1. Introduction
Thank you for purchasing a Specac product.
The USB Temperature Controller is a high stability temperature
controller for use with heated Specac accessories. Operation of the
temperature controller is provided via the Windows® software supplied.
The USB controller can be used with various Specac accessories,
however for each type of accessory the firmware installed must be
specifically configured to operate the device correctly. Ensure the that
the controller is used with the correct accessory model number as stated
on the rating label of the USB controller device.
The software also provides identification of the accessory it is configured
for at the top of the screen above the graph display area.
Important! Don’t use the USB temperature controller with
an accessory it has not been configured for. This could
cause damage to the USB controller and/or the accessory.
Important! This user instruction manual should be read in
conjunction with the manual provided with the Specac
accessory.
WEEE Directive for Equipment Disposal
The symbol (above) on the back of the controller indicates that
this product complies with the Waste Electrical and Electronic
Equipment Directive (WEEE). If this product is in use and was
purchased within the European Union, please contact your
local sales agent or Specac to arrange for disposal of this equipment.
