Spark MF730M Manuale utente
Spark MF730M User Manual v1.0 Page 1 of 13
SPARK MF730M
3G USB MODEM
USER MANUAL
Spark MF730M User Manual v1.0 Page 2 of 13
CHECK YOUR SYSTEM REQUIREMENTS
Your USB modem will connect your PC or MAC to the Spark Network for mobile broadband.
A web browser is required to log in to your USB modem if you wish to make any configuration changes.
USB driverless connection is supported for Windows and MAC operating systems:
•Windows XP (SP3 and above), Windows Vista, Windows 7, Windows 8/8.1/10
•Mac OS X (up to 10.12)
Using the USB connection requires administrator rights to install and run the software.
We suggest you switch off your anti-virus software before connecting the modem. In some cases protection software can prevent automatic installation.
It is possible to start the installation process manually by clicking the Autorun icon when it appears.
GET TO KNOW YOUR USB MODEM
INSERT YOUR STANDARD SIZED SIM CARD
1. Slide the back cover down to access the SIM and memory card slots.
2. Insert your SIM card with the gold contacts facing down and the cut corner exposed as shown:
IMPORTANT NOTES: This device supports a standard SIM card size only (2FF). Do not use a SIM adaptor which might get stuck and damage your device.
Physical damage to the SIM tray will make your device unusable and is not covered by warranty.
3. If you want to add a memory card you can do it now. Your USB device supports up to 32GB microSDHC™ memory.
Spark MF730M User Manual v1.0 Page 3 of 13
4. Replace the cover.
5. You are now ready to connect your device and you’ll be on-line in no time.
Notes
•Adding a memory card is optional
•To access SD card on your PC go to My Computer and view Removable Disk
•To access SD card on your Mac go to the desktop and click on ‘No Name’
microSD™ cards supported to 2GB are FAT 16 format
microSDHC™ cards supported to 32GB are FAT 32 format
If using a memory card use the Safe Removal of Hardware process or Eject the device. Consult your operating system guidelines.
Handy hint
Remember to keep your plastic SIM card holder. It has a record of your PUK Code which you should keep handy.
Spark MF730M User Manual v1.0 Page 4 of 13
PLUG IN YOUR USB MODEM
Plug the modem into a spare USB port on your computer.
The USB Modem will start up in a few seconds. The LED light will change from red to flashing green when the device is connected to the network.
1. Click on ‘Open folder…’ 2. Double click the Autorun application:
3. The installation will create a short-cut on your desktop and open your browser at the device homepage.
USB INSTALLATION NOTES
•The installation will create a new shortcut on your desktop and a new program listing under Start-Programs
•If you have problems with the installation please contact your supplier or see our website, ztemobiles.com.au for more assistance and FAQ’s or call our hotline on (+61) 1300
789 475 available between 9am and 5pm AEST (International Calling Charges will apply)
•If you can’t connect to the internet check your SIM card is inserted correctly, contact your service provider and check your account is active
•To uninstall the application:
Windows users: Programs > Spark 3G Dashboard > Uninstall
MAC Users:
•Double click the Spark Modem CDROM on the desktop to install the device
•To uninstall, go to Applications and run Uninstall Spark 3G Dashboard
Spark MF730M User Manual v1.0 Page 5 of 13
HELP
•Click Help button to access this full user guide
•Click the Help icon to see in context help
•Go to ztemobiles.com.au for FAQ’s, product and warranty support
QUICK REFERENCES
Browser home page http://192.168.0.1
Spark MF730M User Manual v1.0 Page 6 of 13
DEVICE HOMEPAGE AND ICONS
Open a browser and go to 192.168.0.1 to access the device homepage.
NOTE: A red SIM card icon can mean any of the following states:
•SIM card is missing or incorrectly inserted. Check the SIM card is inserted correctly.
•SIM card is PIN or PUK locked (Enter the PIN number, or contact your carrier for the PUK code).
•SIM card is faulty.
Network
Type
Carrier
Name
Signal
Strength
Data
Connect
SIM
Status
SMS
Spark MF730M User Manual v1.0 Page 7 of 13
THE INFORMATION TAB
The Information tab shows the summary device status and whether you are connected to the mobile broadband network
•The device will automatically connect to the network
•To change this behaviour press Disconnect on the Home tab, then go to Settings > Network Settings > Dial-up Settings, and select Manual
Spark MF730M User Manual v1.0 Page 8 of 13
SETTINGS > NETWORK SETTINGS:
NETWORK SETTINGS > CONNECTION SETTINGS (AUTOMATIC CONNECTION):
•The default connection setting will automatically connect to the network. The setting is greyed out if you are connected.
•Press the Disconnect button on the Home tab to change this setting and to enable International Roaming if required.
•If you make any changes, press Apply to save the changes.
•Press the Help icon to get in context tips.
Spark MF730M User Manual v1.0 Page 9 of 13
SETTINGS > NETWORK SELECTION:
•Network Selection is set to Automatic. You can change to 3G or 2G only.
•Press the ‘Disconnect’ button on the Home tab to change these settings if required.
•If you make any changes, press ‘Apply’ to save the changes.
•Press the Help icon to get in context tips.
•Normally there is no need to change these settings unless you change service provider.
Spark MF730M User Manual v1.0 Page 10 of 13
SETTINGS > APN:
•Press the ‘Disconnect’ button on the device home page to add or change these settings if required
•Check Mode: ‘Manual’ and press ‘Add New’ to create a new APN
•Add the Profile Name, eg Data
•Enter the correct APN details eg internet
•Press Save to save your new APN
•Press the Profile drop down box
•Select the new APN profile
•Click on ‘Set as default’ to set the new APN as your preferred setting
•Press the Help icon to get in context tips
•Normally there is no need to change these settings unless you change service provider
•The device is configured for Spark, i.e. if you use a SIM card from another provider you may not be able to connect to their network
•Consult your new carrier to obtain alternate APN details for your device
Indice
Altri manuali Spark Modem
