Spectra Geospatial SP30 Guida all'installazione
FAQ
July 2022
SP30 FAQs
What is the SP30 handheld?
The Spectra Geospatial SP30 handheld is an ultra-rugged, all-in-one smartphone and high
accuracy GNSS data collector. It features an array of powerful features such as a bright 6-inch
display, 2.2 GHz processor, Android™ 10 operating system, and large memory and storage.
For high-accuracy positioning virtually anywhere in the world, the SP30 supports L band and
can connect to Trimble Field point RTX service. The SP30 handheld is completely
customizable with Google Mobile Services and is compatible with MobileMapper Field and
office software, Trimble Penmap® for Android software, as well as third-party Android
compatible apps such as Esri® Collector for ArcGIS®. With an enhanced all-day battery, 4G
LTE connectivity, Bluetooth® 4.1, and durable exterior, this next generation SP30 handheld is a
powerful, comprehensive solution for reliable communication and data collection.
What are the key features of the SP30 handheld?
High accuracy GNSS receiver, 6-inch touch screen, two cameras (front and back), up-to-date
connectivity, dependable ruggedness, high processing power, high capacity replaceable
battery, Android 10 operating system.
This document is for informational purposes only and is not a legally binding agreement or offer. Spectra Geospatial makes no warranties
and assumes no obligations or liabilities hereunder.
© 2022, Trimble Inc. All rights reserved. Spectra Geospatial is a Division of Trimble Inc. Spectra Geospatial and the Spectra Geospatial logo
are trademarks of Trimble Inc. or its subsidiaries. All other trademarks are the property of their respective owners.
www.spectrageospatial.com
Page 1
Operating System
What operating systems does SP30 handheld support?
The SP30 handheld is powered by the Android 10 operating system. This is an open and fully
GMS-certified operating system enabling you to run any application, for example, Spectra
Geospatial MobileMapper Field, and third party applications such as Esri collector for ArcGIS,
etc.
How do I activate Android 10 on the SP30 handheld?
The Android 10 operating system will guide you through the configuration process the first time
you turn on the handheld. This process takes a few minutes. You should set up a Google
account and user. After the initial setup, you can change the user settings and most of the other
settings through the Settings menu
Inside the box
What is in the SP30 handheld packout?
The SP30 handheld packout includes the following items:
● Handheld with battery
● USB-C data cord
● Screen protector
● Hand strap
● A/C charger
● Quick start guide
● Pouch
● Monopole adaptor
● Battery openner tool
● Screw driver for handstrap hooks installation
www.spectrageospatial.com Page 2
What optional accessories are available for the SP30 handheld?
Pole mount, AC adapter, spare batteries, external antenna, and Dual Battery Charger. For more
information, contact your Spectra Geospatial dealer.
What is the SP30 Android version?
SP30 is running Android 10. It can be checked in Setting Menu/About.
What is Google Over-The-Air?
Google Over-The-Air (GOTA) supports Android operating system updates to be pushed to the
end-user rather than to manually connect and update. SP30 supports GOTA and the user will
be prompted automatically when connected to the internet if a new version of the Android
operating system is available. The upgrade will be done automatically over the air.
Can the SP30 Android version be upgraded?
SP30 is running Android 10.0 and can be upgraded to a new Android 10 version via GOTA
(automatic upgrade over the air). SP30 will not be upgradable to Android 11.
For how long will security patches be available for SP30?
Android security updates provided until December 2024.
Software application
What is the SPace application?
Spectra Geospatial SPace is a free of charge application available from Google Play. Space
provides all the settings needed to configure the SP30 high-accuracy GNSS receiver. SPace is
needed for MobileMapper Field and for any 3rd party mock location-based application. SPace
acts as the Android Mock location provider and feeds the Android Location service with
high-accuracy data from the SP30 GNSS. Then, any 3rd party Mock location-based application
will get the SP30 GNSS positions as well.
Is SPace needed all the time?
No, in some cases the applications are not using the mock location service because they can
connect directly to the SP30 GNSS. This is the case with PenMap for example which is using
Trimble TPSDK to access and configure the SP30 high-accuracy GNSS receiver. In that case
SPace will not be needed and the control of the GNSS receiver is done directly from the
application itself.
www.spectrageospatial.com Page 3
What is the SGIM application?
Spectra Geospatial Installation Manager (SGIM) is preinstalled on SP30 and will replace GNSS
loader which was used for SP20. It will be used to install SP30 configurations and upgrade the
GNSS firmware if needed,
● Install Accuracy configuration on SP30. Start Spectra Geospatial Installation Manager
and select "Download license".
● Any configuration assigned to this device by the Spectra Geospatial distributor in
Virtual Ware House will be listed here. Select the corresponding line to install the
configuration on SP30.
How to enable Mock location on SP30?
Enable Mock Location in order for location-aware apps to have access to accurate positioning.
● Activate Developer mode: Settings/About Device, Tap 7 times on "Build number"
● Access to Developer options: Settings/System/Advanced/Developer options
● Activate Mock Locations: in Developer options/DEBUGGING/Select Mock location app.
For SP30, SPace should be selected (app available on Google Play) for use with
MobileMapper Field or 3rd party applications.
Is the SP30 handheld ruggedized?
SP30 handhelds are designed for ruggedness:
www.spectrageospatial.com Page 4
• Operating temperature: -20° to +55°C (-4 to 131°F) (6), (7)
• Storage temperature: -40° to +70°C without battery (-40 to 158°F) (6)
• Humidity: 5% to 90% RH, non-condensing. According to MIL-STD-810H 507.6
• Water & dust proof: IP67 (IEC 60529)
• Salt fog (MIL STD 810 H method 509.7)
• Free drop: 1.2 m (3.9ft), 10 drops (2 faces, 4 edges and 4 corners) on concrete
• Shocks: MIL STD 810G (fig 516.6-10 Procedure I)
• Vibration: MIL-STD-810G (fig 514.6CI-Cat4)
• Altitude: MIL-STD-810G-2014 Method 500.5
Accelerometer
How do I enable the accelerometer and electronic compass?
The orientation sensors are active and applications can access and use the sensors. To see
the sensor output, free tools are available from the Google Play Store.
What size is the SIM card?
The SP30 handheld requires a NanoSIM. SP30 has two slots for Sim cards.
How do I change the SD and SIM card?
The SIM card and SD card slots are located underneath the battery cover on the back of the
device.
1. Turn off the handheld.
2. In a dust-free indoor environment, remove the battery cover on the back of the device,
push the two top slides down, and push the four side locks down to the unlocked
position.
3. Remove the battery; push the battery lock left to the unlocked position, then lift the
battery out left-side first.
4. Insert one or two SIM cards into the SIM card slots; make sure you insert the card
correctly as illustrated on the sticker, taking note of the direction of the notched corner.
5. If necessary insert a MicroSD memory card, metal contacts down, in the slot above the
SIM card slots.
6. Replace the battery and push the battery lock right to the locked position.
www.spectrageospatial.com Page 5
7. Replace the battery cover and lock it into place.
Screen
Do I need a screen protector?
Yes. Spectra Geospatial strongly recommends using a screen protector. One screen protector
is installed on SP30 handheld out of the box, you just need to remove the protection mask as
shown below
One more screen protector is also provided in the SP30 box as a spare.
How do I apply the screen protector?
Make sure the screen is clean before you apply the screen protector; any dust or dirt between
the screen and screen protector will be visible and degrade your display experience.
1. Place the device on a clean, flat surface.
2. Clean the touchscreen with a damp cloth, alcohol wipe, or similar.
3. Remove the protective film from the screen protector.
4. Align the screen protector with the glass portion of the display. The screen protector
should line up evenly with the edges of the device.
5. Carefully lay the screen protector on the screen. If you make a mistake and the glass
looks off-center, you can gently lift the screen protector up and realign it. Then, once the
protector is on the screen, give it a soft press in the center and allow the adhesive
surface to grip the screen naturally.
6. If there are any bubbles remaining, use a cloth to gently smooth them toward the edges
of the screen protector.
How do I lock the screen rotation?
Go to Settings / Display / Advanced and tap Auto-rotate screen to toggle the rotation lock
on/off.
www.spectrageospatial.com Page 6
What is important to know about capacitive touchscreens?
Capacitive touchscreens are very common in today’s tablet computers and smartphones. The
SP30 handheld has a capacitive touchscreen that is highly responsive to the touch of a finger.
You can easily zoom into images or data (if the software used supports a dual touch user
interface).
The capacitive touchscreen is based on the user being a conductor to enable the touchscreen
properties. If you are using gloves, such as during very cold weather, Spectra Geospatial
recommends using gloves that are designed for capacitive touchscreens, or the stylus.
To enable the Glove mode, go to Settings/Accessibility/Glove mode and check the box
The capacitive screen does also work in rain. However, in heavy rain false contacts may
happen.
Use of polarized glasses with SP30
When using polarized glasses with SP30 you can experience difficulties to have clear vision of
the display. In that case you can try to rotate the SP30 in order to improve visibility of the SP30
display.
How do I attach and use the handstrap of the SP30?
Screw the top and bottom hand strap attachments to the back of the handheld
Feed the hand strap ribbon ends through the attachments.
Pull one end of the ribbon back towards the center of the hand strap and velcro it to the strap.
Repeat with the other ribbon end.
Secure the hand strap wrap in place.
www.spectrageospatial.com Page 7
Connectivity
Can the SP30 handheld be used for voice calls?
Yes, the SP30 handheld supports voice call capabilities.
Which are the cellular networks supported by SP30?
It is difficult for us to give a detailed list of supported networks but SP30 will run on most of the
LTE cellular networks worldwide. Note that SP30 is not specifically PTCRB certified even if the
cellular component is the same as MobileMapper 60 which is PTCRB certified.
How can I switch between two mobile networks with the SP30 handheld?
The SP30 handheld has two nanoSIM slots that can be used for connection between two
separate mobile carriers. To switch between networks, go to Settings / Network & Internet /
Mobile network / select the preferred SIM SLOT 1 or SIM SLOT 2.
How can I transfer data with my SP30 handheld?
Data can be transferred from the SP30 handheld using the following methods:
● Via cloud-based file sync services (for example, Trimble Connect, Dropbox, Microsoft
OneCloud, Google Drive sync, or with other cloud-based apps) over Wi-Fi or 4G.
● Via Wi-Fi connection using a wireless LAN connection to an access point
● Via Bluetooth using the file explorer application, by selecting the file to transfer and
clicking on the share icon, then on Bluetooth icon
● Via USB cable to a laptop computer
How can I use the SP30 handheld Wi-Fi capability?
The SP30 handheld has integrated Wi-Fi that can be used to receive data anywhere within the
range of a Wi-Fi access point. A Wi-Fi connection can be used to connect to the Internet (at
broadband speeds) through an access point.
NOTE: When there is an active connection to a Wi-Fi access point, power consumption
increases and the battery will discharge more rapidly.
How can I use the Bluetooth capability?
The SP30 handheld has an integrated Bluetooth® radio to establish cable-free connections to
other Bluetooth devices that are within 10 meters.
Using a Bluetooth connection, you can communicate with other Bluetooth-enabled devices
such as mobile phones, desktop computers and more. You can also communicate with
Bluetooth-enabled peripheral devices instead of using USB connections.
NOTE: When there is an active connection to another Bluetooth device, power consumption
increases and the battery will discharge more rapidly. Individual usage patterns will vary by
www.spectrageospatial.com Page 8
device and the frequency of the Bluetooth
communications
What type of cable connections does the SP30 handheld support?
The SP30 handheld has a USB type C data transfer cable.
How can I reset my SP30 handheld?
Go to Settings / System / Advanced /Reset options / Erase all data (factory reset). Note, this
will erase all data from the device.
How do I update the Android operating system?
Go to Settings / System / System update / Check for update and update the system if it is
not up to date.
Power
Will using WWAN impact my battery life?
Yes. However, battery life is a complex calculation, based on a variety of factors that include
software applications in use, wireless features in use (Bluetooth, Wi-Fi, cellular modem),
exposure to extreme heat or cold, age of the batteries, and battery storage and charging
routines. Using the WWAN feature requires power and that comes from the battery when the
device is not plugged into an electrical outlet.
Battery removal
There is no hot-swap capability on the SP30 so removing the battery will irremediably switch off
the unit.
First unlock the 6 lockers, 2 at the top and 2 on each side.
Please use the battery opener provided with the product or any other tool. This is much easier
and safer for your nails.
Removing the battery is needed to install a SIM card or an SD card memory.
Unlock the locker and insert the tool on the left side, as shown on the picture below.
www.spectrageospatial.com Page 9
How do I change the battery?
Do the following:
1. In a dust-free indoor environment, remove the battery cover on the back of the
device—push the two top slides down, and push the four side locks down to the
unlocked position.
2. Remove the battery; push the battery lock left to the unlocked position, then lift the
battery out left-side first.
3. Replace the battery and push the battery lock right to the locked position.
4. Replace the battery cover and lock it into place.
Why are the batteries arriving "dead"?
The batteries are not dead but in sleep mode. This prevents the batteries from degrading when
shipping or being on a shelf. The batteries will "wake up" once charged in a SP30 handheld or
the charging dock (available as an accessory). The very first task after unpacking is to connect
the AC power and charge the battery fully over a 4 hour time period
Can I charge the batteries in my SP30 handheld?
Yes. The battery can be charged in the SP30 handheld. A stand-alone Dual Battery Charger
accessory is available if additional power is needed to support longer use days or to support
workflows that require more than one battery.
How do I maximize battery life?
www.spectrageospatial.com Page 10
Altri manuali Spectra Geospatial Palmare
