DESCRIPTION
The camera uses SONY charge coupled device (CCD)
image sensor, and employs digital signal processing
(DSP) chip-set for image control, and all integrated
state circuitry which provides extremely long life and
high reliability. This camera offers excellent image
quality, and is not subject to distortions from magnetic
fields. High resistance to shock and vibration, and easy
to install, this camera is the best choice for your CCTV
system.
TRADEMARKS
Sparsh logo is registered trademarks of Samriddhi
Automations Pvt. Ltd.
SONY, SONY Super HAD & SONY Super HAD-II is
registered trademark of Sony Incorporation.
All other brand, product names, and service names are
trademarks or registered trademarks of their respective
companies or organizations
LIMITATION OF LIABILITY
•This publication is provided “as is” without warranty of
any kind, either express or implied, including but not
limited to, the implied warranties of merchantability,
fitness for any particular purpose, or non-infringement of
the third party’s right.
•This publication could include technical inaccuracies or
typographical errors. Changes are added to the
information herein, at any time, for the improvements of
the publications and/or the corresponding product(s).
WARNINGS & CAUTIONS
•The information provided in the user manual is for the
safety of the customers. Please read the user manual
before operating the product and follow the instructions
provided accordingly.
Warning Messages
•Do not install under excess hot conditions.
Optimum operational temperature range is 0°C and
+50°C.
•Do not install under varying light conditions.
Continuously varying light frequency might cause
problems in the normal functioning of the camera.
•Do not put camera under shocks and jerks.
This may cause the serious disorientation or the
distortion in the components thereby causing the
malfunctioning of the product.
•Do not install under excess of humid conditions.
This may cause the deposition of water droplets on the
lens and several other sensitive components thereby
lowering the picture quality.
•Do not expose the camera directly to high light intensity
pulse.
This may damage the CCD or may create dead pixels in
the CCD.
•Do not expose camera to water.
This may result in malfunctioning of the camera or may
result in the corrosion of certain components due to
minerals contained in water.
•Do not expose camera to radioactivity.
Radioactive exposure may cause damage to CCD or may
produce dead pixels.
•Do not attempt to open the camera.
Unauthorized opening of camera is not permissible as it
could cause breakage of the fragile components.
•Do not use low quality cables and power supply.
Only recommended cables/wires and power supply
should be used for proper functioning of the camera.
If any abnormality occurs, make sure to unplug the unit
and contact your local dealer or our service centre.
