Spedal FF931 Manuale utente
002B1C15-EN
FF931
USER MANUAL
4K AI Noise-Reduction
Conference Webcam
CONTENTS
1. DISCLAIMER AND SAFETY GUIDELINES... 01
1.1 Disclaimer ........................................................ 01
1.2 Safety Guidelines ............................................. 02
2. INSTALLATION .............................................. 04
2.1 In the Box ......................................................... 04
2.2 Product Diagram .............................................. 05
2.3 Installation ........................................................ 07
3. CONNECTION................................................ 08
3.1 Windows System Settings................................ 08
3.2 Mac OS X System Settings.............................. 13
4. SOFTWARE ................................................... 15
5. APPENDIX...................................................... 16
5.1 Frequently Asked Questions ............................ 16
5.2 Specification..................................................... 18
5.3 Warranty........................................................... 18
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
1. DISCLAIMER AND SAFETY GUIDELINES
1.1 Disclaimer
This product is a premium 4K resolution AI denoising webcam for confer-
ences, which will bring you pleasant experience in stable and high-quality
video transfer and production when the connection is working properly and
the components are not damaged. Please pay special attention to the
cautions and warnings in this User Manual. You can visit our homepage
http://spedal.cc to get relevant files of this product, including this User
Manual, the Webcam Expert software (Mac and Windows versions) and its
manual, or learn more about other products. Shenzhen Xinzhuang Gude
Technology Co. Ltd. (Spedal) reserves the right to update this User Manual.
The information in this document affects your safety, legal rights and respon-
sibilities. Read this entire document carefully to ensure proper configuration
before use. Failure to follow the instructions and warnings in this document
may result in product damage or other possible injury or loss. You must
strictly follow Spedal's guidelines to install and use the product, and never
use non-standard parts. Before assembling, setting up and using, be sure to
carefully read all the instructions and warnings in this document. This product
is not a toy. Please do not allow children to touch this product or its parts and
wires. Please be careful when operating in scenes where children are
present.
By using this product, you hereby signify that you have read this disclaimer
carefully and that you understand and agree to abide by the terms and
conditions herein. The user promises to be responsible for his actions and all
consequences arising therefrom. The user promises to use this product only
for legitimate purposes, and agrees to all the terms and contents of this
document and any related policies or guidelines that Spedal may formulate.
You understand and agree that in the absence of videos or photos, Spedal
may not be able to analyze the cause of your product damage or accident,
and cannot provide you with after-sales service such as warranty.
Spedal is not responsible for all losses caused by the user's failure to use the
product in accordance with this User Manual.
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
● Do not install or operate the device with wet hands to avoid accidents;
● Do not install the device in strong magnetic, high temperature places;
● Do not install the device in humid, flammable, explosive gas / liquid
places;
● Do not use sharp objects to poke the device and any accessories;
● Do not disassemble, repair or modify the device and its accessories by
yourself;
● Please place the device out of reach of children during installation and
use;
Note: Please strictly abide by the above warnings. Our company is not responsible
for any product failure or personal injury caused by violation of the above warnings.
1.2 Safety Guidelines
1.2.1 Warnings
In compliance with laws and regulations, Spedal reserves the right of final
interpretation of this document and all related documents of this product. If
the manual is updated, revised or terminated, we will not notify you separate-
ly. Please visit the official website of Spedal for the latest product information.
Spedal is a trademark of Shenzhen Xinzhuang Goodo Technology Co. Ltd.
and its affiliates. The product names, brands, etc. appearing in this article are
all trademarks or registered trademarks of their respective companies.
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
● Do not touch the lens directly with your hands, so as not to leave dirt or
prints on it;
● Do not use rough cloth or paper to clean the lens, so as not to damage
the lens;
● Do not use abrasive / corrosive solutions to clean the lens, so as not to
damage the lens;
● When cleaning the lens, please use dedicated lens cleaning solution
and cloth only;
● Do not use a power supply higher than the rated power to supply power
to the device, otherwise the device will be damaged;
● Please make sure that the camera has been fixed on the screen or
tripod before use to prevent the device from falling;
● Please avoid super bright light or dark environment when using, to
ensure the normal performance of the camera dynamic range;
● When using, please make sure that there are no other obstructions in
front of the infrared signal receiver of the webcam or the Infrared
transmitter of the remote control.
1.2.2 Cautions
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
Note: The camera USB cable is 1.6 meters long. If the length is not enough, please
use a Type-A USB 2.0 HUB extension cable. If your computer only has a Type-C
socket, please use a Type-C to Type-A conversion connector. Do not disassemble
and replace USB cables of other lengths or replace cables of other sockets by
yourself. Product damage caused by the user's disassembly and replacement of
equipment accessories is not covered by the warranty.
2. INSTALLATION
2.1 In the Box
Before using this product, please check whether the product package
contains all of the following items. If anything is missing, please contact
Spedal or your local agent.
● Webcam ● Tripod
● Remote control ● Lens cloth, Quick Guide
FF931
USER MANUAL
4KAI Noise-Reduction
Conference Webcam
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
2.2.2 Tripod
Angle adjustment lever
Tripod connection screw
Angle adjustment lock
Extendable legs
Note: When using the camera, please make sure that there is nothing in front of the
infrared signal receiver to block the infrared signal of the remote control to ensure
the function of the remote control.
2.2 Product Diagram
2.2.1 Webcam AI-denoising Mic
4K Ultra HD fixed focus
120° wide angle lens
Indication lightInfrared signal receiver
USB cable
Tripod screw hole
Screen support
Screen hook
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
Note: Please make sure to direct the remote control towards the camera for button
operation. When removing the battery slot of the remote control, press the left dial of
the battery slot to the right, and then pull the battery slot out. The remote control uses
CR2025 3V lithium coin cell battery for power supply. Please use a battery of this
specification that meets the standard for power supply for this remote control.
2.2.3 Remote control
2.2.4 Lens cloth, Quick Guide
Infrared transmitter
Zoom in / out
Brightness
Disable Mic
Battery slot
FF931
USER MANUAL
4K AI Noise-Reduction
Conference Webcam
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
Note: No matter what method you use to install the camera, please make sure that
the camera is in a balanced state to prevent the camera from being unbalanced and
falling during use.
The USB port of this product needs to be plugged into the USB port of the
computer to connect the camera and the computer. The product itself can be
hung on the computer screen or used with a tripod. as the picture shows:
2.3 Installation
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
1. Right-click "Start" and select "Device Manager";
2. Pull down "Sound, Video and Game Controller", if it displays "Spedal 4K
Camera Mic", the connection is successful;
3. Pull down "Audio Input and Output", if it shows "Spedal 4K Camera
Mic", then connect to 4. Pull down "Camera", if it shows "Spedal 4K
Camera", then the connection is successful.
3.1.2 Check
3. CONNECTION
This product is a plug-and-play webcam, you don't need to set any settings to
use this product theoretically. But if your computer has multiple audio and
video input devices (including the computer's built-in camera and internal and
external microphones), you may need to configure settings in your computer
or software to ensure that this product is an input device when you use it for
the first time. We strongly recommend that you, if your computer allows it,
please select this product as the default device in the system settings or
software settings to facilitate your daily use.
3.1 Windows System Settings
This Spedal 4K Camera is compatible with most Windows operating
systems, including Windows XP SP2, Windows 7, Windows 8, Windows 10,
etc. After connecting the USB port of the camera to the computer, the camera
is in a callable state without downloading additional drivers.
3.1.1 Installation
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
Indice
Altri manuali Spedal Webcam
