SOYO G668 Manuale utente
Table of Content
SAFETY INFORMATION...................................................................... 1
INTRODUCTION................................................................................... 2
Configuration with a Single Computer ...........................................................2
Configuration within a Home or Office Network.............................................2
Package Contents..........................................................................................3
Front Panel of SOYO G668 IP phone............................................................4
Rear Side of SOYO G668 IP phone ..............................................................6
INSTALLATION..................................................................................... 7
Installation with a Single Computer................................................................7
Installation within a Home or Office Network.................................................9
CONFIGURATION VIA IP PHONE KEYPAD ..................................... 11
Configuration for DHCP (default).................................................................11
Entering Configuration Mode .......................................................................11
Configuration for PPPoE..............................................................................12
Configuration for Static IP............................................................................12
CONFIGURATION VIA WEB BROWSER .......................................... 14
Network Settings..........................................................................................14
Protocol Settings..........................................................................................15
Phone Settings.............................................................................................17
Audio Settings..............................................................................................19
Other Settings..............................................................................................20
Update..........................................................................................................20
Phone Book..................................................................................................20
SOFTWARE UPGRADING................................................................. 22
TROUBLESHOOTING........................................................................ 23
APPENDIX: PORT FORWARDING.................................................... 25
SOYO G668 Ethernet IP Phone User Guide
-1-
Safety Information
The SOYO IP Phone has been tested and approved by the highest standards
of safety regulations. However safety is your responsibility too.
Use only the power adapter provided
Do not disassemble this product without guidance
Never spill liquid of any kind on the product
Do not cut power off in the process of configuration and upgrading
SOYO G668 Ethernet IP Phone User Guide
-2-
Introduction
SOYO G668 IP phone is an advanced Internet Protocol (IP) device, allowing its
users to experience superb voice communications over the Internet. It works as
a standalone device (no PC is needed) with any broadband Internet connection.
This Internet connection can be either:
A Digital Subscriber Line (DSL) Internet service from a telephone company
A cable modem Internet service from a cable television company
Other high-speed Internet connection such as ISDN and T1
You can use G668 IP phone in your home or office network with any
broadband DSL or Cable modem, Ethernet router, switch and your computer.
Configuration with a Single Computer
You can connect G668 IP phone directly to any broadband modem, and
continue to surf the internet using your computer:
Configuration within a Home or Office Network
You can connect G668 IP phone to any router on a network with broadband
Internet connection such as DSL, Cable or T1.
SOYO G668 Ethernet IP Phone User Guide
-3-
Package Contents
Make sure the following contents are included in the G668 IP phone package:
One SOYO G668 IP phone
One Ethernet RJ-45 Cable
One DC 9V 1A Power Adapter
User Manual
SOYO G668 IP phone Ethernet RJ-45 Cable
Power Adapter
User Manual
SOYO G668 Ethernet IP Phone User Guide
-4-
Front Panel of SOYO G668 IP phone
SOYO G668 Ethernet IP Phone User Guide
-5-
Keys Functions
Local IP Without lifting the handset, press to get the IP address of this IP phone
Subnet Mask Without lifting the handset, press to get the Subnet Mask
Phone Number Without lifting the handset, press to get the phone number
Dialed Calls Without lifting the handset, press to get the list of the dialed numbers
Received Calls Without lifting the handset, press to get the list of the received numbers
Missed Calls Without lifting the handset, press to get the list of the missed call numbers
Speed Dial Use the number key pad to enter the speed dial number position of the phone
book entry, and press “speed dial” to connect (refer to page 20 for detail)
Backspace/Hold Press this key to put a call on hold
Redial Redial the last dialed phone number
Speaker Press this key to make a call without lifting the handset
Volume + Increase the volumes of handset or speaker;
Volume - Decrease the volumes of handset or speaker;
SOYO G668 Ethernet IP Phone User Guide
-6-
Rear Side of SOYO G668 IP phone
SOYO G668 Ethernet IP Phone User Guide
-7-
Installation
Depending on your network environment, you will need to perform one of the
following installations:
Installation with a Single Computer
Installation with a Home or Office Network
Installation with a Single Computer
1. Connect one end of the Ethernet RJ-45 cable to the broadband modem,
and connect the other end of the cable to one of the RJ-45 ports (either
one) at the rear of the G668 IP phone.
2. Connect one end of another Ethernet RJ-45 cable to your computer, and
connect the other end of the same cable to the other RJ-45 ports at the
rear of the G668 IP phone. (This is an optional step. IP phone can work
without the computer)
3. Connect the power adapter to the AC outlet and the power jack at the rear
of G668 IP phone.
4. Once the IP Phone is powered up, the booting sequence will begin. You
will see the following information displayed on the LCD screen:
LAN2LAN1
IP Phone
Ethernet port
Broadband
Modem
Ethernet port
Computer
(Optional)
SOYO G668 Ethernet IP Phone User Guide
-8-
Booting …
È
DHCP ting …
Connec
È
Ready For Calls
SOYO, Inc. V1.22
. If “Ready for Calls” appears on the LCD screen as shown above, your IP
6. dem and the LCD screen displayed “Wait ing on
7. u are using a static IP for the phone and you see “Wait Logon…” on
8. hooting” on
5phone is ready to use. Now you can pick up the hand set and start making
phone calls.
If you are using a DSL mo
Logon…” or “Logon Failed”, you may need to enable the PPPoE sett
your IP phone as described in “Configuration for PPPoE” section on page
12.
If yo
LCD display, you may need to change the IP setting on your IP phone as
described in “Configuration for Static IP” section on page12.
If you still have problems logging on, please refer to “Troubles
page 23 or call your VoIP provider.
Altri manuali per G668
1
Indice
Altri manuali SOYO Telefono IP
