6
CL & PSL50 Series
SERVICE OVERVIEW
Biannual service tasks Biannual service required equipment
The service tasks listed below are to be done on an annual basis to guarantee good
dispenser functionality and maintain warranty compliance. Step-by-step instructions
are provided on the following pages.
• Clean canisters, canister outlets
• Clean spout adaptor, mixers, Black Coffee Kit
• Clean air channel, replace air lters
• Clean espresso brewer
• Install espresso brewer service kit
• Reassemble espresso brewer
• Drain boiler
• Clean monobrewer
• Install monobrewer service kit
• Reassemble monobrewer
• Clean bean hopper
• Clean grinder, replace outlet
• Replace grinder soft ring, adjustment ring
• Replace extractor fan
• Replace fast mixer motor assembly
• Replace overpressure valve
• Replace inlet valve
• Clean dispenser interior
• Reinstall bean hopper
• Reinstall air channel and lters
• Reinstall spout adaptor, mixers, Black Coffee Kit
• Reinstall canisters
• Reinstall espresso brewer
• Reinstall monobrewer
Important:
The Biannual Service (24 month service tasks) shall only be performed by a
trained technician using all required safety equipment as outlined during the
training session(s) and service kits from the original equipment manufacturer.
The following cleaning equipment/consumable items are required to perform the
biannual service tasks.
• Door key
• Cleaning cloth/sponge
• Mild kitchen cleaning spray
• Service access code (available from the service technician or distributor)
• Air lter material (PN10034178)
• Fast mixer unit* (PN10032974)
• Mixer bracket assembly (PN10011038)
• Spout adaptor (PN100166133 and PN10009288)
• Espresso Service Kit*(PN10021379)
• Monobrewer Service Kit*(PN10037202 for coffee or PN10037220 for tea)
• Overpressure Valve (PN10024356)
• Non-return valve (PN100246950)
• Grinder outlet* (one per grinder - PN10031032)
• Grinder soft ring*(one per grinder - PN10032591)
• Grinder adjustment ring*(one per grinder - PN10031008)
• Extractor fan (PN10013350)
• Ingredient canisters and outlet chutes (see below for part numbers)-
CL22: PN1003379 (1pcs) + PN10033780 (1pcs) + PN1009619 (2pcs)
ES12B: PN10009570 (1pcs) + PN10009705 (1pcs) + PN1009619 (2pcs)
ES13: PN10009562 (1pcs) + PN10009563 (1pcs) + PN10009705 (1pcs) +
PN1009619 (3pcs)
FBT14: PN10009562 (1pcs) + PN10009563 (1pcs) + PN10009567 (1pcs) +
PN10009704 (1pcs) + PN1009619 (4pcs)
Items marked with a “*” are only required if the dispenser is equipped with the
applicable system.
