SOMFY Sonesse 30 PoE Manuale utente
Sonesse 30 PoE
EN Instructions
FR Notice
ES Instrucciones
Sonesse 30 PoE EN
Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved. 3
ORIGINAL INSTRUCTIONS
These instructions apply to all Sonesse 30 PoE drives, the different versions of which
are available in the current catalogue.
PoE = Power Over Ethernet.
CONTENTS
1.
Prior information...........................................................................................
5
1.1.
Field of application............................................................................
5
1.2.
Liability ...............................................................................................
5
2.
Installation......................................................................................................
5
2.1.
Assembly ............................................................................................
6
2.2.
Wiring .................................................................................................
8
2.3.
Commissioning ..................................................................................
9
2.4.
Tips and advice on installation.........................................................
9
3.
Use and maintenance ....................................................................................
11
3.1.
Operation ...........................................................................................
11
3.2.
PROG button.....................................................................................
11
3.3.
LED feedback .....................................................................................
11
3.4.
Tips and advice on operation...........................................................
12
4.
Technical data ................................................................................................
13
EN Sonesse 30 PoE
4Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved.
GENERAL INFORMATION
Safety instructions
DANGER
Indicates a danger which may result in immediate death or
serious injury.
WARNING
Indicates a danger which may result in death or serious
injury.
PRECAUTION
Indicates a danger which may result in minor or moderate
injury.
CAUTION
Indicates a danger which may result in damage to or
destruction of the product.
Sonesse 30 PoE EN
Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved. 5
1.PRIOR INFORMATION
1.1.Field of application
The Sonesse 30/24 drives are designed to motorise all types of:
▪
Interior vertical blinds which front rail moves solely by gravity with a mass less
than 15kg.
1.2.Liability
Before installing and using the drive, please read these instructions carefully.
In addition to the instructions provided in this guide, please also comply with the
instructions provided in the attached Safety instructions document.
The drive must be installed by a home motorisation and automation
professional, in accordance with Somfy’s instructions and the applicable
regulations in the country of installation.
Any operation of the drive outside the field of application described above is
prohibited. Such use, and any failure to comply with the instructions given in this guide
and in the attached Safety instructions document, absolves Somfy of any liability and
invalidates the warranty.
After installing the drive, the installer must inform his customers of the operating and
maintenance conditions for the drive and must provide them with the operating and
maintenance instructions, and the attached Safety instructions document. Any After-
Sales Service operation on the drive must be performed by a home motorisation and
automation professional.
Never begin installing without first checking the compatibility of this product with the
associated equipment and accessories. If in doubt when installing this product and/or
to obtain additional information, contact a Somfy representative or visit the website
www.somfy.com.
2.INSTALLATION
WARNING
•
These instructions are mandatory for the home motorisation and
automation professional installing the drive.
•
Comply with current standards and legislation in the country of installation.
EN Sonesse 30 PoE
6Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved.
CAUTION
•
Never drop, knock or puncture the drive or immerse it in liquid.
•
Install an individual control point for each drive.
•
To insure optimized silent operation, the gaps between the drive, the
accessories, the tube and the tube end piece must be minimized.
•
Never cut or remove the cable label.
2.1.Assembly
2.1.1.Replace the head cover with a different color (Optional)
NOTICE
Head has interchangeable covers to fit with the fabric.
1] Unclip the cover.
2] Clip the new cover on the head.
2.1.2.Preparing the drive
CAUTION
•
Sonesse 30 PoE : interior diameter of the tube has to be Ø28,8 mm or
greater.
•
The crown is mandatory.
1] Fit the accessories required to integrate
the drive into the tube:
ð
Fit the crown (a) and the wheel (b) to
the drive.
2] Measure the length (L) between the inner
edge of the drive head and the rim of the
wheel.
L
1]
2]
ab
Sonesse 30 PoE EN
Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved. 7
2.1.3.Preparing the tube
1] Cut the tube to the required length.
2] Deburr the tube and remove the debris.
1] 2]
2.1.4.Assembling the drive-tube
1] Slide the drive into the tube. For tubes
with a smooth interior, position the cut
notch on the crown.
2] The wheel must be locked in place to
prevent any movement in the tube.
1]
2]
L
▪
This can be achieved by fastening the tube to the wheel using self-tapping
screws, or steel pop rivets, placed between 5mm and 15mm from the outer
edge of the wheel, regardless of the tube.
▪
or by using a wheel lock, for non-smooth tubes.
CAUTION
The screws or pop rivets must only be fastened on the wheel and not on the
drive.
2.1.5.Installing the drive-tube assembly
CAUTION
•
The motorised product must not be compressed between the brackets.
•
Do not use the plastic cross without the metal bracket adapter.
▪
The drive can be fixed directly onto the drive bracket (the screw holes are
spaced 29mm apart). Use 2screws (3.5 x 9mm). A manual tightening torque of
1Nm is recommended.
▪
Drive plates are also available in the current
catalogue (Select the correct drive plate
adapted to the bracket and check the
torque requirements in the system). Use
EN Sonesse 30 PoE
8Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved.
the 2 screws (3 x 6mm) delivered with the
motor plate. A manual tightening torque of
0,6Nm is recommended.
1] Screw the bracket adapter to the drive
head.
2] Install and fix the drive-tube assembly
onto the end bracket (c) and onto the
drive bracket (d).
dc
CAUTION
•
Do not let the tube hanging by the head side only.
•
Ensure that the drive-tube assembly is secured onto the end bracket. This
operation prevents the tube-drive assembly from coming out of the end
bracket attachment.
•
Light gap reduced: Do not pinch cable or be careful they are not in contact
with moving parts.
2.2.Wiring
PRECAUTION
•
Cables routed through a metal wall must be protected and insulated by
sleeving or sheathing.
•
Secure the cables to prevent any contact with moving parts.
•
If the drive is used outdoors and if the power supply cable is of the H05-VVF
type, run the cable in a UV-resistant duct, e.g. trunking.
•
The drive cable cannot be removed. If it is damaged, return the drive to the
After-Sales department.
CAUTION
•
Leave the drive power supply cable accessible: the product must be easily
replaceable.
•
Always make a loop in the power supply cable to prevent water from
entering the drive.
Sonesse 30 PoE EN
Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved. 9
Connect the PoE drive to the PoE switch.
NOTICE
•
Only use a compatible switch to connect the PoE drive: refer to the
corresponding switch guide.
•
Take care on the power delivered by the switch.
•
Female to female connector (provided with the drive) and extension cable
Cat 5e (mini) could be used if needed.
•
Length between switch and motor is 100 m (330 feet) maximum.
2.3.Commissioning
The commissioning is done by WebGUI:
▪
Thanks to a web browser on a computer connected to the network, enter the
drive’s Hostname (present on the label) in the address field.
▪
And follow instructions.
To control the drive, refer to “PoE Integration guide” on Somfy project website:
https://www.somfy.com/projects/downloads.
2.4.Tips and advice on installation
2.4.1.Questions about the product?
Observations Possible causes Solutions
The motorised product
does not work.
Wiring is incorrect. Check the wiring and
modify it if necessary.
The drive is in thermal
protection mode. LED Red
= ON then lights OFF.
Wait for the drive to cool
down. Notice that the drive
will be hot. Do not touch it.
An incorrect extension
cable has been used
Check the extension cable
(Cat 5e mini).
End-limits are not properly
adjusted.
Adjust the end-limits.
EN Sonesse 30 PoE
10 Copyright© 2022 SOMFY ACTIVITES SA. All rights reserved.
Observations Possible causes Solutions
The motorised product is
noisy.
The wheel and the crown
are not adapted to the used
tube.
Change the wheel and the
crown.
The mechanical plays
between drive, accessories,
tube and end of tube are
too high.
The mechanical plays
between drive, accessories,
tube and end of tube must
be decreased to the
minimum.
The wheel is not properly
fixed to the tube.
Fix the wheel properly to
the tube.
The equipment is
constrained between the
brackets.
Decrease the constraint
between the brackets.
The length of the notch is
not adapted to the drive
hook or to the used crown.
Adapt the length of the
notch to the drive hook or
to the used crown.
Debris, screws or other are
in the tube.
Empty the tube.
The temperature of the
environment is not in
conformity with the
operating temperature.
Change the environment
temperature.
The motorised product
stops too soon or too late.
The end limits of the
motorised product slip.
Re-set the end limits.
The motorised product
does not fall within the
recommended weight
limits.
Check the compatibility of
the motorised product.
Consult a Somfy contact or
visit www.somfy.com.
Altri manuali per Sonesse 30 PoE
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali SOMFY Motore
SOMFY
SOMFY Oximo WT Manuale utente
SOMFY
SOMFY J4 RTS Istruzioni per il montaggio
SOMFY
SOMFY Roll Up 28 RTS Manuale utente
SOMFY
SOMFY Oximo Series Istruzioni per il montaggio
SOMFY
SOMFY LT50 RS485 Manuale utente
SOMFY
SOMFY Sonesse Utra 50 DC Manuale utente
SOMFY
SOMFY Tilt Only 50 WF RTS Manuale utente
SOMFY
SOMFY Sonesse 30 Manuale utente
SOMFY
SOMFY LS 40 Manuale utente
SOMFY
SOMFY Movelite WireFree RTS Manuale utente
SOMFY
SOMFY Sunea io Manuale utente
SOMFY
SOMFY Tilt Only 50 WF RTS Manuale utente
SOMFY
SOMFY PHOENIX PH 30/14 Manuale utente
SOMFY
SOMFY LV25 Manuale utente
SOMFY
SOMFY Elite Smart Shades R28 WireFree RTS Istruzioni operative
SOMFY
SOMFY WireFree RTS Istruzioni operative
SOMFY
SOMFY Altus RTS 120 V Istruzioni operative
SOMFY
SOMFY Sonesse 30 PoE Istruzioni operative
SOMFY
SOMFY ILT 2 Manuale utente
SOMFY
SOMFY LS 40 Manuale utente
