Sony GP-VPT2BT Guida di riferimento
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Use this Help Guide when you have issues or questions on how to use your Shooting Grip With Wireless Remote
Commander.
Supported camera models
Identifying the parts
Preparations
Unpacking
Inserting the battery
Pairing the unit with the mounted camera
Confirming the setting on the camera
Mounting the camera
Adjusting the tilt angle
Preventing unintentional operations
Shooting
About the camera shooting styles
1
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Supported camera models
This unit is Shooting Grip with the Bluetooth compatible wireless remote commander function (hereinafter referred to as
“this unit”).
For camera models compatible with this unit, visit the website at:
https://www.sony.net/dics/vpt2bt/
5-011-845-11(1) Copyright 2019 Sony Corporation
3
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Identifying the parts
About the built-in Bluetooth®antenna
This unit is equipped with a built-in Bluetooth antenna at the section shown in the following illustration. When you
operate this unit, keep your hand away from the section to prevent a possible Bluetooth connection failure.
Camera mounting screw1.
Flip button
Flips around the mounted camera. For details, see “Adjusting the tilt angle.”
2.
Angle adjusting button
Adjusts the angle of the grip. For details, see “Adjusting the tilt angle.”
3.
PHOTO button4.
Indicator5.
MOVIE button6.
LOCK switch
Disables the remote commander function to prevent unintentional camera operations.
7.
Zoom button8.
C1 button
Activates the function assigned to the C1 button on the camera. For details about the camera's settings, refer to the
operating instructions supplied with your camera.
9.
Adjustment wheel
Adjusts feel for changing the angle of the grip.
10.
Camera mounting wheel11.
Battery chamber lid12.
4
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Unpacking
If you find anything missing, please contact your dealer.
The number in the parentheses indicates the quantity.
Shooting Grip With Wireless Remote Commander (1)
Lithium coin cell battery (CR2032) (1)
Pouch (1)
Set of printed documentation
5-011-845-11(1) Copyright 2019 Sony Corporation
6
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Inserting the battery
Insert the supplied lithium coin cell battery (CR2032) into the battery chamber of this unit.
5-011-845-11(1) Copyright 2019 Sony Corporation
Push the tab ( ) on the battery chamber lid to the left and hold the tab, push down the other tab ( ) on
the lid, and then remove the battery chamber lid.
1
Insert the supplied lithium coin cell battery.
Insert the battery so that the + terminal is facing upward.
(+ on the battery chamber indicates the direction of the battery.)
2
Replace the battery chamber lid.
3
7
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Pairing the unit with the mounted camera
Establish a Bluetooth connection between this unit and a camera.
Before establishing a Bluetooth connection, you must pair the unit with the camera (device registration).
Note
The following is an example of the mounting procedure for Sony Interchangeable Lens Digital Cameras and Sony digital still
cameras.
Before you start pairing, make sure that the LOCK switch on this unit is NOT in the “LOCK” position.
Note
If pairing fails, the indicator on this unit flashes rapidly. If this happens, repeat the procedure all over again.
A pairing attempt times out when a certain amount of time elapses between the actions in step and step .
In the event of the following, pair this unit with the mounted camera all over again.
On the camera, select MENU → (network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
1
On the camera, select MENU → (network) → [Bluetooth Rmt Ctrl] → [On].
If the pairing screen appears on the camera's screen, proceed to step .
2
On the camera, select MENU → (network) → [Bluetooth Settings] → [Pairing].
3
On this unit, press and hold the PHOTO button ( ) and the T side of the Zoom button ( ) simultaneously
for at least 7 seconds.
4
When a confirmation message appears on the camera's screen, select [OK].
appears and pairing begins.
When pairing is complete, [Paired.] appears.
5
8
You mounted a different camera on this unit for operation. (When you replaced the camera back with the previously mounted
one, you must pair the unit with the mounted camera all over again as well.)
You reset the camera's network settings.
If this unit is kept unused while a Bluetooth connection is established, (no Bluetooth connection) may appear on the camera’s
screen.
5-011-845-11(1) Copyright 2019 Sony Corporation
9
Help Guide
Shooting Grip With Wireless Remote Commander
GP-VPT2BT
Confirming the setting on the camera
On the camera, select MENU → (network) → [Bluetooth Rmt Ctrl] and make sure that [On] is selected.
Note
You cannot use the function for linking location information with a smartphone while [Bluetooth Rmt Ctrl] is set to [On].
You cannot use an infrared remote commander while [Bluetooth Rmt Ctrl] is set to [On].
While [Bluetooth Rmt Ctrl] is set to [On], the camera will not switch to the power-saving mode. Change the setting to [Off] when
you are done using the Bluetooth remote commander.
5-011-845-11(1) Copyright 2019 Sony Corporation
10
Altri manuali per GP-VPT2BT
1
Indice
Altri manuali Sony Accessori per fotocamere
Sony
Sony MPK-F40 Manuale utente
Sony
Sony HVL-80DA Manuale utente
Sony
Sony VAD-WB Manuale utente
Sony
Sony BRS-200 Manuale utente
Sony
Sony BKP-7090 Manuale utente
Sony
Sony LSF-S58 Manuale utente
Sony
Sony FCB-IX11A Manuale utente
Sony
Sony PCK-LM14 Manuale utente
Sony
Sony VF-74CP Manuale utente
Sony
Sony VCT-550RM Manuale utente
Sony
Sony VG-B50AM Manuale utente
Sony
Sony Cyber-shot Station CSS-PC1 Manuale utente
Sony
Sony CA4000 Manuale utente
Sony
Sony XCD-V50 Manuale utente
Sony
Sony VCT-50AV Marketing s Manuale utente
Sony
Sony ADP-AMA Manuale utente
Sony
Sony AC-UP100 Manuale utente
Sony
Sony CPT-R1 Manuale utente
Sony
Sony MPK-URX100A Manuale utente
Sony
Sony VCT VCT-1500L Manuale utente
