Speco INTENSIFIER CVC6246IHR Manuale utente
CVC6246iHR
CVC6246iHR
580 Line Color Dome Camera
Intensifier 2 Series
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE
PERSONNEL
CAUTION
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
ariskofelectricshocktopersons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
in
the
literature
accompanying
the
appliance
SERVICE
PERSONNEL
.
_
_____________
_
in
the
literature
accompanying
the
appliance
_
_________________
INFORMATION -This equipment has been tested and found to company with
limits for a class “A” digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipment is operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
id ti l
i
lik l
t
hfl
it f
i
hi h
DO NOT use power sources other than that specified.______
res
id
en
ti
a
l
area
i
s
lik
e
l
y
t
ocause
h
arm
f
u
l
i
n
t
er
f
erence
i
nw
hi
c
h
Casetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO
NOT
expose
this
appliance
to
rain
or
moisture
000
DO
NOT
expose
this
appliance
to
rain
or
moisture
.
000
This installation should be made by a qualified service person and should conform to all local codes.
2
CONTENTS
Package Contents 4
Precautions 5
Camera Installation 6-7
OSD Menu Tree
Features 8-9
10
OSD Menu Details 11-14
Troubleshooting 15-16
Specifications 17
Dimensions 18
3
Warranty 19
PACKAGE CONTENTS
Please make sure that the following items are included
in the package:
1 CVC6246iHR Camera
2 Mounting Screws
1 Video Test Connector
Please leave this manual with the end-user for future
reference.
COMPATIBILITY
DFM Series
“A” type Box
4
Electrical Box is not included in the package but
Is compatible with the camera
PRECAUTIONS
•THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED
PERSONNEL
•TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
•DO NOT CLEAN THE DOME COVER WITH AN ABRAISIVE
CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR
TISSUE TO CLEAN THE DOME COVER
•THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
TO MAKE INITIAL ADJUSTMENTS
•
PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
•
PLEASE
USE
A
UL
APPROVED
REGULATED
24
VOLT
AC
OR
12 VOLT DC POWER SUPPLY
•PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
•PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
•PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
5
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
Power Input :RED
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
DC 12V Power Supply
Center : (+)
BLACK:(
)
RED(+)
AC 24V
3. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
BLACK:(
-
)
Power Suppl
y
4. CONNECT Alarm output (Relay output)
-Connect (+ , COM) for Positive activation and (-. COM) for
Negative activation of External Alarm Device when Motion
Detection is ‘ON’ in the camera.
+ RED Positive Alarm Device (NO)
6
-WHITE
COM (GREY)
Alarm Output
Negative Alarm Device(NC)
CAMERA INSTALLATION
MECHANICAL
(1) DC Auto iris Lens
(2) JOY STICK
(1) DC AUTO-IRIS LENS
Adjust between TÅÆW (TELE ÅÆ WIDE) to set the
angle (focal length). Set the focus by adjusting 쏒N
(3) Video Test Terminal
NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED
INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
(2) JOY STICK
TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY
STICK FOR ONE SECOND AND SET AS DESCRIBED
IN THE MANUAL
7
(3) VIDEO TEST TERMINAL
FEATURES
Horizontal resolution of 580 TV lines is achieved by using a
SONY Super-HAD CCD with 410,000 pixels, and a custom DSP
yielding pictures with a high S/N ratio..
High Resolution
1/3 inch High-inch density CCD and digital processor permit high
quality Pictures to be captured in very low light condition.
INTENSIFIER
SPECO DNR
Motion Detection with Alarm Output
The Intensifier camera has a DSP chip that can remove image
noise efficiently showing clean images in low light conditions.
SPECO
DNR
Built in motion detector with adjustable areas of coverage will
Send a signal to an external alarm device when motion is detected.
Motion
Detection
with
Alarm
Output
DAY/NIGHT
The Intensifier camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
picture in low light conditions
8
FEATURES
Wh th i i i f t f t b k d li hti
SLC
All camera functions are menu driven for easy use.
OSD
Wh
en
th
e
i
mage
i
s
i
n
f
ron
t
o
f
s
t
rong
b
ac
k
groun
d
li
g
hti
ng,
your camera allows you to get a clear image.
This function reverses bright spots in the picture (such as
HLC (High Light Compensation)
headlights). This enables the entire system to do a better job of
resolving and displaying grayscale information such as a
license plate.
STABILIZATION
This function removes image jitter that is caused by vibrations in
the building and reduces the amount of hard drive space.
PRIVACY
It also has the ability to mask up to 8 areas of the picture where
Viewing is not desired. Each zone can be independently
programmed via the OSD
9
OSD MENU TREE
ADJUST LENS
INTENSIFIER
COLOR TEMP
DC IRIS
E SHUTTER AUTO GAIN INTENSIFY RETURN
COLOR
TEMP
WDR SET
SPECO DNR
SLC HLC OFF
ATW INDOOR OUTDOOR AWC SET MANUAL
DAY & NIGHT
TWEAK VIDEO
ON OFF
COLOR B/W AUTO
CAM TITLE SYNC TYPE V MOTION
PRIVACY STABILIZE LANGUAGE
PAGE 2
STILL PIX V-REVERSE
DIGI-ZOOM CLARITY
H-REVERSE
RETURN
DEFAULTS PAGE 1
EXIT
10
Altri manuali per INTENSIFIER CVC6246IHR
2
Indice
Altri manuali Speco Telecamera di sicurezza
Speco
Speco INTENSIFIER HTINTB10 Manuale utente
Speco
Speco V5B1 Manuale utente
Speco
Speco CVC6146SCS Series Manuale utente
Speco
Speco Bullet2 HT-INTB4 Manuale utente
Speco
Speco VLEDB1HG/W Series Manuale utente
Speco
Speco WC-2503 Manuale utente
Speco
Speco O4VD1N Manuale utente
Speco
Speco O4iB2 Manuale utente
Speco
Speco VLB11SCSFF Manuale utente
Speco
Speco HT-647HRTP Manuale utente
Speco
Speco O4iB1 Manuale utente
Speco
Speco HTINT58K Manuale utente
Speco
Speco ONSIP O2D4 Manuale utente
Speco
Speco ONSIP OPTZ36XO Manuale utente
Speco
Speco HT-7246IHR Manuale utente
Speco
Speco CVC-1700 Manuale utente
Speco
Speco HT-647HRTP Manuale utente
Speco
Speco CVC-105CM Manuale utente
Speco
Speco O4P25X Manuale utente
Speco
Speco O4B6N Manuale utente
