8
Once setup is complete as shown above, connect the official Nintendo
Switch Pro Controller to the console port on the adapter using the official
data charge cable supplied with the controller. The LEDs on the adapter will
turn GOLD.
Simultaneously (at the same time) press “F11 + F12” on the keyboard. The
LED on the adapter will turn BLUE.
Press and hold the button you want to set on the controller, then press the
button on the keyboard or mouse you want to program, then release the
button on the controller to set it.
To program the next button, repeat the above steps (you can program up
to a maximum of 8 buttons on the controller)
Press “F11 + F12” again at the same time to complete programming the
buttons.
To restore the controller to default settings: Press and hold "F1 + F10 + F12"
on the keyboard for 5 seconds
1.
2.
3.
4.
5.
Mouse Sensitivity Settings
Mouse sensitivity can be adjusted up to 8 different levels.
Example:
If you would like to program the "B" button on the controller to the "T" key on your keyboard,
the steps are as follows:
Please note: The default mouse sensitivity level is level 4.
Press and hold “F11 + F12” on the keyboard, wait until the adapter LED is blue and then
release the keys.
Press and hold the "B" button on the controller, do not let go!
Press the "T" key on the keyboard, then release the "B" button on the controller;
To complete, hold down “F11 + F12” on the keyboard then release.
Hold down “F12 + 1” on the keyboard, the mouse sensitivity is reduced
to the Minimum (slowest) setting.
Hold down “F12 + 8” on the keyboard, the mouse sensitivity is increased
to the maximum (fastest) setting.
