Sony IJ1001SNBT Manuale utente
Energy Storage System “IJ1001SNBT”
38
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Copyright Sony Energy Devices Corporation
Insert the antenna cable Top cover
Front
Energy Storage System “IJ1001SNBT”
39
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Copyright Sony Energy Devices Corporation
Screw：⑥Screw（M4×10㎜Black）×4pcs
Rear
Energy Storage System “IJ1001SNBT”
40
Set the outer enclosure to the wall
Make a hole for conduit inside the bellow area.
Copyright Sony Energy Devices Corporation
177.8㎜(7in)25.4㎜(1in)
25.4㎜(1in) 304.8㎜(12in)
Hole(1.06in)
Energy Storage System “IJ1001SNBT”
41
Set the outer enclosure to the wall
Fixing the outer enclosure to the wall 4 bolts.
Copyright Sony Energy Devices Corporation
Ground
Keep the distance 30cm or more
From the ground
Bolt :
For Wood Wall Diameter 3/8 inch
Length : 3-1/4 inch
For Concrete Diameter 3/8 inch
Length 3 inch
Energy Storage System “IJ1001SNBT”
42
Install the energy storage box into the outer enclosure
Install the energy storage server to the outer enclosure.
Copyright Sony Energy Devices Corporation
Install
Energy Storage System “IJ1001SNBT”
43
Install the energy storage box into the outer enclosure
Wiring 8 position bellow.
Copyright Sony Energy Devices Corporation
Completed photo
Energy Storage System “IJ1001SNBT”
44
Install the energy storage box into the outer enclosure
Wiring ground terminal using the grounding cable from outer enclosure to the energy storage server.
Copyright Sony Energy Devices Corporation
Ground terminal
Completed photo
Energy Storage System “IJ1001SNBT”
45
Install the energy storage box into the outer enclosure
Check the circuit protector.
Copyright Sony Energy Devices Corporation
Confirm the circuit protector is off
OFF
OFF
Energy Storage System “IJ1001SNBT”
46
Install the energy storage box into the outer enclosure
Insert the fuse bar.
Copyright Sony Energy Devices Corporation
Fuse bar
Screw：⑦Screw（M3×8㎜Black）×2pcs
Energy Storage System “IJ1001SNBT”
47
Install the energy storage box into the outer enclosure
Insert the front panel of the server.
Copyright Sony Energy Devices Corporation
Front panel
Altri manuali Sony Magazzinaggio
Sony
Sony SAITe1300-F Manuale utente
Sony
Sony HD-EG5U Manuale utente
Sony
Sony MRW68E-D1 Istruzioni per il montaggio
Sony
Sony HD-EG5 Manuale utente
Sony
Sony MSX-M1GN Manuale utente
Sony
Sony ODS-D77F Manuale utente
Sony
Sony USM16SA3 Manuale utente
Sony
Sony MSH-128 Manuale utente
Sony
Sony SCPH-4000 Manuale utente
Sony
Sony USM512H Manuale utente
Sony
Sony SF Series Manuale utente
Sony
Sony MSX-M4GS Manuale utente
Sony
Sony Memory Stick MSA-32A Manuale utente
Sony
Sony MSX-M1GS Operating Instructions (Memory Stick... Manuale utente
Sony
Sony RMO-S561 Manuale utente
Sony
Sony SLW-MG2 Manuale utente
Sony
Sony SDX-D420V Series Manuale utente
Sony
Sony SF16UX Manuale utente
Sony
Sony SCPH-20401 Manuale utente
Sony
Sony VGP-UHDM25 Manuale utente
