Spectro-UV Spectroline EDGE 13 Manuale utente

OPERATOR’S MANUAL

www.Spectro-UV.com

4 Dubon Ct., Farmingdale, NY 11735

866-230-7305

7/20 AM18065ML-3

Printed in U.S.A.

EDG-13HC

EDGE™ 13

UV-A LED Inspection Flood Lamp

ENG - 1 FR - 9 ES - 17 DE - 25

EDG-13HC KEY FEATURES:

• Nominal steady-state intensity of 8,500 µW/cm2at 15 inches (38cm).

• Large coverage area of 24 inches x 22 inches with a minimum UV-A intensity

of 1,000 µW/cm2.

• Less than 1.0 foot-candle (11 lux) visible light emission.

• Long-lasting UV-A Lenses.

• Cool running, fanless design.

• Multiple units can be ganged together, utilizing a single power source.

• Adjustable mounting bracket.

• IP65 Rated: The EDGE™ 13 Series lamps are protected from total dust ingress

and from low pressure jets of water (from all directions). For more details,

consult EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).

• The EDGE™ 13 is CE, CCC, RoHS, and WEEE compliant.

Meets EN ISO 3059 standards for non-destructive testing.

• Certicate of Conformance (ASTM E3022-18) included.

FIRST USE

• The EDGE™ 13 UV-A LED ood lamp is shipped factory set at the specied

intensity for optimal performance during inspections.

• Carefully unpack and inspect the lamp for possible damage during shipment.

If any damage is noted, immediately notify the carrier and supplier before

attempting to use the lamp.

• Make tests in a darkened area for best uorescent response.

• Prior to plugging the unit into a grounded receptacle, ensure that the power

switch is in the OFF position. The EDG-13HC lamps have a two-position rocker

switch (O = o󰀨; I = on).

• Push the power switch to the ON position. Instant-on operation ensures that

each of the UV-A LEDs reaches full intensity very quickly. Check to see if the

unit is operating optimally.

WARNING

UV emitted from this product.Avoid eye and skin exposure to unshielded products.

FOR PROFESSIONAL EXAMINATION USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

The EDGE™ 13 Series UV-A LED flood lamps must be used with a properly

grounded outlet. Please read the instructions in this manual carefully before

using the unit. Never use the equipment in any manner not specified in these

instructions. The lamp is completely safe when used as directed (see MOUNTING

INSTRUCTIONS FOR SAFE OPERATION). We recommend using

Spectroline®UV-absorbing protective eye and facewear. See REPLACEMENT

PARTS AND ACCESSORIES for model numbers. The available eye and facewear

also improves the contrast between the fluorescent area and the background.

The operator should stand away from the UV beam and not in a direct line of

sight. NOTE: No UV light should be seen on clothing or body parts. UV

reflection on clothing means the operator must move outside of the UV beam.

For maximum personal safety, we recommend using either the Spectroline®

UVF-80 face shield, UVG-50 goggles or UVS-30 spectacles.

NOTE: Be sure to use genuine EDGE™ 13 replacement parts. Using another

manufacturer’s replacement parts could affect product performance and will

void the lamp warranty.

NOTE: If the internal temperature of the unit becomes too high, it will turn off

automatically to prevent internal damage or to prevent improper use

(EDG-13HC ONLY). In this case, allow the unit to cool down. The unit will turn on

once a correct operating temperature is reached.

MOUNTING INSTRUCTIONS FOR SAFE OPERATION

Secure two eyebolts to the mounting bracket. Attach one metal chain link to each

of the eyebolts (not supplied). You may also a󰀩x the unit to any location utilizing

the mounting bracket and bolts. Assure the anchor you are utilizing is secure and

can safely hold the weight of the unit.

Mounting Bracket

Adjustment Bolt

HOUSING MAINTENANCE

The lamp housing is designed for the protection of internal parts. After unplugging

the unit, clean spills on the outer housing with water and a mild detergent. Wipe

the unit dry. After unplugging, periodically clean the clear protective glass lter with

a cleaner and a soft cloth.

CONNECTING THE EDGE™ 13

Connect the AC Control Box to the EDGE™ 13 by securing the male-to-female

connections. Align the male-to-female connectors and turn the adjustable housing

of the connector clockwise to tighten and secure the connection. Use the Gangable

Connector to connect multiple EDGE™ 13 units together. Assure the connections

are secure before using the AC Control Box to turn the unit ON.

Two-Position Rocker Switch

CLEAR GLASS FILTER PROTECTOR REPLACEMENT

A set of detailed instructions for Replacing the Clear Glass Filter Protector comes

with the ordered replacement parts. Contact Customer Service for more details.

Call toll-free 1-866-230-7305.

REPLACING THE UV-A LENSES

The UV-A lenses covering the three UV-A LEDs must be replaced over time. They

will solarize (become cloudy and yellow) from repeated use. A set of detailed

instructions come with the replacement UV-A lenses. See Replacement Parts

section and contact Customer Service for more details.

POWER SWITCH

The EDGE™ 13 comes with a two-position rocker switch (O = o󰀨; I = on). Prior

to plugging the unit into a grounded receptacle, ensure that the power switch is in

the OFF position. Push the power switch to the ON position. Instant-on operation

ensures that each of the UV-A LEDs reaches full intensity very quickly. Check to

see if the unit is operating optimally.

Female Power

Connector

Receiving

Male Port Female Port for

Ganging Units

Together

INTENSITY VERIFICATION

To ensure your EDGE™ 13 UV-A LED ood lamp is operating at the required UV

intensity, it should be checked periodically. Spectroline o󰀨ers a variety of radiometers,

accessories, and kits for ensuring device maintenance. The AccuPRO™

(XP-2000) readout unit features a single dual-wavelength sensor detector designed

to measure both ultraviolet and visible light. For more information about these

units, please contact the Customer Service Department at Spectro-UV.

ENVIRONMENTAL CONDITIONS

The EDGE™ 13 lamps are designed to be safe under the following conditions:

• For Indoor/Outdoor Use (dustproof and protected against low pressure jets of

water);

• Temperature 41°F to 122°F (5°C to 50°C);

• Mains supply voltage uctuations not to exceed ±10% of the nominal voltage.

LIMITED WARRANTY

The warranty policy for the EDGE™ 13 is provided on the Certicate of Limited

Warranty enclosed separately with each unit. NOTE: For assistance of any

kind, please contact the Customer Service Department at Spectro-UV. Provide

the model, the serial number of the unit, and the date of purchase. The unit’s

serialization information is located on the back of the housing. If return of the unit

to the factory is deemed necessary, shipping instructions will be provided. If an

estimate of charges for non-warranty work or other service work is required, a

quote will be furnished upon evaluation of the unit. Out-of-warranty service work

will not be performed without customer approval. Use only replacement parts

supplied by Spectro-UV. Use of any other parts may damage the unit and will void

the warranty.

SHIPPING

Please be prepared to provide the model number and serial number of the unit

when you contact the Customer Service Department at Spectro-UV. Carefully pack

the unit in the original shipping and packing material. Ship the unit prepaid to the

factory and reference your Spectro-UV Return Material Authorization number on

all paperwork. Be sure to insure the unit for full value.

The AccuPRO™

(XP-2000) Kit

A A

B B

WESTBURY, NEW YORK 11590

956 BRUSH HOLLOW ROAD

CORPORATION

SPECTRONICS

REV

DRAWING NUMBER

SIZE

DATE

APPROVED

CHECKED

DRAWN

TITLE

NEXT ASSY.

NO. REQ'D

SCALE

30'

.005

ANG.DEC.

UNLESS OTHERWISE SPECIFIED

DIMENSIONAL TOLERANCES

FRAC.

1/64

- -

MATERIAL FINISH SPECTRONICS PART NO.

A-18126

PHILIP C

8/20/2018

C:\Engineering\Projects\EDGE LAMPS\A-18126, EDGE-13HC, ASSEMBLY, MANUAL.idw

NA NA

DISCLAIMER NOTICE

This drawing is the property of Spectronics Corporation.

It contains confidential and proprietary information that

cannot be reproduced or divulged, in whole or in part,

without prior written authorization from Spectronics' Engineering

Department. All technical information on this drawing is for

informational purposes only, and is provided in confidence for

mutual assistance. It may not be used to manufacture anything

without prior written authorization from Spectronics' Engineering

Department.

EDGE-13HC,

MANUAL

EDG-13HC

1 3

EDGE-13HC REPLACEMENT PARTS

ITEM PART NO. DESCRIPTION

1131162 CLEAR GLASS FILTER ASSY. W/ GASKETS

2 131434 MASK SPACERS (PACK OF 4)

3 131432 BLACK LIGHT FILTER ASSY. (PACK OF 10), EDGE-13HC

4 131430 UV-A LENS (PACK OF 10), EDGE-13HC

5 131433 BLACK LIGHT FILTER CENTER ASSY. (PACK OF 3), EDGE-13HC

6 131431 UV-A CENTER LENS (PACK OF 3), EDGE-13HC

7 130198 CONNECTOR PLUG

8a 130155 AC CONTROL BOX W/ CONN., 120V, US CONFIG.

8b 131165 AC CONTROL BOX W/ CONN., 230-240V, UK CONFIG.

8c 131164 AC CONTROL BOX W/ CONN., 230-240V, AU CONFIG.

8d 131166 AC CONTROL BOX W/ CONN., 230-240V, EU CONFIG.

8e 131163 AC CONTROL BOX W/ CONN., 220-240V, CCC CONFIG.

8f 130497 AC CONTROL BOX W/ CONN., 230V, BR CONFIG.

EDG-13HC EXPLODED VIEW

AND REPLACEMENT PARTS

ITEM PART NO. DESCRIPTION

1 131162 CLEAR GLASS FILTER ASSEMBLY WITH GASKETS

2 131434 MASK SPACERS (PACK OF 4)

3 131432 BLACKLIGHT FILTER ASSEMBLY (PACK OF 10)

4 131430 UV-A LENS (PACK OF 10)

5 131433 CENTER BLACKLIGHT FILTER ASSEMBLY (PACK OF 3)

6 131431 CENTER UV-A LENS (PACK OF 3)

8a 130155 AC CONTROL BOX W/ CONN., 120V, US CONFIG.

8b 131165 AC CONTROL BOX W/ CONN., 230-240V, UK CONFIG.

8c 131164 AC CONTROL BOX W/ CONN., 230-240V, AU CONFIG.

8d 131166 AC CONTROL BOX W/ CONN., 230-240V, EU CONFIG.

8e 131163 AC CONTROL BOX W/ CONN., 220-240V, CCC CONFIG.

8f 130497 AC CONTROL BOX W/ CONN., 220-240V, BRAZIL CONFIG.

Replacement Parts

The Clear Glass Filter Assembly comes with two gaskets.

A A

B B

WESTBURY, NEW YORK 11590

956 BRUSH HOLLOW ROAD

CORPORATION

SPECTRONICS

REV

DRAWING NUMBER

SIZE

DATE

APPROVED

CHECKED

DRAWN

TITLE

NEXT ASSY.

NO. REQ'D

SCALE

30'

.005

ANG.DEC.

UNLESS OTHERWISE SPECIFIED

DIMENSIONAL TOLERANCES

FRAC.

1/64

- -

MATERIAL FINISH SPECTRONICS PART NO.

A-18126

PHILIP C

8/20/2018

C:\Engineering\Projects\EDGE LAMPS\A-18126, EDGE-13HC, ASSEMBLY, MANUAL.idw

NA NA

DISCLAIMER NOTICE

This drawing is the property of Spectronics Corporation.

It contains confidential and proprietary information that

cannot be reproduced or divulged, in whole or in part,

without prior written authorization from Spectronics' Engineering

Department. All technical information on this drawing is for

informational purposes only, and is provided in confidence for

mutual assistance. It may not be used to manufacture anything

without prior written authorization from Spectronics' Engineering

Department.

EDGE-13HC,

MANUAL

EDG-13HC

1 3

EDGE-13HC REPLACEMENT PARTS

ITEM PART NO. DESCRIPTION

1131162 CLEAR GLASS FILTER ASSY. W/ GASKETS

2 131434 MASK SPACERS (PACK OF 4)

3 131432 BLACK LIGHT FILTER ASSY. (PACK OF 10), EDGE-13HC

4 131430 UV-A LENS (PACK OF 10), EDGE-13HC

5 131433 BLACK LIGHT FILTER CENTER ASSY. (PACK OF 3), EDGE-13HC

6 131431 UV-A CENTER LENS (PACK OF 3), EDGE-13HC

7 130198 CONNECTOR PLUG

8a 130155 AC CONTROL BOX W/ CONN., 120V, US CONFIG.

8b 131165 AC CONTROL BOX W/ CONN., 230-240V, UK CONFIG.

8c 131164 AC CONTROL BOX W/ CONN., 230-240V, AU CONFIG.

8d 131166 AC CONTROL BOX W/ CONN., 230-240V, EU CONFIG.

8e 131163 AC CONTROL BOX W/ CONN., 220-240V, CCC CONFIG.

8f 130497 AC CONTROL BOX W/ CONN., 230V, BR CONFIG.

The primary power cord to the AC control box and the secondary power cord

that attaches to the EDGE™ 13 lamp are both 8 feet (2.4 meters) in length.

Note: The part number for the Gangable Cord can be found on the following

page, listed underneath the ACCESSORIES section. Additional protective face

and eyewear options are available as well.

8a-8f

ACCESSORIES

Spectacles, UV-Absorbing............................UVS-30

Goggles, UV-Absorbing..............................UVG-50

Face Shield, UV-Absorbing ..........................UVF-80

Gangable Cable with Connectors .....................130156

TECHNICAL SPECIFICATIONS

Unit Weight: 14 lbs (6.35 kg)

Unit Dimensions: 11” x 14” x 9”

Light Source: 13 UV-A LEDs

Wavelength: UV-A (365 nm)

ELECTRICAL SPECIFICATIONS

Input: 100-240V, 50/60Hz

Output: DC 50V, 500mA

POWER SPECIFICATIONS AND INTERNATIONAL MODELS

EDG-13HC - 120V with US Plug

EDG-13HC/F - 230-240V with European Plug

EDG-13HC/FA - 230-240V with Australia Plug

EDG-13HC/FB - 230-240V with UK Plug

EDG-13HC/FC - 220-240V with China Plug

EDG-13HC/FBR - 220-240V with Brazil Plug

www.Spectro-UV.com

4 Dubon Ct., Farmingdale, NY 11735

866-230-7305

MANUEL D’UTILISATION

www.Spectro-UV.com

4 Dubon Ct., Farmingdale, NY 11735

866-230-7305 7/20 AM18065ML-3

Imprimé aux États-Unis

EDG-13HC

EDGE™13

Projecteur d’inspection LED UV-A

ENG - 1 FR - 9 ES - 17 DE - 25

PRINCIPALES CARACTÉRISTIQUES EDG-13HC:

• Intensité nominale à l’état stationnaire de 8 500µW/cm2à 38 cm (15").

• Grande zone de couverture de 61 x 55,9 cm (24 x 22") avec une intensité UV-A

minimale de 1 000µW/cm2.

• Émissions de lumière visible inférieures à 11lux (1.0 lm/ft2).

• Lentilles UV-A de longue durée.

• Filtres de lumière noire inclus.

• Conception sans dégagement de chaleur et sans ventilateur.

• Plusieurs appareils peuvent être groupés en utilisant une seule source d’énergie.

• Support de montage réglable.

• Indice IP65 : Les lampes de la série EDGE™ 13 sont totalement protégées de la

pénétration de poussière et de jets d’eau à basse pression (venant de toutes les

directions). Pour plus de détails, consultez EN 60529

(norme britannique BS EN 60529:1992, norme européenne CEI 60509:1989).

• L’EDGE™ 13 est conforme aux normes CE, CCC, RoHS et WEEE. Conforme aux

normes EN ISO 3059 pour le contrôle non destructif.

• Certicat de conformité (ASTM E3022-18) inclus.

PREMIÈRE UTILISATION

• L’intensité du projecteur EDGE™ 13 LED UV-A est réglée en usine avant l’envoi an

de garantir une performance optimale lors des inspections.

• Déballez soigneusement la lampe et inspectez-la pour déceler d’éventuels

dommages survenus pendant le transport. Si un dommage est constaté, avertissez

immédiatement le transporteur et le fournisseur avant d’essayer d’utiliser la lampe.

• E󰀨ectuez des tests dans une zone sombre pour obtenir la meilleure réponse

uorescente.

• Assurez-vous que l’interrupteur d’alimentation est en position OFF avant de brancher

l’appareil dans une prise mise à la terre. Les lampes EDG-13HC sont équipées d’un

interrupteur à bascule à deux positions (O pour arrêt et I pour marche).

• Poussez l’interrupteur d’alimentation en position ON. Le fonctionnement instantané

permet à chaque LED UV-A d’atteindre très rapidement son intensité maximale.

Vériez que l’appareil fonctionne de manière optimale.

UV DANGER

Cette lampe émet des rayons ultraviolets (UV). Évitez toute exposition à ses rayons.

EXCLUSIVEMENT DESTINÉ À UNE UTILISATION PAR DES PROFESSIONNELS

Altri manuali per Spectroline EDGE 13

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Spectro-UV Proiettore

Spectro-UV

Spectro-UV EDG-13H Manuale utente

Spectro-UV

Spectro-UV Spectroline EDGE 13 Manuale utente

Spectro-UV

Spectro-UV Spectroline EDGE 13 Manuale utente

Spectro-UV

Spectro-UV Spectroline EDGE Series Manuale utente

Spectro-UV

Spectro-UV Spectroline EDGE 13 Manuale utente

Manuali Proiettore popolari di altre marche

VIZULO

VIZULO Micro Martin Guida utente

EuroLite

EuroLite LED IP FL-100 SMD Manuale utente

Cooper Wheelock

Cooper Wheelock XB12 Manuale utente

Allen + Roth

Allen + Roth 17624-000 Manuale utente

ADJ

ADJ 4 STAGE PAK Manuale utente

Cooper Lighting

Cooper Lighting EGL91SW233 Manuale utente

Max

Max 37496 Manuale utente

BEGA

BEGA 85 143 Manuale utente

Beamz

Beamz 151.226 Manuale utente

EuroLite

EuroLite LED IP FL-8 Manuale utente

Ledj

Ledj PERFORMER 36 RGB Manuale utente

Perel

Perel ELS3 Manuale utente

Perel

Perel ELS3WD Manuale utente

LumX

LumX LM 36130 Manuale utente

Xtricity

Xtricity 4-80053 Manuale utente

Stahl

Stahl 6521/4 Series Manuale utente

Ecosense

Ecosense EcoSpec Manuale utente

Ayrton

Ayrton minipanel FX Manuale utente