential: For Internal Use Only

QUICK START

1. Setup Tripod

a]Connect Base to Tripod

b]Click Camera into place

Don’t forget to remove lens

cap before powering on.

Ensure Base securely

connected to Tripod

using provided tool.

Ensure Base is level. There is a small level-

ing bubble on the Tripod that will help.

Avoid setup under powerlines, in dense

Urban environments or under trees or

building overhangs. An unobstructed view

of the sky for both Tag and Base will ensure

best performance.

2. Power On

a]Power on Tag

b]Power on Base

3. Launch Track App

PRO TIPS

4. Sync Tag to Base

a]Ensure Tag has GPS lock

Typically takes a minute

or two.

c]Dock Tag into front of Base,

leave docked for 5-seconds,

then remove.

You won’t have to do this

again as your Base will

remember this Tag.

BEFORE GPS LOCK AFTER GPS LOCK

b]Select TAG MANAGER

4a 4a

d]Toggle TRACKING ON for your

Tag

e]Exit TAG MANAGER and return

to TRACK APP

4c 4c

5. Start Calibration

a]Press the START/SETTINGS

button

b]Press START

Successful Auto-Calibration

The Base will spin for one-minute

as it calibrates, and then snap to the

subject.

Auto-Calibration fails

It’s possible that auto-calibration

fails due to external GPS interference

in your ﬁlming environment. In this

case, proceed to the Base and follow

the prompts on the touchscreen to

complete the manual calibration.

Defaults settings

Tracking Settings TILT ON

Field of View (FOV) Medium

Framing Center

Camera Settings 1080p60

PRO TIP

After a successful calibration, move laterally and/or circle around the Base a few

times, at about 20-30 feet to ensure that the Camera’s smart tracking technology

has locked onto you.

6. Record On / Off

a]From the TAG, press and hold

the (+) BUTTON to toggle

record on/off.

b]The Base will also reﬂect that

recording is on.

Record ON Record OFF

6a 6a

PRO TIP

You can also pause tracking from the Tag by double-

tapping the (+) BUTTON

PRO TIP

To PAUSE TRACKING and STOP

RECORD from the Base while you’rve

ﬁlming, simply exit out of the TRACK

APP and return to the Homescreen.

Tracking ON Tracking OFF

c]To PAUSE TRACKING from

Base while you’re ﬁlming, follow

these steps:

1] Press the START SETTINGS

2] Select PAUSE

3] The Base will indicate that

tracking is paused, but

record is still on.

4] To resume tracking, press

START/SETTINGS again, and

then RESUME.

c1 c2

TRACKING

1. Track Settings

a]Enter the Track App and press

START/SETTINGS BUTTON.

b]Select Tracking Settings.

c]Adjust the settings depending

on your needs. Here is a list

with the recommended settings

that should cover most

activities.

Field of View: Medium or tight

Framing: Center or bottom

middle

Trajectory: 3-secs

No need to adjust this

Tilt Mode

For use when ﬁlming

activities with lots of vertical

movement such as snowboard

ing, paragliding and RC ﬂying.

This relies on auto-calibration

meaning no manual input is

required by the user.

Surf + Turf

For most use cases when

tracking a Tag on a level

surface such as team sports

or surﬁng. Basic manual input

is required by the user in the

form of 2 button presses.

Off

For use when locking tilt and

zoom is desired. Select this

mode and then use arrows to

manually set desired tilt and

zoom.

d] Exit Tracking Settings.

PRO TIPS

You can change Track Settings at any time.

Use Surf + Turf in areas that do not have elevation changes, meaning on a level

playing ﬁeld.

1a 1b

Off Off

How to setup in Surf + Turf Mode:

1. Sync your Tag to the Base, Repeating Step 4 in the Quick Start section

on page 3, and toggle tracking on for your Tag.

2. Press START/SETTINGS and then START

3. When prompted, about 3-seconds, place Tag over Base and press

(+) BUTTON.

4. Proceed to the level at which you’ll be performing your activity, ensure that

you’re centered in front of the Camera and press (+) BUTTON again.

You must be at least 20 ft. from the Base when doing the second button press.

5. Calibration in Surf + Turf mode is now complete.

NOTES

The LED light on front of Base will go from a rapid blinking to a slow and steady

blink when calibration is complete.

Use the LED on front of Base to center yourself in front of Camera. The LED is

brightest when directly facing the Base/Camera.

PRO TIP

You can use the arrows and zoom

buttons–mentioned above under

TILT MODE OFF–to manually adjust

the position of subject in the

viewﬁnder.

CAMERA SETTINGS

1. Video Mode

a) To adjust record resolution, go

to the TRACK APP and select

CAMERA SETTINGS

b) By default, the Camera is in

VIDEO MODE and set to

1080p60. Select RESOLUTION

and choose your new

resolution.

c) c) Then exit out of CAMERA

SETTINGS. You’ll need to

resume tracking and recording

by pressing the START

BUTTON.

It may be confusing, but the

START BUTTON is displayed

as a “pause” icon.

2. Single Photo Mode

a) To switch to Photo Mode, go

to the TRACK APP and select

CAMERA SETTINGS

b) Select PHOTO MODE

c) The Photo Mode Settings

will appear. From this menu,

you’ll be able to adjust the

PHOTO MODE - Single or Burst

- and the DELAY time from

when you trigger the shutter.

d) To trigger a single photo,

press the (+) BUTTON on Tag,

and the Camera will take a

12MP still image.

2a 2b

Optic65 Resolution Options

4k @ 30 fps

2.7k @ 30 fps

1080p @ 30, 60, 120 fps

720p @ 240 fps

(future ﬁrmware update)

3. Burst Photo Mode

a) To take multiple (burst)

photos, adjust the Photo Mode

to BURST.

b) The Burst Photo Mode Settings

will appear. From this menu,

you’ll be able to adjust the

Burst Rate and Delay.

c) To trigger photo bursts, press

the (+) BUTTON on Tag and the

Camera will rapid ﬁre based on

your settings.

3a 3a

MULTI MODE

1. Sync New Tags

Sync the additional Tag(s) to the

Base, Repeating Step 4 in the

Quick Start section on page 3,

and toggle tracking on for each.

The TAG MANAGER is accessible

via the TRACK APP or the Tag

MANAGER APP.

2. Toggle Tracking On

Each new Tag will now be

visible in the TAG MANAGER.

Toggle tracking on for each

Tag you’d like to follow/track.

3. Select Follow Mode

Enter Multi-Mode by selecting

an option under FOLLOW MODE:

Closest to Base

Fastest moving Tag

Button Press to call Camera/Base

Altri manuali per Soloshot3

Indice

Altri manuali Soloshot Macchina fotografica digitale

Soloshot

Soloshot 3 Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente