-
Timer programming:
4.1 Firstuse
When
setting or changing values:
... Values which flash can be changed,
... Always press eto end and store entered values,
... If no information is entered for approx, 20 seconds, the programming menu quits automatically,
Information entered before this will not be stored,
Display
UP button
STOP/IP button
DOWN button
SET button
Calendar button
Programming button
Before setting the time and date, check whether the equipment's summer/winter time setting is correct.
Winter time is the factory default setting.
Setting summer or winter time
The corresponding setting is shown on the display as "S" for summer time or
"W" for winter time.
Changing
from winter to summer time
1.
Press ebriefly'" time flashes.
2.
Press ufor more than 5 seconds'" display shows "S" for summer time.
3.
Press ebriefly (save)
...
time displayed
Changing from summer to winter time
1. Press
ebriefly ~ time flashes.
2. Press V for more than 5 seconds'" display shows "W" for winter time
3. Press ebriefly (save)
...
time displayed.
Setting the time
1.
Press ebriefly'" time flashes
2. Set time using 0,~ button
3. Press ebriefly (save)
...
time displayed
4.2 Setting operation mode
The
Chronis RTS/RTS L has 5 different operating modes:
Ifour
_ command
ond_
SummerlWinter time
Currantday
MIn. ~:~~~
3:Wednesdi:ly
4:Thursday
5: Friday
6: Saturday
7: &Jnday
Ooy
Setting the date
1.
Press @ briefly'" date displayed (if no information entered within
10
seconds, display jumps back to time)
2. Press e briefly'" day flashes.
Set day using 0~ button
3. Press briefly'" month flashes.
Set month using 0. ,~ button
4.
Press ubriefly'" year flashes.
Set year using
<S:t..j]>
button
5. Press ebriefly (save) ... time displayed.
The day of the week is set automatically. The day/month/year selec-
tion can be gone through in reverse order using the DOWN button.
4.2.1 Weekly programme (T 20.0 0 )
Roller shutters are opened or closed automatically at individually set times,
M; -
Default opening time is set at 6:00, default closing time is 20:00,
:2::] EI -
Different times can be entered for every day of the week, The display always shows the day of the week (or all weekdays) for which the ente-
.,.
20DO red time applies,
Changing the weekly programme (if required)
1, Press and maintain euntil display shows the weekly programme.
?tlCC
(if not already set),
2, Press @i briefly'" time flashes.
3, Press briefly'" UP switching time flashes.
4,
Press @ until the desired day of the week or all weekdays are selected *
5, Set UP time using 0~) button,
6,
Press briefly'" DOWN switching time flashes.
7, Set DOWN time using') <J button,
If required, use @button to select the next week day and repeat steps (3) to (7).
8. Press @I) briefly (save)
...
time displayed,
*1 : Monday
2: Tuesday
3 : Wednesday
4 :Thursday
5 : Friday
6 : Saturday
7 : Sunday
