Soundavo WS66I Manuale utente
WS66I
OWNERS MANUAL
6 Source / 6 Zone
Matrix Amplifier with Streamers
Audio Distribution Network Controller
2
INTRODUCTION
FEATURE
*High efficiency more than 85% Class D amplification.
*6 Line input sources, including 2 Audio Streamers (Input 3, 4).
*USB ports for playing music files from USB Flash Drive (Input 3, 4).
*Each zone Stereo/Mono output selectable.
*Enable control over Ethernet.
*Support Control APP.
*PRE-AMP output on Zone1~6.
*Built-in IR receiver & IR remote controller for Source
select/Volume/Treble/Bass.
*12V DC trigger output to external device when the system is power on.
*12V DC mute trigger input from the external devices.
*RJ45 Ethernet port for the wired connection to the local network.
*Another RJ45 Ethernet expansion port for connecting with smart TV or other
device.
*RS-232 port allows 2-way communication with the Home Automation system.
*Expandable up to 18 Zones by additional 2 units.
*6 LEDs for 6 zones Power On, Standby and Mute.
*Built in IR emitter.
*AC 115V / 230V input power switchable.
3
The WS66I matrix amplifier home audio system brings you the advanced
Generation Dtechnology, it is afunctional, easy-to-install, highly compatible,
expandable and used-friendly audio distribution system. With few simple
steps to install, it provides up to 50W x2power by class Damplifier and
distribute at most to 18 zones which all can be controlled by APP, or option
keypads &IR remote controller
Simply connecting the WS66I to the local Ethernet network, it let you access a
wide variety of music from the built-in WiFi streaming services or stored on
the smartphone. Two USB ports on the front panel for playing music files from
USB storage devices. An Optical digital input to manage the sound of aflat
screen or aCD player to have high resolution of sound quality in each zone.
The overall distribution system including package device is easy-to-install, so
every audiophile in every zone can use IR controller or keypads as option to
enjoy the powerful audio. High functionality and performance bring you
musical enjoyment just the way you want it.
*Each zone provides 50W x2(@ 4Ohm) output power.
SPECIFICATION
Output Power:
Output Power:
Output Power:
S/N:
THD:
Frequency Response:
Input Impedance:
Input Sensitivity:
Protection Function:
System on Voltage:
External Mute Voltage:
Power Supply:
Output Connection:
Input Connection:
Sampling Rate(Streamer):
Audio Format(USB):
Streamer Support:
USB type:
Network:
Dimension:
Weight:
25W x 2 per zone (at 8Ω)
50W x 2 per zone (at 4Ω)
100W per zone (Bridged at 8Ω)
>85dB A WTD
<0.1%
20Hz-20KHz
RJ45, Standard 10/100Mb
430mm x 89mm x 416 mm (WxHxD)
12KG
1 2 3
FRONT PANEL
4
>47 KOhm
250 mV
Overload, Short Circuit
DC +12V
DC +12V
AC115V/60Hz, 230V/50Hz
4P Terminal Block
Input 1, 2-RCA Jacks
Input 3, 4–Streamers or USB ports
Input 5–3.5mm Jack
Input 6–S/PDIF, 3.5mm Jack
Up to 24Bit/192KHz with popular audio format
MP3/WMA/AAC/AAC+/ALAC/FLAC/APE/WAV
DLNA, AirPlay
USB2.0, Support up to 64G.
1. Power ON/OFF/ STANDBY
Depress the power button to turn
on the system. Press it again to
release the latch and power the
unit off. Note that even the Master
Controller is powered on, each
zone will remain in Standby mode
until the zone keypad is activated.
1 3 5 4 10 12
13 14 15 17
11 16
2 6 7 8 9
REAR PANEL
1. PRE-AMP OUTPUT
Stereo Line level output on each zone.
Connect to additional amplifier with higher
output, or powered Sub-woofers.
2.SPEAKER OUTPUTS
6 x Removable terminal block connectors
on each zone.
3.STEREO/BRIDGE SWITCH
4.SOURCE INPUTS
6 Stereo Analog/Digital inputs.
Two Wi-Fi Streamers are input 3 and 4.
5.Input 1/PA
Paging capability for Input 1 to broadcast
to all zones when 12VDC is applied to the
PA - IN jack.
6.STATUS
When the zone is activated, the corresponding
jack will output 12VDC to trigger other device.
7.IR EMITTERS
IR Outputs 6 routed & 1 common
8.PA-IN
12VDC paging trigger input
9.EXT. MUTE/CONTROL OUT
Mute the entire system with the 12VDC MUTE IN.
Use the12VDC CONTROL OUT to trigger other
equipment
10.EXPANSION IN/OUT PORT
Expandable to 18 zones with 3 x Multi-zone
Controller systems.
11.ETHERNET PORTS
Dual LAN ports, one connects to the LAN port of
local router. Another connects to network TV or
other device which requires Ethernet.
2. Standby/Zone ON LED
These six LEDs illuminate to indicate the
status of each zone.
3. USB Port 3/4
Two USB ports correspond to the built-in
Wi-Fi Streamers, as source input 3 and 4.
Playing audio source from USB Flash
Drives.
5
Blue: In Standby mode. White: In Activate
mode. Blue/White: In Mute mode.
Each zone provides 2x50W @4Ohm
or 100W @8Ohm in bridge mode.
12.ETHERNET/RS232 SWITCH
ETHERNET: When the amplifier connects to
Ethernet.
RS232: When the amplifier control by PC or
Control Device via RS-232.
13.AGC
Automatic Gain Control, brings low level up
to a present-level.
14.MASTER/SLAVE SWITCH
1. Numeric LED Display: The digital LED
display show the number of the source
device, as well as the volume, treble,
and bass level.
2. VOL. LED: When illuminated, this LED
indicates that the Numeric LED is
displaying the volume level. Use the Up
and Down buttons to increase and
decrease the volume level.
3. Source LED: When illuminated, this
LED indicates that the Numeric LED is
displaying the source selection.
4. EXT. LED: When illuminated, this LED
indicates that the Mute function is
enabled or that a PA broadcast is in
progress
5. Treble Mode LED: When illuminated,
this LED indicates that the Numeric
LED is displaying the treble level. Use
the Up and Down buttons to increase
and decrease the treble level.
Set the unit ID when connecting multi
Controller systems
15.KEYPAD
RJ-45 jack Connects to the keypad hub
for 6 keypads.
16.VOLTAGE SELECT
Please set to correctly input voltage
before turn on the amplifier.
17.AC INPUT
1
2
10
9
7
3
6. Bass Mode LED: When illuminated, this LED indicates that the Numeric LED is displaying the bass
level. Use the Up and Down buttons to increase and decrease the bass level.
7. Infrared (IR) receiver: The IR “eye” receiver the infrared remote control signals. Signals sent from the
include remote control are used to control the wall plate keypad.
8. Up Button: Use this button to increase the volume, treble, or bass levels (depending on which mode
is selected). If the zone is muted, pressing this button will unmute it.
9. Down Button: Use this button to decrease the volume, treble, or bass levels (depending on which
mode is selected). If the zone is muted, pressing this button will unmute it.
10. Previous Source Button: Use this button to cycle backwards through the list of available source.
For example, if source 3 is currently selected, pressing this button will change to source 2.
11. Next Source Button: Use this button to cycle forwards through the list of available source. For
example, if source 3 is currently selected, pressing this button will change to source 4.
12. Select-Power Button: Press and hold this button for about 3 seconds to turn the zone on or off.
When the zone is on, pressing the button will cycle through the availale adjustment modes.
6
5
6
4
8
12
11
1
7
2
5
6
3
4
3
7
WS66I
WS66I
RCA 3.5mm Stereo
8
The WS66I can work with speakers that are 4-8 Ohm. There are 9 two
modes that can be set for different setups: Stereo or Bridge. An 8 Ohm
speaker can only be used when in Bridge mode. To choose between modes,
use the mode switch to determine modes for each zone (Number 2 Panel
Descriptions, page 5)
STEREO MODE BRIDGE MODE
and network.
9
6
6
ZONE-1
ON ON OFF
1 2 3
ZONE-2
ON ONOFF
1 2 3
ZONE-3
ON OFFOFF
1 2 3
ZONE-4
ONONOFF
1 2 3
ZONE-5
ON OFFOFF
1 2 3
ZONE-6
ONOFFOFF
1 2 3
10
(Optional)
The WS66I can be controled via 6POE enabled keypads (optional). This allows for
source control from each specific zone as well as IR routing to the
appropriate source devices once selected. The WS66I also comes with
optional hub that allows for all 6-keypads to be connected to the amp via
Cat5e/6.
Altri manuali per WS66I
1
Indice
Altri manuali Soundavo Amplificatore
Soundavo
Soundavo PSB-1000 DSP Manuale utente
Soundavo
Soundavo PSA-50H Manuale utente
Soundavo
Soundavo PSA-1250V Manuale utente
Soundavo
Soundavo CSA-60 Manuale utente
Soundavo
Soundavo NSA-250 Manuale utente
Soundavo
Soundavo PSA-4600 Manuale utente
Soundavo
Soundavo WS66I Manuale utente
Soundavo
Soundavo M66-EXT Manuale utente
Soundavo
Soundavo MZ-1650S Manuale utente
Soundavo
Soundavo PSB-300 Manuale utente
