Sonic Impact Technologies IP-P22 Manuale utente

iP-22 FCC Regulations

FCC Declaration of Conformity Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can be determined by turning the

equipment off and then on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•Increase the separation between the equipment and receiver.

•Connect the equipment to a different outlet so that the equipment and receiver are on different branch

circuits.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Sonic Impact could void the user’s authority to operate the

equipment.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

Sonic Impact Technologies LLC ©Sonic Impact Technologies LLC

2555 State Street iP-22 is a trademark of Sonic

San Diego, California 92101 Impact Technologies LLC

USA iPod®is trademark of Apple

Computer, Inc., registered in the

www.si-technologies.com U.S. and other countries

Important operating and maintenance (servicing) instructions.。

CAUTION: TO PREVENT ELECTRONIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION

CORD.RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS I-FUSION TO RAIN OR MOISTURE

IMPORTANT iP-22 SAFETY INSTRUCTIONS

1. Read instructions --All Safety and operating instructions should be read before the iP-22 is used.

2. Retain instructions--The operating instructions should be retained for future reference.

3. Heed warnings--All warnings in the operating instructions should be read and adhered to.

4. Follow instructions--All operating instructions should be followed.

5. WARNING: Avoid water and moisture--Keep away from all liquids. To reduce the risk of fire or electric shock,

do not expose the iP-22 to rain or moisture.

6. Location--The iP-22 should be placed in a stable, level location, away from external heat sources and with

adequate ventilation. Do not expose the iP-22 to temperature or humidity extremes. Protect from

exposure to dirt, sand, and dust. Note that the speakers are magnetically shielded to prevent distortion of

TVs and computer monitors, but keep magnetic storage media at least four inches from the iP-22 to avoid

data loss.

7. Power supply--When not powering off the internal rechargeable battery, the iP-22 should only be connected

to the power supply provided with your unit or as described in the operating instructions and as marked on

the iP-22.

8. Power cord use and care--Power cords should be located so that they are not likely to be walked on or

crushed by placing other objects on top of them. Check all attachments regularly. Do not bypass the

proper grounding or polarization of the power plug. If your iP-22 is not to be used for an extended period of

time, unplug and stow the power cord.

9. TO PREVENT THE RISK OF ELECTRIC SHOCKAND DAMAGE TO THE UNIT, DO NOTREMOVE THE SPEAKER GRILLES

OR OPEN THE UNIT FOR SERVICING EXCEPT TO REPLACE THE RECHARGEABLE LITHIUM ION AS INSTRUCTED IN

THIS MANUAL. PLEASE REFER SERVICING TO QUALIFIED SONIC IMPACT PERSONNEL.

10. Cleaning--Use only a soft dry cloth. Do not use cleaning chemicals of any kind.

11. Lightning Storms--Unplug the apparatus during lightning storms to prevent accidental damage.

12. Accessories--Only use attachment accessories specified by Sonic Impact Technologies.

13. Damage Requiring Service--The iP-22 should be serviced by qualified service person when:

·The power-supply cord or the plug has been damaged.

·Objects have fallen onto or liquid has been spilled into the i-Fusion.

·The iP-22 has been exposed to rain.

·The iP-22 does not appear to operate normally or exhibits a marked change in performance.

·The iP-22 has been dropped or the enclosure has been damaged.

14. Servicing--The user should not attempt to service the iP-22 themselves. Servicing should be referred to a

qualified service person or returned to the dealer. For questions about warranty and service call Sonic

Impact Technologies, LLC at service@si-technologies.com .

ONE-YEAR LIMITED WARRANTY

Sonic Impact Technologies warranties that all of its products are free from defects in material and

workmanship in the course of normal and reasonable use for a term of one year from the date of purchase.

This warranty is the exclusive and only warranty in effect relative to Sonic Impact Technologies powered

iP-22 speaker system and any other warranties, either expressed or implied, are invalid. Neither Sonic Impact

Technologies, LLC nor any authorized Sonic Impact Technologies, LLC reseller are responsible for any incidental

damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not

applicable where prohibited.)

Sonic Impact Technologies, LLC’s obligation under this warranty does not apply to any defect, malfunction

or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment or the use of

the speaker systems with any equipment for which they were not intended.

The terms of this warranty apply only if the iP-22 speaker systems are returned to the respective authorized

Sonic Impact Technologies, LLC reseller where they were purchased.

CUSTOMER SERVICE

For service or warranty of the electronics please contact:

service@si-technologies.com

PACKING CONTENT

iP-22System ACPower Stereo iPod®Adapter Manual Quick

Adapter Cable Sleeves Connect

Instruction

·iP-22 portable speaker case

·9V 1.2AAC power adapter

·Ø3.5 stereo cable

·iPod mini、iPod 3G 10GB15GB/iPod 4G 20GB/iPod PHOTO 30GB、iPod 3G 30GB/ iPod 4G 40GB/ iPod PHOTO

40GB60GB adapter sleeves

·Usermanual

·Quick connect instructions

iP-22 Diagram：

1、Compartment Lock

2、iPod®30 Pin Docking Station

3、Speaker Driver Unit

4、Port tube

5、Battery compartment

6、Input Jacks

7、Rubber

8、Belt clip

9、iPod®Adapter sleeve

10、iPod®30 Pin Docking Station

11、Power On/Off and LED

LOCATING YOUR iP-22 SYSTEM

Best to position the iP-22 system on a stable, level surface within 1-2.5 meter from the listener. The iP-22 system may be

placed near video displays, such as TV sets and computer monitors, without causing distortion to the image.

CONNECTING TO YOUR iP-22

Warning: Ensure that iP-22 system is in the POWER OFF mode before making any connections and before docking

the iPod into the iP-22 system. To ensure proper operation, please carefully follow the connection sequence as

described below and in the order indicated.

Attach the iPod adapter sleeve, provided with your iP-22, that matches the model of your iPod. Each sleeve will

be marked with the iPod models. An iPod model with a 30 PIN connector can be connected directly to the 30 pin

docking station located on the iP-22 system. An older iPod model without a 30 PIN connector can be connected

via the AUDIO IN port located at the side of your iP-22 case and by using the 3.5 mm stereo cable, included. When

you’re sure that either method of connection has been made you are ready to play the iP-22 speakers.

4AAbatteries must be inserted to the iP-22 or you may use the optional AC adapter power supply.

POWER

The iP-22 system uses a universal power supply via 9V@1.2A power adapter or as a portable system uses 4 AAbatteries as its

power supply

When the iPod is connected to the iP-22 system, insert the AC adapter barrel connector into the jack marked DC IN

9V , and then insert the universal power adaptor blade end into your AC power wall jack. Your iP-22 is

ready to play.

AA batteries power supply

The iP-22 system operates using 4AA batteries, place 4AA’s into the battery compartment (see battery replacement

instructions). Your iP-22 speaker system is now ready to operate.

Remarks: The output of using power adapter is twice as great as the output of using battery

When docked, your iPod will also recharge when using the AC adapter.

START PLAYING

1、Slide power switch to the right for “AUTO ON” and note that the power indicator will illuminate.

2、Select and play your favorite music using your iPod。

VOLUME CONTROL

The buttons on the front panel are themaster volume controls for the iP-22 system. Press and hold “+”

to increase the volume and then “-”to decrease the volume. The volume will start at 40% maximum volume

position every time you re-start your iP-22 system. This will avoid disturbing others when booting it up.

POWER OFF

To minimize power consumption, please slide power switch to OFF when you are no longer using the device

If your iP-22 is not to be used for an extended period of time, remove the AA battery from iP-22 .Please note that the

iP-22 has an “AUTO SHUT-DOWN (STANDBY) function which prevents excess power consumption during idle

play.

AUTO SHUT-DOWN (STANDBY)

When the power switch isset at the “AUTO ON”position, the iP-22 system will shut down automatically and goes

into standby mode if an audio signal is not detected within 5 minutes. The LED on the power switch will then turn

to green and glitter. The LED will automatically stop glittering when an audio signal is detected and

the iP-22 system will automatically power on. Power consumption will be reduced in this “standby” mode, but we

suggest that you set the power switch to the “OFF” to shut down the iP-22 system completely when not in use for

an extended period of time to save battery life.

AA BATTERY REPLACEMENT

While using AA battery as the power supply, the indicator turns green while the battery is full. When the

indicator turns red , it is a warning that the battery is not full enough .The system will operate again after

battery replacement.

Under normal use, 4 AA battery can last at least 8 hours( depending on the volume setting and the play interval).

Please note the following illustration to replace theAA battery.

SPECIFICATIONS

The excellent sound quality of the iP-22 comes from our highly professional design, which includes a customized

Hi-Fi Neodymium driver, digital amp, and the latest digital equalizer circuitry

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sonic Impact Technologies Stazione di attracco

Sonic Impact Technologies

Sonic Impact Technologies i-Fusion Manuale utente

Sonic Impact Technologies

Sonic Impact Technologies iP-22 Manuale utente

Sonic Impact Technologies

Sonic Impact Technologies i-F2 Manuale utente

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente