Sony CCMA-2DAR Manuale di istruzioni

910

4 5

1 2

Camera head

(MCC-1000MD)

Camera adapter

(CCMA-2DAR)

Operating Procedure

Microscope Connection Guide for the CCMA-2DAR Adapter

and the MCC-1000MD

Connecting to the Leica M525

Connection

Connect the camera cable to the camera head.

*Align the cable slot with the top of the camera head, and turn the cable ring to secure it.

Connection setup is

complete (finished state).

Connect the controller to

the adapter by pushing

inwards until it clicks;

there is no need to turn

the controller.

Insert the adapter into

the microscope (gently,

with both hands).

Attach the Leica attachment to the adapter while turning its

mount ring.

Attaching the camera head (MCC-1000MD) to the adapter.

• Align the lens mount thread of the camera head with the camera adapter connector, then turn the camera head

clockwise to secure it to the unit. At this time, please do not align the planes of the camera and the adapter forcibly.

Remove the camera head cap.

Remove the camera connector cap.Remove the front lens

cap of the camera

adapter.

Pull off the microscope

cap.

Preparation

Insert two AA batteries into the

controller.

Print the chart for adjusting the viewing

angle position onto A4-size paper.

Camera adapter with

the Leica attachment

Mount ring

1. Leica M525

2. Controller cable

3. Camera head (MCC-1000MD)

4. Controller

5. Attachment for Leica

6. Camera adapter (CCMA-2DAR)

Operating Procedure

MK20402V1OHB20JAN

123

654

1 2 3

20~30 cm

For the controller cable, slide the joint and pull it

directly out.

For the camera cable, pull it out while turning the

ring of the joint.

For the camera head, turn the main unit to

remove/attach it (make sure to disconnect the

camera cable).

Advice on Cable Disconnection

Adjusting

the Viewing

Angle Position

If iris adjustment is required, turn

the dial to adjust the iris setting.

TIPS

If the remote control does not work due

to the deterioration of battery

performance, you can use the adapter’s

FOCUS dial to adjust the focus (For

emergency purposes only; be careful

not to touch the clean field.)

While viewing the chart displayed on the

monitor, adjust the focus by holding down

the NEAR and FAR buttons on the controller.

Now use the hexagonal wrench to

adjust the up, down, left, and right

positions so that your chart

appears in the center of the

monitor.

While viewing the monitor, adjust

the rotation by using a hexagonal

wrench to loosen the screw

securing the camera adapter and

camera head, then tighten the

screw with this wrench to secure

the screw again.

While looking through the

microscope’s ocular lens, centrally

place the chart printout (your chart

for adjusting the viewing angle

position). The recommended

working distance is 20~30 cm.

Focus wrong

Focus correct

Turn on power to the MCC-1000MD,

M525 and monitor to display your

chart on the monitor.

Microscope Connection Guide for the CCMA-2DAR Adapter

and the MCC-1000MD

Connecting to the Leica M525

Support call:

Email:

Altri manuali per CCMA-2DAR

Questo manuale è adatto per i seguenti modelli

Altri manuali Sony Adattatore

Sony

Sony BKM-FW50 Manuale utente

Sony

Sony Cyber-shot DCC-L1 Manuale utente

Sony

Sony CA-TX50 Manuale utente

Sony

Sony AC U50A Manuale utente

Sony

Sony TDM-iP50 - Digital Media Port Cradle Manuale utente

Sony

Sony IM750 Manuale utente

Sony

Sony DCC-L50B Manuale utente

Sony

Sony CMA-10 Manuale utente

Sony

Sony AC-U501AD Manuale utente

Sony

Sony BKM-243HS Manuale utente

Sony

Sony BKM-227W Manuale utente

Sony

Sony VAD-HA Manuale utente

Sony

Sony CLIE PEGA-TK500 Manuale utente

Sony

Sony MSRW-D1 Manuale utente

Sony

Sony AC-LS1 Manuale utente

Sony

Sony PCG-ABA1 Series Manuale utente

Sony

Sony PCGA-BA1/A Foglio di istruzioni

Sony

Sony DCP-77 Manuale utente

Sony

Sony AC-UD10 Manuale utente

Sony

Sony MSAC-MCF1N Manuale utente

Sony

Sony QDA-EX1 Manuale utente

Sony

Sony AC-E45A - Worldwide AC Power Adaptor Manuale utente

Sony

Sony PGV-220 Manuale utente

Sony

Sony ACV-Q800 Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente