Sonnen sonnenProtect 2500 Manuale utente
Installation instructions | for authorised electricians
sonnenProtect 2500
for sonnenBatterie hybrid 9.53
Publisher
sonnen GmbH
Am Riedbach 1
D-87499 Wildpoldsried
Service number +49 8304 92933 444
Email [email protected]
Document
Document number 535
Part number 1000050
Version X00
Valid for AU
Publication date 25/09/2018
IMPORTANT
Read this documentation carefully before installation / operation.
Retain this document for reference purposes.
EN
Installation instructions sonnenProtect 2500
Table of contents
KD-535 | 1000050 | EN | X00 iii
Table of contents
1 Information about this document........................................................................................................ 5
1.1 Target group of this document ................................................................................................... 5
1.2 Designations in this document .................................................................................................... 5
1.3 Explanation of symbols................................................................................................................... 5
2 Safety.............................................................................................................................................................. 6
2.1 Intended use....................................................................................................................................... 6
2.2 Requirements for the electrician................................................................................................6
2.3 Operating the product ................................................................................................................... 6
2.4 Product modifications or changes to the product environment.................................... 7
2.5 Voltage inside the sonnenProtect.............................................................................................. 7
3 Product description...................................................................................................................................8
3.1 Technical data....................................................................................................................................8
3.2 System components of the sonnenProtect............................................................................9
3.3 Type plate............................................................................................................................................ 9
3.4 Symbols on the outside of the sonnenProtect...................................................................... 9
3.5 Storage and transport................................................................................................................... 10
4 Mounting .......................................................................................................................................................11
4.1 Scope of delivery..............................................................................................................................11
4.2 Additional parts required ...............................................................................................................11
4.3 Selecting the installation location..............................................................................................12
4.3.1 Requirements for the installation location............................................................... 12
4.3.2 Observe minimum distances.........................................................................................12
4.4 Mounting the sonnenProtect......................................................................................................12
5 Electrical installation................................................................................................................................13
5.1 Installing the emergency circuit(s)........................................................................................... 14
5.1.1 Electrical consumers in emergency operation.......................................................14
5.1.2 Implementing the emergency circuit(s)....................................................................14
5.2 Positioning components in the electrical distributor .........................................................15
5.3 Wiring components in the electrical distributor...................................................................15
5.4 Connecting earthing cable to storage system..................................................................... 18
5.5 Connecting sonnenProtect to storage system ................................................................... 18
5.6 Attaching safety label to the distributor .................................................................................19
6 Commissioning......................................................................................................................................... 20
6.1 Commissioning checklist ............................................................................................................ 20
6.2 Switching on the sonnenProtect and the storage system.............................................. 20
6.3 Setting up the sonnenProtect .................................................................................................. 20
6.4 Setting the backup buffer .......................................................................................................... 20
6.5 Testing emergency operation.....................................................................................................21
7 Decommissioning.....................................................................................................................................22
7.1 Switching off the sonnenProtect .............................................................................................22
7.2 Disconnecting the sonnenProtect from the power supply ............................................22
Table of contents
iv Installation instructions sonnenProtect 2500
8 Uninstallation and disposal ...................................................................................................................23
8.1 Uninstallation....................................................................................................................................23
8.2 Disposal..............................................................................................................................................23
9 Troubleshooting....................................................................................................................................... 24
Information about this document | 1
KD-535 | 1000050 | EN | X00 5 / 28
1 Information about this document
This document describes the installation of the sonnenProtect 2500 in connection with
the sonnenBatterie hybrid 9.53 storage system.
Read this document in its entirety.
Keep this document in the vicinity of the sonnenBatterie.
1.1 Target group of this document
This document is intended for authorised electricians. The actions described here must
only be performed by authorised electricians.
1.2 Designations in this document
The following designations are used in this document:
Complete designation Designation in this document
sonnenProtect 2500 sonnenProtect
sonnenBatterie hybrid 9.53 Storage system
1.3 Explanation of symbols
DANGER Extremely dangerous situation leading to certain death or serious injury if the
safety information is not observed.
WARNING Dangerous situation leading to potential death or serious injury if the safety
information is not observed.
CAUTION Dangerous situation leading to potential injury if the safety information is not
observed.
NOTICE Indicates actions that may cause material damage.
Important information not associated with any risks to people or property.
Symbol Meaning
►
Work step
1. 2. 3. … Work steps in a defined order
üCondition
• List
Table1: Additional symbols
2 | Safety
6 / 28 Installation instructions sonnenProtect 2500
2 Safety
2.1 Intended use
The sonnenProtect 2500 is an emergency power unit designed to supplement the
sonnenBatterie hybrid 9.53. The sonnenProtect- in conjunction with the appropriate stor-
age system of the sonnen GmbH - serves to supply power in the event of a power failure.
Any other use is considered improper use.
Improper use poses a risk of death or injury to the user or third parties as well as damage to
the product and other items of value. The following points must therefore be observed in
order to comply with the intended use of the product:
• Only operate the sonnenProtect together with the right storage system.
• The sonnenProtect must be installed by an authorised electrician.
• The sonnenProtect must only be connected to the storage system as described here.
• Generators (e.g. a PV system) must never be connected after the output of the
sonnenProtect.
• Intended use includes observing this document as well as all accompanying product doc-
umentation of the appropriate storage system.
• The sonnenProtect must only be used at suitable installation location.
• The transport and storage conditions must be observed.
Especially the following uses are not permissible:
• Operation in flammable environments or areas at risk of explosion.
• Operation in locations at risk of flooding.
• Operation outdoors.
Failure to comply with the conditions of the warranty and the information spe-
cified in this document invalidates any warranty claims.
2.2 Requirements for the electrician
Improper installation can result in personal injury and/or damage to components. For this
reason, the sonnenProtect must only be installed and commissioned by authorised electri-
cians. Authorised electricians must meet the following criteria:
• The electrician must be a person with a technical knowledge or sufficient experience to
enable him/her to avoid dangers which electricity may create.
• The company for which the electrician works must be certified by sonnen GmbH.
• The electrician must have successfully complete sonnen GmbH certification training for
the product.
2.3 Operating the product
Incorrect operation can lead to injury to yourself or others and cause damage to property.
• The sonnenProtect must only be operated as described in the product documentation.
• This device can be used by children from the age of eight (8) years old and individuals
with impaired physical, sensory or mental capabilities or individuals with limited know-
ledge and/or experience of working with the device, as long as they are supervised or
Safety | 2
KD-535 | 1000050 | EN | X00 7 / 28
have been trained to safely use the device and understand the resulting risks of doing so.
Children must not play with the device. Cleaning and user maintenance must not be car-
ried out by children without supervision.
2.4 Product modifications or changes to the product environment
• The sonnenProtect must only be used in its original state without any user modifications
and only when in perfect working order.
• Safety devices must never be overridden, blocked or tampered with.
• The interfaces of the sonnenProtect and the storage system must be wired in accord-
ance with the product documentation.
• All repairs on the sonnenProtect must be performed by authorised service technicians
only.
2.5 Voltage inside the sonnenProtect
5 min
The sonnenProtect contains live electrical parts, which poses a risk of electrical shock. The
storage system inverter also contains capacitors which carry voltage even after the stor-
age system is switched off. As the sonnenProtect is connected to the inverter of the stor-
age system, this means that the voltage from the inverter also flows into the
sonnenProtect. Therefore:
Disconnect the sonnenProtect and the storage system from the power supply (see
Disconnecting the sonnenProtect from the power supply).
Only then can the sonnenProtect be opened.
3 | Product description
8 / 28 Installation instructions sonnenProtect 2500
3 Product description
3.1 Technical data
sonnenProtect 2500
System data
Nominal power 2,500 W
Maximum power (30 sec.) 3,000 W
Output voltage 230 VAC +/- 10 %
Nominal frequency 50 Hz
Network configuration
in emergency operation
TN
Mains connection single-phase, L / N / PE
Mains connections fuse Miniature circuit breaker | Type B | 20 A
Operating concept Single-phase power supply via emergency cir-
cuit(s). The switch to emergency operation takes
place automatically through the storage system.
Switchover time max. 15 seconds
Threshold power none (starting from 0 W)
Dimension/Weight
Dimesion (H/W/D) in mm 230/200/122
Weight in kg 4.3
Safety / Protective devices
Protection class I / PE conductor
Degree of Protection IP30
Overvoltage category III
Protective functions Overcurrent protection, fault current protection
Residal current device integrated (Type A | 30 mA)
Ambient conditions
Environment indoor (conditional)
Ambient temperature range -5 °C ... 45 °C
Max. rel. humidity 90 %, non-condensing
Permissible installation altitude 2,000 m above sea level
Additional ambient conditions The ambient conditions prescribed for the stor-
age system apply.
Table2: Technical data
Product description | 3
KD-535 | 1000050 | EN | X00 9 / 28
3.2 System components of the sonnenProtect
Test
1
4
3
2
5
6
Illustration1: System components of the sonnenProtect
1 sonnenProtect 4 Line to emergency circuit
2 Line from storage system 5 Residual current device (F4.P)
3 Line from electrical distributor 6 Miniature circuit breaker (F3.P)
3.3 Type plate
The type plate is located on the outer surface of the sonnenProtect. The type plate can be
used to uniquely identify the sonnenProtect. The information on the type plate is required
for the safe use of the system and for service matters.
The following information is specified on the type plate:
• Item designation
• Item number
• Technical data
3.4 Symbols on the outside of the sonnenProtect
Symbol Meaning
Warning: electrical voltage.
3 | Product description
10 / 28 Installation instructions sonnenProtect 2500
Symbol Meaning
5 min
Warning: electrical voltage. Wait five minutes after switching off (ca-
pacitor de-energising time).
CE mark. The product meets the requirements of the applicable EU
Directives.
WEEE mark. The product must not be disposed of in household
waste, dispose of it through environmentally friendly collection
centres.
Observe the documentation. The documentation contains safety in-
formation.
3.5 Storage and transport
Storage and transport conditions are defined in the product documentation of the storage
system.
Observe the same storage and transport conditions for the sonnenProtect.
Altri manuali per sonnenProtect 2500
3
Indice
Altri manuali Sonnen Unità di distribuzione dell'energia
