6. The controller will enter sleep mode when not in use for more
than 5 mins. Press the HOME button once to restart.
Bluetooth Pairing Instruction:
1. Remove the battery cover at the back of the controller,
follow the battery contact indication to install 2x AA batteries
2. Replace the battery cover.
3. Remove USB Wireless Dongle from the PC or Android De-
vice
4. Make sure your device has Bluetooth connection switched
ON. Press & hold the HOME button for 3 seconds, the con-
troller will begin to search (the Bluetooth LED
flashing rapidly whilst in the Bluetooth pairing mode). Once
paired the lights will stay on. Now follow the instructions for
your PC/Android device. The LED lights will remain on
when connected to PC/Android devices. You may need to
allow pairing on your device, please check your devices
settings.
will start
Bluetooth Connection Instruction:
1. Make sure your USB Wireless Dongle is not plugged in to
your PC or Android Device
2. Press the HOME button once, the controller will start sear-
ching for the 2.4G dongle for 6 seconds. After that it will start
to connect to previously paired devices, the Bluetooth LED
will start to flash intermittently, the LED will stay on when con-
nected to the PC/ Android device
*BLUETOOTH connection only supports DINPUT mode, it does not support XINPUT mode.
