Solutions MS-C01 Manuale utente
Installation Guide
MS-C01
Ceiling Mount
Revision: 1.0 - April 2022
02
support@m4sol.com |www.m4sol.com
MS-C01 USER GUIDE
What’s Included
Not Included
Pieces Item
1 Ceiling Mount
1Cross recessed, pan head with tail machine teeth
screw, UNC 1/4’’-20*8
6 Pan head, flat tail, self-tapping lock screws, M3*6
Pieces Item
4 *M5 Expansion screws
* These screws need to be provided by the installer based on the thickness of the ceiling.
Caution: It is the responsibility of the installer to ensure the camera and its mounting hardware are firmly
secured, so that the camera does not fall. Anchoring hardware appropriate to the wall type must be selected
and provided by the installer.
MS-C01 USER GUIDE
03
support@m4sol.com |www.m4sol.com
Installation
Step 1.
a) Position upper component of anchor on ceiling, and mark ceiling for placement (markers indicated in
steps 2 and 4).
b) Pre-drill holes in ceiling.
NOTE: Check depth of the mounting holes by inserting a straw or toothpick, and measure against the length
of screws.
Step 2.
a) Please top component of mount back over marking on ceiling.
b) Secure using M5 expansion screws (not included).
Step 3.
Secure bottom component of mount to the bottom of the camera, using included M3*6 screws.
04
support@m4sol.com |www.m4sol.com
MS-C01 USER GUIDE
Installation
Step 4.
a) Attach camera to mount.
b) Secure using M3*6.
www.m4sol.com
Indice
Altri manuali Solutions Rack e supporto
