Sonoma SGR30MLP Manuale utente
USE AND CARE MANUAL
For Model SGR30MLP
STOP!
Missing A Part?
Do Not Return Product!
The store where you made the purchase does not stock
parts for this item. If you n
eed parts, whether they are
missing or damaged, please call Customer Service at 1-800-229-5647.
Call us between 8:00 AM and 5:00 PM Eastern Time, Monday through Friday
FOR YOUR SAFETY:
1. Read this Manual before attempting to assemble or operate your grill.
2. Follow all safety instructions.
3. Check for leaks according to the directions in this Manual before operating your grill,
even if purchasing an assembled grill.
4. Keep this Manual for future reference.
5. Contact 1-800-229-5647 should you need assembly assistance or have any questions.
THIS GRILL IS FOR OUTDOOR USE ONLY.
If stored indoors, then detach and leave propane cylinder outside.
Stop! Missing a part? DO NOT RETURN PRODUCT TO STORE
or visit our website at www.sureheat.com
General Safety Instructions
IMPORTANT SAFETY INFORMATION
Read this manual carefully before using your grill to reduce the risk of fire, burn
hazard or other injury.
Extreme care should be used because of the high temperatures produced by this
appliance. CHILDREN SHOULD NOT BE LEFT NATTENDED IN AN AREA
WHERE THE GRILL IS BEING OPERATED.
This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not
allow flammable materials to come in contact with grate, burner or hot surfaces.
Use only outdoors and provide good ventilation to avoid carbon monoxide buildup which could result in injury or death.
Do not repair or replace any part of this appliance unless it is specifically recommended in this manual.A
qualified service technician should conduct all other service.
Follow the installation and servicing instructions provided with this product. Have your grill installed by a qualified ser
vice technician.
Locate the main gas supply valve so that you know how to shut the gas off to your grill.
If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a qualified
technician.
When lighting a burner, always pay close attention to what you are doing and be certain you are pushing the igniter
that lights the burner you intend on using.
Always keep your face and body as far away as from the grill as possible when lighting to reduce the risk of burn.
Extinguish all flames and do not smoke while engaging gas and igniting the grill.
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
NOTE indicates an important piece of information that needs to
be observed to ensure the proper operation of your grill.
INSTALLER:
Please retain these instructions with the owner so that they may maintain them for
future reference.
General Safety Instructions
TESTED IN ACCORDANCE WITH ANSI
Z21.58b-2005/CSA 1.6b-M02 STANDARD FOR
OUTDOOR COOKING GAS APPLIANCES.
THIS GRILL IS FOR OUTDOOR USE ONLY.
Check your local building codes for the proper method o
f
installation. In the absence of local codes, this unit should be
installed in accordance with the
N
ational Fuel Gas Code No. Z223.1-2002 and the
N
ational Electrical Code ANSI/NFPA No. 70-1990
▲WARNING
Do not use the rotisserie in the rain.
▲ WARNING
Note: Do Not operate the main burners and infrared
back burner at the same times. This can cause warping of
the roll top grill hood.
▲ WARNING
Do not use the grill in garages, breezeways, sheds or any
enclosed area. Never operate the grill in enclosed areas as
this could lead to a carbon monoxide buildup, which could
result in injury or death. Place the grill on a level surface.
Avoid moving the grill while it is operation.
▲WARNING
Always have a qualified service technician perform difficul
t
conversions or modifications.
▲WARNING
N
ever attach an unregulated gas line to the appliance.
Connection to an unregulated gas line can cause excessive hea
t
or fire.
▲ WARNING
Electrical Grounding Instructions
This appliance (rotisserie motor) is equipped with a
three-prong (grounding) plug for your protection against
shock hazard and should be plugged directly into a
properly grounded three-prong receptacle. Do not cut or
remove the grounding prong from this plug.
▲WARNING
Keep any electrical supply cords and the fuel supply hose
away from any heated surfaces.
▲WARNING
The Spare L.P. Gas Tank Barrier must be installed to
prevent storage of spare L.P. Gas Tanks. Failure to comply
with these instructions could result in a fire or explosion
that could cause serious bodily injury, death, or property
damage.
▲WARNING
CALIFORNIAPROPOSITION 65 - WARNING: The
Burning of gas cooking fuels generates some byproducts
which are on the list of substances which are known by the
State of California to cause cancer or reproductive harm.
California law requires businesses to warn customers of
potential exposure to such substances. To minimize exposure
to these substances, always operate this unit according to the
use and care manual, provide good ventilation when cooking
with gas.
This appliance is not intended to be installed in or
on recreational vehicles or boats.
FOR YOUR SAFETY
DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any othe
r
appliance.
An LP cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
▲ WARNING
DO NOT try lighting this appliance without reading the
“LIGHTING INSTRUCTIONS” section of this manual. FOR OUTDOOR USE ONLY
!
!
!
!
!
!
!
!
!
!
Grill Features
1. Roll top grill hood 9. Hood Handle
2. Rear Infrared Burner 10. Warming shelf
3. Rotisserie Motor 11. Rotisserie Spit and Forks
4. Grilling/Cooking surface 12. Side Burner
5. Side Shelf 13. Control knob: Side IR Burner
6. Rear IR control knob 14. Electronic igniter: main & side burner
7. Control knobs: main burners 15. Cart with door
8. Control knob: bottom IR burner
1
3
2
4
5
6
7
8
9
10
11
12
13
14
15
Grill Assembly
IMPORTANT: Remove all protective film from
stainless steel parts to assembly/use. This film
is installed at the factory to prevent damage that
could occur during shipment and handling.
LEFT SHELF ASSEMBLY
1. Attach the left shelf by inserting the four bolts on
the side of the grill head into the holes on the left shelf.
(See Fig. 1)
2. Fasten the four bolts to secure the shelf. (See Fig. 2)
3. Install one self tapping screw into the bottom front hole
of the shelf to lock shelf in place. (See Fig. 3)
SIDE BURNER PARTS ASSEMBLY
1. Remove side burner assembly from packaging.
(See Fig. 4)
2. Attach the side burner by inserting the four bolts on
the side of the grill head into the holes on the side burner.
(See Fig. 5)
3. Fasten the four bolts to secure the shelf. (See Fig. 6)
Fig. 1
Bolts
Holes
Fig. 2
Fi
g
. 3
Self tapping
screw
Fig. 4
Fig. 5
Fig. 6
Grill Assembly
4. Install one self tapping screw into the bottom front hole
of the shelf to lock shelf in place. (See Fig. 7)
5. Remove the nut from the orifice end of the side burner
assembly. (See Fig. 8)
6. Cross the orifice of the side burner assembly through
the hole on the bracket of the side IR burner, use the
nut to secure the orifice in position. (See Fig. 9)
7. Slide the valve assembly through the center hole in the
front of the shelf. (See Fig. 10)
8. Insert one valve screw through the bezel and in to the
side burner valve and tighten. Next, install the second
valve screw through the bezel and tighten. Make sure
the bezel is installed with the "H" facing the igniter hole.
(See Fig. 11)
9. Install metal knob, making sure to line up the flat side of
the valve stem with the flat side of the knob stem.
(See Fig. 12)
10. Install grate over side burner. (See Fig. 13)
Self tapping screw
Self tapping screw Fig. 7
Fig. 8
N
ut
Orifice
Fig. 9
Side burner
assembly
Orifice Bracket
N
ut Side IR
burner
Fig. 10
Side
b
u
r
ne
r
v
a
lve
Fig. 11
Fig. 12
Grill Assembly
IGNITER ASSEMBLY
1. The battery, igniter cap must be installed before using.
2. Slide the threaded part of the igniter through the mounting
bracket and then through the igniter hole in the front of the
side burner shelf, then install the locknut. (See Fig. 14)
3. Install the battery, positive side outside. (See Fig. 15)
4. Screw igniter cap onto igniter. (See Fig. 16)
5. Attach one end of the side burner wire to the terminal
spade of the side burner electrode. (See Fig. 17)
7. Attach the four (4) wires coming out from the side of the grill
and the side burner wire to the igniter terminals.
(See Fig. 18)
NOTE: It does not matter which wire goes to which
terminal on the igniter.
Fig. 14
Fig. 15
Fig. 17
Fig. 16
Fig. 18
Fig. 13
Grill Assembly
INTERIOR PARTS ASSEMBLY
1. Insert the top row of flavor grids into the cutouts with triangle
ridges facing up. (See Fig. 19)
2. Install cooking grates on the ledges provided on the grill to
create your cooking surface. (See Fig. 20)
3. Rest warming shelf on the bracket on the hood support.
(See Fig. 20-21)
4. Put the drip pan onto the drip pan guides under the grill
head.
(See Fig. 22)
5. Put the two hooks of the cart brace into the two slots on the
Cart base. (See Fig. 23)
6, Install one self tapping screw on the cart back to secure the
cart brace in position. (See Fig. 24)
Fig. 22
D
r
ip pan
Drip pan
g
uides
Fig. 19
Fig. 20
Fig. 21
Fig. 23
Fig. 24
Gas Requirements
L.P. GAS INSTALLATION
Sonoma Gas Grills are set to operate with L.P. gas and come with a high capacity hose and regulator assembly.
(Note: Only use the pressure regulator and hose assembly supplied with the grill or a replacement pressure
regulator and hose assemblies specified by Sonoma). This assembly is designed to connect directly to a standard
20 lb. L.P. cylinder. L.P. Cylinders are not included with the grill. L.P. Cylinders can be purchased separately at an
independent dealer.
L.P. TANK INFORMATION
Never use a dented or rusted L.P. tank or cylinder with a damaged valve.
L.P. cylinders are equipped with an O.P.D (Overfilling Prevention Device).
The device shuts off the flow of gas to a cyli nder after 80% capacity is reached. This limits the potential for release of
gas when the cylinder is heated, averting a fire or possible injury.
The L.P. cylinder must have a shut-off vlave terminating in an L.P. gas supply cylinder outlet specified, as applicable for
connection No. 510 in the standard for compressed gas cylinder valve outlet and inlet connection ANSI/CGAV1.
Cylinders must not be stored in a building, garage, or any other enclosed area. (The L.P. cylinder must have an
overfill protection device, OPD, on it.)
The L.P. gas supply cylinder must be constructed and marked in accordance with the specifications for L.P. gas
cylinders of the U.S. Department of Transportation (D OT) or the National Standard of Canada, CAN/CAS-B339
“Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods.”
L.P. TANK USE
• When turning the L.P. tank on, make sure to open the valve SLOWLY two (2) complete turns to insure proper
gas flow. Most gas tanks now come equipped with a leak detector mechanism internal to the tank, when gas
is allowed to escape rapidly it shuts off the gas supply. Opening the valve rapidly may simulate a gas leak,
causing the safety device to activate, restricting gas flow causing low flames. Opening the valve slowly will
insure this safety feature is not falsely triggered.
• When not in use, gas supply cylinder valve is to be in the “OFF” position.
• The tank supply system must be stored upright to allow for vapor withdrawal.
• The regulator and hose assembly must be inspected before each use of the grill. If there is excessive abrasion or
wear or if the hose is cut, it must be r
eplaced prior to the grill being used again.
• Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any
other enclosed area.
• Only a qualified gas supplier should refill the L.P. tank.
• Do not store a spare L.P. gas cylinder under or near the grill.
LP Gas Cylinder Installation
1. The gas supply must be turned off at the LP gas supply cylinder when this gas grill is not in
use.
2. Storage of this gas grill indoors is permissible only if the cylinder is disconnected and
removed from the gas grill.
3. Cylinders must be stored outdoors out of reach of children and must not be stored in a
building, garage, or any other enclosed area.
LP Gas Cylinder installation:
1, Pull the Cylinder lock ring up and put the
cylinder in the hole on the cart base.
(See Fig. 25)
2, Put the ring on the neck of the cylinder to
lock the cylinder on position.
(See Fig. 26)
Fig. 26
Fig. 25
Cylinder lock ring
▲WARNING
A frosty cylinder valve indicates possible gas over fill. Close the LP valve and call your dealer
immediately.
!
▲WARNING
1. Never store any extra cylinder under or near your grill.
2. Never fill your cylinder over 80% full by weight. This may cause release of gas from the safety
relief valve.
3. If the information in points 1 and 2 above is not followed exactly, a fire causing death or
serious injury may occur.
!
Indice
Altri manuali Sonoma Griglia
