SOMFY Connect UAI Plus Guida rapida alla configurazione
INTEGRATION GUIDE
LUTRON® INTEGRATION
via SOMFY CONNECT™ UAI PLUS
TABLE OF CONTENTS
VERSION 1.0 | OCTOBER 2020 | Prepared by PROJECT SERVICES
I. OVERVIEW --------------------------------------------------------- 3
DESCRIPTION
SYSTEM REQUIREMENTS
CONNECTIONS & LEDs
LUTRON COMPATIBILITY
II. INSTALLATION ------------------------------------------------------ 4
MOUNTING & POWER
WIRING TO SYSTEM FOR OPERATION
III. LUTRON SYSTEM SETTINGS ------------------------------------------- 5
NETWORK SETTINGS
TELNET SETTINGS
INTEGRATION SETTINGS
IV. UAI PLUS SYSTEM SETTINGS ------------------------------------------- 8
CONNECTING TO UAI PLUS INTERFACE
NETWORK & INTEGRATION SETTINGS
SDN INTEGRATION REPORT
V. INTEGRATION CONFIGURATION -------------------------------------- 11
LUTRON DEVICES
ADDING LUTRON DEVICES
COMMAND MAPPING LUTRON DEVICES
TESTING & VALIDATION
BUTTON PROGRAMMING EXAMPLES
LUTRON® INTEGRATION via UAI PLUS
INTEGRATION GUIDE
2of 16
PC running Windows 10 or higher
Chrome 59.0.3071 or higher
Latest Somfy Connect UAI Plus Firmware
NOTE: A PC running Windows 10 or higher with Chrome 59.0.3071 or higher is required for motor commissioning
and Somfy Connect UAI Plus firmware updates. A mobile device can be used to control motors once commissioning is complete.
The Somfy Connect™ UAI Plus is designed to commission and control residential and commercial
Somfy Digital Network™ (SDN) motors through IP and RS-232 serial communication.
Integration for the Somfy Connect UAI Plus enables third-party control from Lutron® systems
including HomeWorks® QS, RadioRA 2, RA2 Select, GRAFIK Eye® QS, Quantum® and myRoom Plus.
Platform Compatibility Lutron System Requirements
GRAFIK Eye QS Yes QSE-CI-NWK-E
Caseta No -
RA2 Select Yes RR-SEL-REP2-BL
RadioRA 2Yes RR-MAIN-REP
HomeWorks QS Yes HQP6-1or 2
Quantum Yes QSE-CI-NWK-E
myRoom Prime No -
myRoom Plus Yes GCU-HOSP
Vive No -
I. OVERVIEW
SYSTEM REQUIREMENTS
CONNECTIONS & LEDs
LUTRON COMPATABILITY CHART
IP
(Ethernet)
Port 1
(3rd Party Serial
Connections)
Reset
(Under Removable Cap)
Port 2
(SDN bus)
LED BEHAVIOR:
FAST BLINK
START UP
SLOW BLINK
ONLINE
GREEN
DHCP ACTIVE
AMBER
STATIC IP ACTIVE
3of 16
The Somfy Connect UAI Plus is mounted on a DIN rail either near an automation system,
network switch, or anywhere close to the beginning of an SDN network.
Power is received through the SDN bus via a Bus Power Supply
II. INSTALLATION
MOUNTING & POWER
WIRING TO SYSTEM FOR OPERATION
IP Integration
a. Connect Ethernet Port to the building IP network to which the 3rd Party System is also connected
b. Connect Port 2 to any SDN Device Port
4of 16
RADIO RA2:
HOMEWORKS QS:
The Lutron Integrator must disable DHCP and provide an assigned
IP Address, entered in the UAI Plus Ethernet Settings
NOTE: A Static IP Address is required to maintain Telnet connection
III. LUTRON SYSTEM SETTINGS
LUTRON NETWORK SETTINGS
RA2 SELECT:
.
GRAFIK EYE QS, QUANTUM & MYROOM PLUS:
*Network Settings will need to be configured upon initial setup and provided by the Lutron Integrator
5of 16
HOMEWORKS QS:
The Lutron Integrator must create a dedicated Telnet Username
and Passphrase, entered in the UAI Plus Telnet Settings
NOTE: Telnet channels cannot be shared. If running the Lutron Home Control + app and the Somfy Connect UAI Plus
application, it is necessary to establish two separate Telnet channels for these two operations to occur.
LUTRON TELNET SETTINGS
RA2 SELECT:
GRAFIK EYE QS, QUANTUM & MYROOM PLUS:
*Telnet Settings will need to be configured upon initial setup and provided by the Lutron Integrator
RADIO RA2:
NOTE: RA2 Select is limited to only one Telnet connection
6of 16
LUTRON INTEGRATION SETTINGS
HOMEWORKS QS:
RADIO RA2:
For the Somfy Connect UAI Plus to see Lutron devices they must be enabled for integration.
All required devices should be confirmed enabled by the Lutron Integrator.
GRAFIK EYE QS, QUANTUM, MYROOM PLUS:
*Integration Settings will need to be configured upon initial setup and provided by the Lutron Integrator
RA2 SELECT:
*RA2 Select integration can only be enabled for the entire system and not individual devices
7of 16
IV. UAI PLUS SYSTEM SETTINGS
CONNECTING TO UAI PLUS INTERFACE
1. Disable the WiFi on the computer, unless connecting to the UAI Plus over a WiFi network
2. Connect Windows PC to the Ethernet Port on the UAI Plus
3. Open the File Explorer then double-click the Network folder
Note: If prompted that network discovery is turned off, click “OK”. Right-click on the
top bar then choose “Turn on network discovery and file sharing”. In the following window,
double-click “No, make the network that I am connected to a private network”.
4. The UAI Plus icon will appear in the list of devices, which means it is now connected. Double-click the UAI Plus
icon in the device list to open a web browser connecting to the UAI Plus homepage
8of 16
NETWORK & INTEGRATION SETTINGS
From the Somfy Connect UAI Plus homepage, hover over the three bars on the top right then click “Settings”:
UDP:
1. Confirm SERVER is set to ENABLE
2. Set LISTEN_PORT to 23
3. Click Restart to enable new settings
Open the UAI Plus tab to enter the UAI Plus Settings & Properties page:
TELNET SETTINGS:
1. Select the Lutron System from SYSTEM dropdown
2. Enter Lutron IP Address in the ADAPTOR_IP field
3. Select ENABLE from the CONNECTION dropdown
4. Enter Telnet Login Username in the LOGIN field
5. Enter Telnet Login Passphrase in the PASSWORD
field –within a few moments the login will take place
Open the Lutron tab to enter the Lutron Settings & Properties page:
NOTE: Prior to integration, confirm the UAI Plus and SDN System are fully configured and functional.
NOTE: A Telnet Username and Password
is not required for RA2 Select
9of 16
SDN INTEGRATION REPORT
To generate the SDN Integration Report, hover over the SDN tab then click “Report”. The
Integration Report is downloaded as a .csv file and viewed in Excel.
10 of 16
The Integration Report lists the available group addresses required for Lutron integration. The
Group Name is selected when command mapping Lutron devices.
Altri manuali per Connect UAI Plus
1
Questo manuale è adatto per i seguenti modelli
1
Indice
