Specim IQ Manuale utente

This guide provides rst-me users with

essenal informaon on recording data

with the Specim IQ.

Main setup informaon, dierent data record-

ing ows and essenal aer recording phases

will be presented. This page introduces White

Reference and dierent data recording modes.

To ensure a good data quality and maximal

performance of your Specim IQ, you must

always include White Reference (WR) in

your data recording ow. Three dierent

WR methods are presented in this guide,

Simultaneous WR, Customized WR and

Pre-Dened WR.

Default Recording Mode (DRM) is a device mode to collect raw,

unprocessed data. Below is a visualizaon of the data recording

ow with DRM and Simultaneous WR.

Applicaon Mode (AM) is a created mode to collect data which

is processed in a desirable way. Applicaons are created in the

Specim IQ Studio. Below is a visualizaon of the data recording

ow with AM and Simultaneous WR.

WR panel is included and de-

ned from the recorded data.

WR panel is recorded before the

actual data recording.

Preset WR sengs to match the

most common recording

environment illuminaons.

WR panel

Automac Screening Mode (ASM) is a device mode to idenfy

similaries from the recorded data. The desired material can be

chosen to funcon as a class that can classify similiar materials

from the data. In this mode, the class is rst dened and then

used for idencaon. Below is a visualizaon of the data record-

ing ow with ASM and Simultaneous WR.

WHITE REFERENCE

DATA RECORDING MODES

ASM

DRM

Pre-def.

Custom

Simult.

4. ILLUMINATION

Make sure that the data recording

target area is illuminated correctly.

See the recommended lighng

sources in the User Manual.

1. INSERT BATTERY

Slide the lock down

to release the

baery compart-

ment door.

Insert the baery

in the orientaon

shown, terminals

rst.

2. MEMORY CARD

See the memory

card is in it’s place

next to the baery.

If you wish to

change the memo-

ry card, slide the

memory card in as

shown, terminals

towards the back

of the device.

Slide unl it clicks

into place.

3. MOUNT THE SPECIM IQ ON A TRIPOD

Aach the tripod’s camera plate to

the tripod mount, located at the base

of the Specim IQ.

1. SETUP

SEE THE

MANUAL

OPERATING MODES

Recommended mode of operaon

Note that the Smart Camera should

be stable while recording data.

Specim IQ can also be powered by external

power source. Find out more in User Manual!

Tripod

Hand held

Tip

3.2. Set the WR to Your Target

Place the White Reference

panel next to your target, so

that it covers approximately

a minimum of 10% of your

Spectral camera view.

1. POWER ON

Press the Power buon to switch the Specim

IQ on. Power buon should be pressed for

2-3 seconds unl you hear a signal.

2. DEVICE SETUP

2.1. Press the SET buon

to go to the Menu.

3. DATA RECORDING SETTINGS

3.1. Half press the shuer buon to

setup the Data Recording Sengs.

Data Recording Sengs includes

seng up the correct integraon

me and focusing the Specim IQ.

This data recording ow uses Default Recording Mode (DRM) and

Simultaneous White Reference method. In this WR method the WR

panel is included in the recorded data and dened aer the

recording.

3.3. Integraon Time

See the Integraon Slider

on the right. The white

indicator line will auto-

macally be set up to

the green bar, which

shows the opmal value

for the integraon me.

You can change the integra-

on me by sliding the

white indicator line with

your nger, or control it

with the navigaon buons.

3.4. Focus

Rotate the focus ring unl

the target is highlighted with

maximum amount of orange

indicators.

2.3. Press SIMULTANEOUS

on the touch screen,

or choose it with the

navigaon and SET

buons.

2.2. Choose DRM

mode by pressing

the Custom 1

buon. Return to

Viewnder view

with Back buon.

Then, press the WR

method buon.

2. DATA RECORDING

DRM Simult.

5. VALIDATE THE DATA

Validate and check the data quality

from the image preview and the

intensity histograms. If there are

red highlight areas in the image

preview and in the maximum

intensity histogram, the data is

partly saturated. In this case

consider changing the integraon

me shorter from the data record-

ing sengs and repeang the data

recording. If there are blue

highlights in the maximum intensity

histogram the integraon me

might be too short and some parts of the data are not illuminated properly.

In this case consider changing the integraon me longer. By pressing

DISCARD you can redo your DRS setup and record the data again. By

pressing KEEP, your data will be saved.

SEE THE

MANUAL

4. CAPTURE THE DATA

Fully press the shuer buon to record the data.

Target spectrum

By tapping a certain area, you can see

the spectrum of that pixel.

Tags

You can add tags to the data or to the

targeted pixels of the data.

Data info

See info about your data, delete datasets

and add addional text informaon.

6. WR SELECTION

Aer validang the data, dene the White Reference

from your data. Use the intesity slider on the right to

help select the correct WR area. Tap the WR on the

touch screen, or select it with the navigaon buons.

Choose SET on the screen when done.

7. THE RESULT VIEW

The result view has three funcons

that are located in the upright

corner.

NOTE: By pressing DISCARD,

your data will not be saved.

Focus

camera view

Enlargement of the

focus indicators

Spectral

camera view

Custom

This data recording ow uses the DRM and Custom White Refer-

ence method. In this WR method, the WR panel is recorded and

dened before the actual data recording.

Pre-def.

This data recording ow uses the DRM and Pre-dened White Refer-

ence method. In this WR method, the user chooses the most suitable

preset opon that matches the working environment illuminaon.

1. DEVICE SETUP

Press the SET buon to go to the Menu, choose DRM.

2. WHITE REFERENCE SETUP

2.1. Press the WR method buon and choose CUSTOM.

Choose DEFINE for a new data recording session.

2.2. Set the White Reference panel

to the Focus Camera view.

2.3. Data recording sengs. Half press the shuer buon

and set the correct integraon me and focus.

2.4. Fully press the shuer buon to record the WR data.

2.5. Validate the data and perform the WR selecon from the

shooted data. When ready, choose Set WR.

3. DATA RECORDING SETTINGS

Half press the shuer buon. Setup the integraon

me using the slider and focus the Specim IQ.

4. CAPTURE THE DATA

5. VALIDATE THE DATA

1. DEVICE SETUP

Press the SET buon to go to Menu. Choose DRM.

2. WHITE REFERENCE SETUP

2.1. Press the WR method buon and choose

PRE-DEFINED.

2.2. Choose a suitable opon for your data

recording environment.

3. DATA RECORDING SETTINGS

Half press the shuer buon. Setup the integraon

me using the slider and focus the Specim IQ.

4. CAPTURE THE DATA

5. VALIDATE THE DATA

3. DATA RECORDING 4. DATA RECORDING

DRM DRM

Halogen Halogen lighng.

PRE-DEFINED WHITE REFERENCE

1. TRANSFERRING THE DATA

Memory Card (Opon 1)

Power o the Specim IQ. Open the bat-

tery compartment door. Push the memo-

ry card and it will spring out. Then, aach

it to your PC.

Charge the Baery

Set the baery to the charger, see

instrucons in the charger’s manual.

Remove the Baery

Pull the baery removal tab and

remove the baery from the

compartment.

USB (Opon 2)

Open the USB

cover from the

lower le corner.

Aach the USB

cable and

connect it to

your PC.

2. REMOVE AND CHARGE BATTERY

3. IMPORT DATA TO

SPECIM IQ STUDIO

3.1. Open the Specim IQ

Studio on your PC.

3.2. Find your Specim IQ

or memory card from the

le bar and click it open.

3.3. Select the datasets you wish

to import. Choose Import

selected data from the upright

menu bar.

3.2. Choose a locaon where the

datasets will be saved, either

create a new catalog or choose

a catalog that already exists.

5. AFTER RECORDING

Specim IQ Studio is soware for the Specim IQ, and

other hyperspectral imaging devices. IQ Studio al-

lows you to import, export and manage hyperspec-

tral data, manage Specim IQ sengs, create new

applicaons, models and reference spectrums. With

the IQ Studio, it is also possible to save, load, import

and export Device proles.

SEE THE

MANUAL

SPECIM, Spectral Imaging Ltd. ▪ POB 110, FI-90591 Oulu Finland

Elektroniikkae 13, Oulu Finland ▪ www.specim.

Altri manuali per IQ

Indice

Altri manuali Specim Macchina fotografica digitale

Specim

Specim FX17 Manuale utente

Specim

Specim FX10 Series Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente