Sony BRAVIA FW-43BZ35F Manuale utente

1INSTALLATION INSTRUCTIONS

1.1 Models covered by instruction

FW-43BZ35F

FW-49BZ35F

FW-55BZ35F

FW-65BZ35F

FW-85BZ40H

FW-75BZ40H

FW-65BZ40H

FW-55BZ40H

1.2 Ethernet connection

Use the LAN port to connect the TV to your network.

1.3 How to do a “Factory Reset”

Note: If the TV has not been set up before, the TV will power on in the” Install menu”,

shown below. The factory reset can then be skipped.

Alternative 1:

•From home menu open settings in the top right corner of the screen.

•Storage & reset – Factory reset data

oErase everything

oTV will now reboot

•Do a normal installation of the screen

Alternative 2:

•Unplug the TV AC power cord from the electrical socket.

•Simultaneously press and hold down the Power and volume Down buttons on

the TV (not on the remote), and then (while holding the buttons down) plug

the AC power cord back in. Continue to hold the buttons down until the green

LED light appears.

•It will take approximately 10-30 seconds for the LED light to turn green.

•Release the buttons after the green LED light appears.

SONY BRAVIA PROFESSIONAL

ANDROID SIGNAGE DISPLAY

INSTALLATION MANUAL

R&D 2021-02-05 Page 2 of 5

•After some time, the TV will reboot two times and the Welcome setup screen

will appear.

If the white LED light doesn't turn green within 30 seconds, start over again.

1.4 Initial Installation

1.4.1 Screen settings

•Power On TV

•Welcome: Select language

•Setup your TV with an Android phone or tablet: Skip

•Make the most of your TV (sign into Google account): Skip

•Terms of service: Accept

•Location: No

•Help improve Android performance: No

•Choose a name for your device: The one that describes the model number of the

display (i.e: FW-43BZ35F)

•Bravia Privacy Policy: scroll down to the bottom with the down arrow on remote

and select: Agree

•Specify how your TV is positioned: Table-Top stand or Wall mount, select what

applies to your TV

•Change current date and time: Change if date and time is incorrect, or else

choose Skip

•Setup Completed: Complete

•Welcome to Android TV: following is a slideshow guide. To continue press the

right arrow on your remote until you can select DONE

•Follow the General Settings described in 2.4.2

1.4.2 General Settings

To start we need to activate Pro settings

•From main TV menu: select Pro mode tool – Pro settings mode: OK

•Wait for TV to reboot

•TV should now display a blue bar in the top of the screen with the text “Pro

settings in process”

Now open settings located in the top right corner of the screen.

•To turn off sound feedback:

oSound – System sounds: turn off

•To turn off eco settings:

oPower – Eco: turn all options OFF

R&D 2021-02-05 Page 3 of 5

On your computer go to this url: https://a.dsig.tv/ and download the Android

file and place this in the root folder on a USB stick and insert into the back of

the TV.

NOTE: Do not import data if asked.

Go to the top and select Settings and then select Pro settings

•Allow Pro Mode to access photos, media and files on your device: Allow

•Allow NodeRuntimePrivilege to access photos, media and files on your device:

Allow

•Allow NodeRuntimeNormal to access photos, media and files on your device:

Allow

•Allow WebAppRuntime to access photos, media and files on your device: Allow

•In Pro settings: Install APK – select application installer file (i.e: AndroidDS.apk)

oSelect Install

oAfter installation is done select Open

The signage app should now open and display the install code

•Access the signage management portal.

•Select add screen.

•Enter the Install Code presented on the screen.

After installation is completed, unplug the USB stick.

R&D 2021-02-05 Page 4 of 5

1.4.3 IMPORTANT

To get the TV to auto-start signage application you must activate this in the

signage management portal.

When TV shows up in the signage management portal, open settings for this

screen with the settings wheel when hovering mouse over the screen.

oOpen Actions – Player setup – Android – Autostart – Enable

oA message on the screen should display showing “Enabling

app autostart”

oConfirm that this is enabled in the portal by clicking on refresh

and the second lowest field should be: Android Autostart: enabled

1.4.4 Disable Pro settings

After the TV have been connected to the Signage management portal press the HOME

button on the remote to come back to the TV main menu.

Open settings in top right corner – Pro settings – Change to normal mode: OK

•Wait for TV to reboot

The TV should not display the blue bar with “Pro settings in process” anymore.

After Reboot the signage app will start after a short while.

R&D 2021-02-05 Page 5 of 5

2NICE TO KNOW

2.1 TV software version

Use the Sony TV control and press the Home button

Select Settings in top right corner and open About.

2.2 Changing network type

Use the Sony TV control and press the Home button

Select Settings in top right corner

•Network – Network setup – Easy

oWired LAN – Connected successfully: OK

oWi-Fi – Connect by scan list

Select SSID

Enter password

OK

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sony Monitor

Sony

Sony GDM-400PST Manuale utente

Sony

Sony Multiscan300sf CPD-300SFT5 Manuale utente

Sony

Sony SDM-S75FS Manuale utente

Sony

Sony SDM-HS95B Manuale utente

Sony

Sony LMD1751WCC Manuale utente

Sony

Sony GDM-C520 MACINTOSH users Manuale utente

Sony

Sony SDM-E96D Manuale utente

Sony

Sony GDM-5403 Manuale utente

Sony

Sony LMD-150MD Manuale utente

Sony

Sony Multiscan CPD-1430 Manuale utente

Sony

Sony Trinitron BVM-A32E1WU Manuale utente

Sony

Sony SDM-S95AB Manuale utente

Sony

Sony KLH-W32 Manuale utente

Sony

Sony SDM-S81 Manuale utente

Sony

Sony FWD-S55H2 Manuale utente

Sony

Sony SDM-V72W Manuale utente

Sony

Sony Multiscan SDM-N50R Manuale utente

Sony

Sony LiveView mn800 Manuale utente

Sony

Sony FW-85BZ40H Manuale utente

Sony

Sony Trinitron CPD-200SX Manuale utente

Sony

Sony SDM-HS94 Manuale utente

Sony

Sony SDM-X75FB Manuale utente

Sony

Sony MFM-HT75W Manuale utente

Sony

Sony PVM-741 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione