SOUNDMASTER DAB2035 Manuale utente

DAB2035

DEUTSCH

NEDERLANDS

ENGLISH ESPAÑOL

FRANÇAIS PORTUGUÊS

DAB2035 operating instruction of English

DAB2035 PLL FM Kitchen Radio

1 General Description

DAB / FM band

provide radio station name & automatic clock up-date

An electronic module for digital tuning radio

Precise crystal is used for system operation

Real time clock display with day-flag

12/24 Hour clock display

Built in calendar with auto leap year handling within 2000-2099

4 mode dual alarms can be set to daily, weekday, week-end and daily independently

Alarm output can be set to DAB, FM or Buzzer sound.

10 SDA (Special Date Alert)

provide 10 preset for cooking timer (1 minute to 23:59)

AMS function (Automatic Memory System)

20 preset radio station for user favorite

Automatic/Manual search Up/Down features are provided

Electronic Volume Control (16 level )

Back light with high-low dimmer

A.O.T (Auto Off Timer) function

Auto standby after 4 hours when user no press any key.

Technical Data

Rated Voltage : DC 5.5V 2A

Power consumption : max. 7W

Radio Frequency range:

FM 87.50MHz – 108.00MHz 50KHz/step

DAB 47.936MHz ~ 239.200MHz 1.712MHz/step

℃Operating temperature: 5 ~ 35

Battery for data retention : 1 x 3V Type CR2032

1 - 9

DAB2035 operating instruction of English

2 Operating Components

1. Power Turn on /off the unit

2. Down ▼ Tuning down / Seeking down

3. Up ▲ Tuning up /Seeking up

4. FUNC/Lock Switch DAB / FM band & key-lock

5. Auto Scan Scan

6. Info Show information of station

7. Menu Enter Setting mode / Exit Setting

8. Preset Enter preset setting or select mode

9. Select Enter or Confirm

10. AOT Start AOT function or Setting timer for AOT

11. Timer Enter Cooking timer mode or start / pause cooking timer

12. Vol - /Al2 Decrease volume or review alarm 2

13. Vol /Al1 Increase volume or review alarm 1

14. Display

15. Mounting Plate

16. Antenna socket Connection socket for DVB-T antenna

17. DC-Socket Current connection socket(5.5V) for power adapter

18. Spacer For under-cabinet installation

19. Switching Adapter

2 - 9

ANTENNA

DAB2035 operating instruction of English

3 The default of device

When unit is powered up first time, the date and clock are defaulted to 00:00 Sunday 01- 01- 2012 .

The alarms are defaulted to 0:00,

The radio is switched off

It then switches to auto-run mode

The energy saving is OFF.

4 How to setup device

When Auto-Run Mode, Press <MENU> once go to setting mode.

The bottom of display screen is as follows:

S e t M e n u

< S e t C l o c k >

Use <UP> or <DOWN> go to different mode sequentially

Auto-run Mode with Clock and Date display

1. Set the Clock

2. Set the Calendar

3. Set the SDA

4. Set 12/24 hour

5. Set alarm

6. Set Dimmer

7. Set Energy Saving

4.1 et the clock

Press <UP> or <DOWN> to select 'Set Clock' when set menu mode

Press <Select> to enter Set Clock

The bottom of display screen is as follows:

S e t M i n u t e

< 0 0 :0 0 >

Press <UP> or <DOWN> to Set value of minutes.

Press <Select> to Confirm minute Set and enter set hour mode

The bottom of display screen is as follows:

S e t H o u r

< 0 0 :0 0 >

Press <UP> or <DOWN> to Set value of hours.

Press <Select> to Confirm hour Set and return to set menu.

4.2 et the calendar

Press <UP> or <DOWN> to select 'Set Calendar' when set menu mode.

3 - 9

DAB2035 operating instruction of English

Press <Select> to enter Set calendar.

The bottom of display screen is as follows:

S e t D a t e

< 0 1 -0 1 -2 0 1 2 >

Press <UP> or <DOWN> to Set value of dates.

Press <Select> to Confirm date set and enter set month mode.

The bottom of display screen is as follows:

S e t M o n t h

< 0 1 - 0 1 -2 0 1 2 >

Press <UP> or <DOWN> to Set value of months.

Press <Select> to Confirm month set and enter set year mode

The bottom of display screen is as follows:

S e t Y e a r

< 0 1 - 0 1 -2 0 1 2 >

Press

> or <

DOWN

to Set value of years.

Press <Select> to Confirm year set and return to set menu.

4.3 et the DA

Press

> or <

DOWN

to Set SDA when set menu mode.

Press <Select

to enter Set SDA.

There are 10 SDA .

The bottom of display screen is as follows:

S e t S D A

< S D A 1 >

Press

> or <

DOWN

to select number of SDA.

Press <Select> to Confirm user select and enter set the SDA of user selected.

The bottom of display screen is as follows:

S e t S D A 0 1 D a t e

< 0 1 - 0 1 -2 0 1 2 >

Press

> or <

DOWN

to Set value of date.

Press <Select> to Confirm date and enter set month mode.

The bottom of display screen is as follows:

S e t S D A 0 1 M o n t h

< 0 1 - 0 1 -2 0 1 2 >

Press <UP> or <DOWN> to Set value of month.

Press <Select> to Confirm month and enter set year mode.

The bottom of display screen is as follows:

S e t S D A 0 1 Y e a r

< 0 1 - 0 1 -2 0 1 2 >

Press

> or <

DOWN

to Set value of year.

Press <Select> to Confirm year and return to set menu.

4.4 Set 12/24 hour format

4 - 9

DAB2035 operating instruction of English

Press <UP> or <DOWN> to select 12/24 hour format when set menu mode.

Press <Select> to enter set 12/24 hour format.

The bottom of display screen is as follows:

S e t 1 2 / 2 4 H o u r

< 2 4 H o u r >

Press <UP> or <DOWN> to select 12 or hour format.

Press <Select> to Confirm select and return to set menu.

4.5 et the alarm

Press <UP> or <DOWN> to select 'Set Alarm' when set menu mode.

Press <Select> to enter set alarm.

The bottom of display screen is as follows:

S e t A l a r m

< S e t A l a r m 1 >

Press <UP> or <DOWN> to select number of alarm.

Press <Select> to Confirm user select and enter set the alarm of user selected.

The bottom of display screen is as follows:

S e t M i n u t e

< 0 0 :0 0 >

Press <UP> or <DOWN> to Set value of minute for alarm.

Press <Select> to Confirm minute and enter set hour mode.

The bottom of display screen is as follows:

S e t H o u r

< 0 0 :0 0 >

Press <UP> or <DOWN> to Set value of hour for alarm.

Press <Select> to Confirm hour and enter set output mode.

The bottom of display screen is as follows:

S e t O u t p u t

< A l a r m 1 D i s a b l e >

there are four kinds of choices, it is respectively:

Table 1:

Kinds Means

Disable Alarm is disable (default)

DAB DAB sound for alarm active

FM FM sound for alarm active

Buzzer Buzzer sound for alarm active

Press <UP> or <DOWN> to select the kind.

Press <Select> to Confirm the select and enter set days.

The bottom of display screen is as follows:

S e t D a y s

< A l a r m 1 D a i l y >

There are ten kinds of choices, it is respectively:

5 - 9

DAB2035 operating instruction of English

Table 2:

Kinds Means

Daily Alarm work in every day

Weekday Alarm work in weekday

Weekend Alarm work in weekend

Sun,Mon .. Sat Alarm work in one day of week

Press <UP> or <DOWN> to select the kind.

Press <Select> to Confirm the select and return to set menu.

4.6 Set Dimmer

Press <UP> or <DOWN> to select 'Set Dimmer' when set menu mode.

Press <Select> to enter set dimmer.

The bottom of display screen is as follows:

S e t D i m m e r

< L o w >

Press <UP> or <DOWN> to select Low or High. Default is Low.

Press <Select> to Confirm select and return to set menu.

4.7 et energy saving

Press <UP> or <DOWN> to select 'energy saving' when set menu mode.

Press <Select> to enter set energy saving.

The bottom of display screen is as follows:

E n e r g r S a v i n g

< O f f >

Press <UP> or <DOWN> to select On or Off. Default is Off.

Press <Select> to Confirm select and return to set menu.

5 How to using device

5 1 Using the radio

5 1 1 Radio on/off and band select

Press <Power> once to turn on the radio.

Press <Power> again to turn off the radio.

Press <FUNC> to select DAB or FM

5 1 2 Electronic Volume Control

Press <VOL+ / AL1> once, to increase speaker volume by one step. Hold for continually.

Press <VOL- / AL2> once, to decrease speaker volume by one step. Hold for continually.

5 1 3 Using DAB band

When DAB is first time, Automatic Scan function will start automatically and "Scanning 0" on LCD.

5 1 3 1 Select DAB station

Press <UP> or <DOWN>once to select DAB station list.

Press <Select> once to confirm and tune to the station.

5 1 3 2 Store station into preset

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

6 - 9

DAB2035 operating instruction of English

Press and hold <Select> to store value of timer into The current position.

5 1 3 3 Recall the preset

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

Press <Select> to Confirm select and recall the frequency.

5 1 3 4 AMS using

Press and hold <auto-scan> for 2 seconds to active AMS mode.

In this mode, the radio will automatically scan the radio station and store the station that had been

scanned until scan up all the frequency or stored all the memory station, it will exit automatically.

5 1 3 5 Review information of station

Press <info> to review information of station.

There are eight kinds of choices, it is respectively:

a. Station time

b. Station frequency and block number

c. Data rate

d. Station RSSI

e. Signal error Rate

f. DLS (Scrolling text)

g. Program type

h. Station name

5 1 4 Using FM band

5 1 4 1 Search Up/Down

When the radio is ON, press <UP> once to change the receiving frequency up by 1 step

Press <DOWN> once to change the receiving frequency down by 1 step.

Press and hold <UP> to search the next radio station by moving the receiving frequency up.

Press and hold <DOWN> to search the next radio station by moving the receiving frequency down.

5 1 4 2 store station into preset

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

Press and hold <Select> to store value of timer into The current position.

5 1 4 3 Recall the preset

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

Press <Select> to Confirm select and recall the frequency.

5 1 4 4 AMS using

Press and hold <auto-scan> for 2 seconds to active AMS mode.

In this mode, the radio will automatically scan the radio station and store the station that had been

scanned until scan up all the frequency or stored all the memory station, it will exit automatically.

Review station of AMS store.

a. Press and hold <Preset> to enter select list of AMS store mode.

b. Press <Up> or <Down> to select station.

c. Press <Select> to Confirm select and tune to new frequency.

5 1 4 5 Set stereo On/Off

Press <Menu> once to 'FM set menu' mode.

Press <UP> or <DOWN> to select 'Audio setting'.

Press <Select> Confirm select and enter 'Audio setting' set mode.

7 - 9

DAB2035 operating instruction of English

Press <Up> or <DOWN> to select set.

Press <Select> Confirm and return to FM set menu mode.

5.1.4.6 Review information of station

Press <info> to review information of station.

There are four kinds of choices, it is respectively:

a. Station time

b. Station text

c. Station Program type

d. Station RSSI

5.2 using t e AOT

When radio is on, press the <AOT> key once, the LCD displays “AOT Setting 90”. If radio is off, will turn on

the radio.

Press <AOT> once to change the time down by 5 minutes, press and hold <AOT> to change the setting in fast

mode.

Press <AOT> once to review the current AOT timer, when AOT is active.

When the time is count down over, it will turn off the radio automatically.

Note : When no key has been pressed for 15 seconds, the system exit AOT timer display mode, but the AOT timer

is run at background.

5.3 Using t e cooking timer

5.3.1 quick start cooking timer

Press <Timer> once to enter the cooking timer mode.

Press <Up> or <Down> to select value of timer in history list.

Press <Timer> again to start cooking timer.

5.3.2 set value of cooking timer

Press <Menu> once enter set minute of timer when the cooking timer mode

Press <Up> or <Down> to change value of minute.

Press <Select> to Confirm minute and enter set hour of timer.

Press <Up> or <Down> to change value of hour.

Press <Select> to Confirm hour.

Press <Timer> once to start cooking timer.

5.3.3 Cooking Timer Value Preset

There are 10 preset Cooking timer

5.3.3.1 Store value into Preset

Refer to 5.1.2 set value

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

Press and hold <Select> to store value of timer into The current position.

5.3.3.2 Recall t e preset

Press <Preset> once to select position of preset mode.

Press <Up> or <Down> to change position.

Press <Select> to Confirm select and recall the value.

5.3.4 Cancel Cooking Timer

Press and hold <Timer> to cancel the cooking timer.

Note : When no key has been pressed for 15 seconds, the system exit cooking timer display mode, but the cooking

timer is run at background.

8 - 9

DAB2035 operating instruction of English

5.4 Quick review alarm setting

Press <VOL+ / AL1> once to review alarm 1 setting.

Press <VOL- / AL2> once, to review alarm 2 setting.

Note : When no key has been pressed for 15 seconds, the system return to auto run mode.

5.5 W en SDA is active

When the date/month/year matches with the SDA which has been enable, alert becomes active.

As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, cancel other & The “SDA is Coming”

goes on LCD display

The beep will sound ever hour for 10 minutes until 23:00

Press any key to start its corresponding function and the SDA will be terminate

5.6 W en alarm is active

When the real time clock matches with the alarm which has been enabled, alarm becomes active.

As the alarm becomes active, Other function, if exists, is terminated immediately.

If Beep sound alarm is selected,

a) Sound of beep toggles at the Speaker

b) The duration of alarm is 10 minutes

If FM is selected,

a) Radio On and turn to FM band

b) The duration of the alarm is 10 minutes

If DAB is selected,

a) Radio On and turn to DAB band

The duration of the alarm is 10 minutes

Press any key to terminate the currently active alarm.

9 - 9

Altri manuali per DAB2035

Indice

Altri manuali SOUNDMASTER Impianto stereo

SOUNDMASTER

SOUNDMASTER 4220USB Manuale utente

SOUNDMASTER

SOUNDMASTER MCD5500 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD370SI Manuale utente

SOUNDMASTER

SOUNDMASTER MCD 4500USB Manuale utente

SOUNDMASTER

SOUNDMASTER MCD-9500 Manuale utente

SOUNDMASTER

SOUNDMASTER DISC 3800 MP-3 Manuale utente

SOUNDMASTER

SOUNDMASTER highline DAB100 Manuale utente

SOUNDMASTER

SOUNDMASTER ICD3030 Manuale utente

SOUNDMASTER

SOUNDMASTER TR250 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD 7400USB Manuale utente

SOUNDMASTER

SOUNDMASTER PL 710 Manuale utente

SOUNDMASTER

SOUNDMASTER HighLine DISC 3220USB Manuale utente

SOUNDMASTER

SOUNDMASTER ICD3030 Manuale utente

SOUNDMASTER

SOUNDMASTER ICD2020 Manuale utente

SOUNDMASTER

SOUNDMASTER Highline DISC180 Manuale utente

SOUNDMASTER

SOUNDMASTER IR3200 Manuale utente

SOUNDMASTER

SOUNDMASTER NR50 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD-7510USB Manuale utente

SOUNDMASTER

SOUNDMASTER DISC 4040 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD - 5035USB Manuale utente

SOUNDMASTER

SOUNDMASTER MCD380BT Manuale utente

SOUNDMASTER

SOUNDMASTER EliteLine PL910 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD1700 Manuale utente

SOUNDMASTER

SOUNDMASTER MCD 5145USB Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente