Sony CMT-SP55MD Manuale utente
Operating Instructions
Micro Hi-Fi
Component
System
4-230-234-13(1)
©2000 Sony Corporation
CMT-SP55MD
2
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.
The following caution label is located inside of the
unit.
US and foreign patents licensed from Dolby
Laboratories.
Table of Contents
Getting Started
Step 1: Hooking up the system ................ 4
Step 2: Setting the time ............................ 8
The CD Player
Playing a CD ............................................. 9
Playing CD tracks in random order
— Shuffle Play ................................. 10
Programming CD tracks
— Programme Play .......................... 11
Playing CD tracks repeatedly
— Repeat Play.................................. 12
Using the CD display .............................. 13
Labelling a CD — Disc Memo ............... 14
Checking Disc Memo information.......... 16
The MD Deck — Play
Playing an MD ........................................ 17
Playing MD tracks in random order
— Shuffle Play ................................. 18
Programming MD tracks
— Programme Play .......................... 19
Playing MD tracks repeatedly
— Repeat Play.................................. 20
Using the MD display ............................. 21
3
The MD Deck — Recording
Before you start recording....................... 22
Recording a CD on an MD
— CD-MD Synchro Recording........ 23
Recording your favourite CD tracks
on an MD
— CD-MD Synchro Recording........ 24
Recording your favourite portions
on an MD
— Manual Recording ....................... 26
Recording from the radio
— Manual Recording ....................... 27
Making a space between tracks
3 seconds long
— Smart Space ................................. 28
Starting recording with 6 seconds of
prestored audio data
— Time Machine Recording ............ 29
Marking track numbers ........................... 31
Adjusting the recording level .................. 32
Monaural recording ................................. 33
The MD Deck — Editing
Before you start editing........................... 35
Labelling an MD — Name Function ...... 36
Erasing recordings — Erase Function .... 38
Moving recorded tracks
— Move Function ............................ 41
Dividing recorded tracks
— Divide Function ........................... 42
Combining recorded tracks
— Combine Function ....................... 44
Undoing the last edit
— Undo Function ............................. 45
Tuner
Presetting radio stations .......................... 46
Listening to the radio
— Preset Tuning............................... 48
Labelling the preset stations
— Station Name ............................... 49
Using the Radio Data System (RDS)* .... 51
Timer/Other Features
Falling asleep to music
— Sleep Timer ................................. 51
Waking up to music
— Daily Timer ................................. 52
Timer recording radio programmes ........ 54
Adjusting the sound ................................ 56
Optional Components
Connecting a digital component ............. 57
Connecting an analogue component ....... 58
Connecting external aerials ..................... 60
Additional Information
Precautions .............................................. 61
System limitations of MDs ..................... 63
Troubleshooting ...................................... 64
Self-diagnosis Display ............................ 67
Messages ................................................. 68
Specifications .......................................... 69
Index ........................................................ 71
* European model only
4
Getting Started
Step 1: Hooking up the system
Perform the following procedure 1to 7to hook up your system using the supplied cords and
accessories.
Note
Be sure to hook up the system with the mains lead unplugged from the mains. Hooking up the system with the
mains lead plugged in may cause the system to malfunction.
AM loop aerial
Right
speaker
CMT-SP55MD
rear panel
FM aerial
Left
speaker
Tuner
Amplifier
CD player
MD deck
5
Getting Started
Preparation
Stack the components vertically in the order
shown in the illustration below.
1Connect the supplied digital cable to
DIGITAL OPTICAL OUT on the CD
player and DIGITAL OPTICAL CD
IN 1 on the MD deck.
Take the caps off the connectors, then insert
the plugs until they click into place.
IN 2
CD
AUX
DIGITAL OPTICAL
DIGITAL
OPTICAL
SYSTEM CONTROL 3
IN 1
SYSTEM CONTROL 2
OUT
2Connect the system cables to the
SYSTEM CONTROL connectors on
each component.
Connect the tuner and
amplifier
Connect the system cable on the amplifier to
the SYSTEM CONTROL 1 (white)
connector on the tuner.
SYSTEM CONTROL 1
SYSTEM CONTROL 1
Connect the tuner and CD
player
Connect the supplied system cable to the
SYSTEM CONTROL 2 (black) connectors
on the tuner and on the CD player.
Connect the tuner and MD
deck
Connect the supplied system cable to the
SYSTEM CONTROL 3 (red) connectors on
the tuner and on the MD deck.
Notes
• The system cable is used to send signals and
electricity between the components for
interlinked operation.
Be sure to insert the connector horizontally
until it clicks into place. Otherwise the system
will not operate correctly.
• Keep the system cable away from the aerials
to prevent noise or malfunction.
continued
Tuner
Amplifier
CD player
MD deck
6
3Connect the speakers.
Connect the speaker cords to the SPEAKER
terminals on the amplifier and to the
terminals on the speakers as shown below.
–
R +
L +
–
The supplied speakers can be used as either
the left or right speakers.
Place the speaker connected to the
SPEAKER R terminals on the right side, and
the speaker connected to the SPEAKER L
terminals on the left side of the system.
L (left) R (right)
Clear (#)
Notes
•Keep the speaker cords away from the aerials
to prevent noise.
•Be sure to connect both left and right
speakers. Otherwise, no sound will be
produced.
Insert this
portion
AM loop aerial
5Connect the FM aerial.
Extend the FM aerial horizontally.
Jack type A
Jack type B
Step 1: Hooking up the system
(continued)
4Connect the AM aerial.
Set up the AM loop aerial, then connect it.
AM
Red line (3)
7
Getting Started
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes
• If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
• Be sure to insert the batteries in correct direction.
• Do not mix a new battery with an old one.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
and replace all the batteries with new ones.
Adjusting the contrast of the
characters in the display
All information for each component appears in the
display on the tuner. While holding down
DISPLAY, press TUNING + or – to adjust the
contrast of the displayed characters. You can
finely adjust the contrast in 7 steps from –3 to +3.
Adjusting the brightness of
the display back light
Press DISPLAY in standby mode to light up the
display back light. While the display is lit, press
TUNING + or – to adjust the back light
brightness.
6For models with a voltage selector, set
the VOLTAGE SELECTOR on the rear
of the amplifier to the position of your
local mains voltage.
220V-240V
110V-120V
VOLTAGE SELECTOR
7Connect the mains lead to the mains.
Arranging the components side
by side
Once you have finished the connections, you can
rearrange the components as desired.
8
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
Set the time before turning on the system.
`/1
1
2,3
2,32,3
1Press CLOCK/TIMER SET while the
system is off.
The hour indication flashes.
2Press .or >to set the hour, then
press ENTER/YES.
The minute indication flashes.
3Press .or >to set the minute,
then press ENTER/YES.
The clock starts.
If you made a mistake
Start over from step 1.
To change the preset time
You can change the preset time while the system
is on.
1Press CLOCK/TIMER SET.
2Press .or >repeatedly until “SET
CLOCK” appears, then press ENTER/YES.
3Repeat steps 2 and 3.
Tips
• The built-in clock shows the time in the display
while the system is off. If you press DISPLAY at
this time, the display back light lights up, making
the clock easier to see.
• The upper dot of the colon flashes for the first 30
seconds, and the lower dot flashes for the last 30
seconds of each minute.
Getting Started/The CD Player
9
The CD Player
Playing a CD
To turn on the system, press ?/1 (power).
?/1 (power)
2Press Hon the CD player.
Play starts.
Track number Playing time
To Do this
Stop play Press son the CD player.
Pause Press Son the CD player.
Press Sagain or Hon the CD
player to resume play.
Select a track Press lm or ML on the
CD player repeatedly.
2
1
1Press Aon the CD player and place a
CD on the disc tray.
With the label side up.
When you play a CD single (8 cm CD),
place it on the inner circle of the tray.
Press Aagain to close the disc tray.
Find a point in
a track Keep pressing lm or
ML on the CD player during
play and release it at the desired
point.
Remove the CD Press Aon the CD player.
Adjust the
volume Turn VOLUME.
Tip
You can switch from another source to the CD player
and start playing a CD just by pressing Hon the CD
player (Automatic Source Selection).
10
Playing CD tracks in
random order — Shuffle Play
You can play all the tracks on a CD in random
order.
`/1
2
1
3
1Press CD to switch the function to CD.
2Press PLAY MODE repeatedly until
“SHUFFLE” appears.
3Press N.
Shuffle Play starts.
To cancel Shuffle Play
Press PLAY MODE repeatedly until “SHUFFLE”
and “PROGRAM” disappear.
Tips
• You can start Shuffle Play during normal play by
displaying “SHUFFLE”. All the tracks are played in
random order.
• To skip a track, press >. Press .to go back
to the beginning of the current track. However, you
cannot go back to the previous track.
Indice
Altri manuali Sony Impianto stereo
Sony
Sony MEX-M100BT Manuale utente
Sony
Sony MHC-GRX990 Manuale utente
Sony
Sony ZS-S50CP Manuale utente
Sony
Sony LBT-D107 Manuale utente
Sony
Sony HCD-MD313 Manuale utente
Sony
Sony MHC-GX90D - Dvd Shelf System Manuale utente
Sony
Sony MHC-EC69i/C2 Manuale utente
Sony
Sony SRS-X33 Guida di riferimento
Sony
Sony CMT-SBT20B Manuale utente
Sony
Sony BDV-N995W Manuale utente
Sony
Sony GTK-XB5 Manuale utente
Sony
Sony ZS-X1 - Cd Boombox Manuale utente
Sony
Sony HCD-XG100AV Manuale utente
Sony
Sony XO-D301 Manuale utente
Sony
Sony CMT-CPZ2 Manuale utente
Sony
Sony SRS-X11 Guida utente
Sony
Sony 3-293-639-11(1) Manuale utente
Sony
Sony HCD-ZT4 Manuale utente
Sony
Sony CHC-TB10 Manuale utente
Sony
Sony FH-211W Manuale utente
