Spectrum King LowPro Veg Manuale utente
LowPro Veg/Flower
PRODUCTS
MANUAL
WWW.SPECTRUMKINGLED.COM 888.654.0737 7751 ALABAMA AVE. #1, CANOGA PARK, CA 91304
Low Pro Veg & Flower
Parts and Tools Required for Assembly.
A. LED Bar
B. Power Supply and Center Segment Of H Frame
C. Channel Without Connectors
D. Channel With Connectors
E. Cahnnels covers
F. Bar Screws
G.Frame Screws
ABCD E
GF
SPECTRUMKINGLED.COM
888.654.0737
Assembling The H Frame
Parts Needed B, C, D, E
Take off the covers from parts Cand D
Take parts B, Cand Dand lay them flat on the floor as shown in Figure #1.
Take x4 GFrame Screws and screw them in with a Philips screw driver.
*Please note the screw head must face down as shown in figure #2*
*Make sure the orientation of the frame is pointing outward as shown in Figure #2*
Figure #1
Figure #2
SPECTRUMKINGLED.COM
888.654.0737
Connecting The Bars To The Frame
Lay down all the bars Awhile the LEDs on the bars face the floor
Attach the H frame to the bars using x2 Fscrews per bar
*Make sure the holes on channels are facing up*
Close channels Cand D using the E covers
C
D
SPECTRUMKINGLED.COM
888.654.0737
Questo manuale è adatto per i seguenti modelli
1
