4 Operating instructions Soyer Bolzenschweißtechnik
CONTENTS
8.2. Technical data for the PS-3A stud welding gun 30
8.3. Cleaning the stud welding gun 31
9. Description of the stud chuck for PS-3A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9.1. Adjusting the stud chuck 33
9.2. Inserting the stud chuck and stud feed pipe 34
10. Description of the UVR-300 universal feeder . . . . . . . . . . . . . . . . . . . . . . . . 37
10.1. Safety information for UVR-300 38
10.2. Overview of UVR-300 39
10.3. LED operating displays (device front panel) 42
10.4. Function keys and special functions 43
10.4.1 Special functions (potentiometer) 44
10.5. Converting the universal feeder 45
10.5.1 Carrying out the conversion 46
10.6. Adjusting the feeder 57
10.6.1 Adjusting the blow air regulator 57
10.6.2 Adjusting the blow-off nozzles 58
10.6.3 Adjusting the transport speed in the feeder bowl 59
10.6.4 Readjusting the limit switch 60
10.7. Correcting feeder malfunctions 61
10.8. Technical data for the UVR-300 64
10.9. Cleaning the UVR-300 65
11. Setup and connection of the automatic system . . . . . . . . . . . . . . . . . . . . . . 66
11.1. Requirements for the installation location 66
11.2. Connection diagram 66
11.3. Connections on the stud welding device 68
11.4. Connections on the feeder 72
11.5. Connections on the welding gun 74
11.6. Information about connecting the earth cable 75
12. Converting/adjusting the automatic system . . . . . . . . . . . . . . . . . . . . . . . . . 77
12.1. Converting the automatic system for the stud diameter 77
12.1.1 Conversion sets 77
12.2. Adjusting the device parameters 78
12.2.1 Explanation of the parameters 78
