Sphere Alarm SPH010442 Manuale utente
Sphere Alarm System:
Pet Immune Motion Detector User Guide
SPH010442
Pet Immune Motion Detector
Introduction
This sensor is meant to be mounted in a room to detect human motion. The device
detects human body movement via its infrared sensor and sends a signal to the Base
Unit. You can either use the adhesive backing or drill holes in the wall for use with the
included anchors and screws. Place the Motion Detector sensor as high up in the room
as it can go-preferably 7 to 8 feet (2 - 2.5 m). The mount should be level and the detection
window turned to capture most of the room. If the room is smaller, the sensor will
not need to be placed as high on the wall. If placing the detector in a room with many
windows, you shouldn’t face the detection window directly towards them.
Included
• Motion detector
• Mounting bracket
• Adhesive strip
• 2 screws
• 2 wall anchors
• 2 AA batteries
2
3.9 6 10.4 15
4m
2.1m
15m2.1 3.1 5.9
3.9 6 10.4 15
4m
2.1m
15m2.1 3.1 5.9
Magnetic SliceDetection Window
Stainless-Steel Bead
Bracket
LED Indicator
Infrared sensor
On/O Switch
AA 1.5V
AA 1.5V
Detect-Interval
Time Setting Switch
(every 5 secs or 5 mins)
Inside View
Pairing with the Base Unit
• Scan the QR code printed on the sensor.
• Pairing is confirmed in the app.
Installation
• Open the case and remove the battery’s insulating strip.
• Pair with the base station using the Sphere Alarm app.
• Fix the bracket with screws to a wall, connect the sensor to bracket, adjust
at a proper angle.
• Install at a height of 5.9 - 7.9 ft. (1.8 - 2.4 m) from ground.
Make sure to avoid installing near stairs or an exit where a pet frequently passes through.
Avoid installing the sensor near a door, air-conditioner, in direct sunlight, by
a heat source or under rotating objects like a fan.
Positioning the Motion Detector
3
Operating Instructions
Place detector
7 - 8 feet high
(2 - 2.5m)
(Do not angle the detector downwards.)
Side View
4
Product Testing
• Power on, LED indicator flashes for a second. It then takes about 30 seconds
for self-check.
• Tester should walk in the detecting area parallel to the wall where the sensor
is installed.
Please install and use the sensor according to this manual. Don’t touch the surface of the sensor to avoid
affecting its sensitivity. If cleaning is needed, shut off the power and use a soft cloth with a little alcohol. To
ensure the sensor is working normally once power is resumed, do the walking test again. It is best to test the
sensor weekly.
Overhead View
windows
door
Operating Instructions
Positioning the Motion Detector
Working Voltage
Battery
Working Current
Standby Current
Detection Range
Detection Distance
Pet type that shouldn’t set off detector
Transmission Distance
Transmission Frequency
Working Temperature
Humidity
Weight
Dimensions ( L x W x H )
DC 9V
2 × AA battery (1.5V)
≤15mA
25μA
100°
39- x 39 ft.(12- x 12 m)
Weight ≤ 44 lbs. (20 kg)
656 ft. (200 m) without obstacles
433.92 MHz
14°F~122°F (-10°C~ 50°C)
≤95%rh (non-condensing)
2.3 oz. (66 g) or 4 oz. (112 g) with batteries, 2.2 oz. (62.3 g) for bracket
3.9˝x 2.1˝x 1.6˝ (10 x 5.4 x 4 cm)
Specifications
5
1 2
Replacing the Batteries
AA 1.5V
AA 1.5V
Press down the hook on sensor with
thumb and push to open the cover. Replace with 2x AA batteries.
6
Help & Warranty Info
Thank you for purchasing a Sphere Alarm product!
We appreciate your business and strive to make
your experience the best possible.
If you have any issues with your product,
please contact us at:
support@spherealarm.com
Warranty Info
This Limited Warranty applies to physical goods sold by Sphere
and lasts for a period of one year from the date of sale of the device.
This Limited Warranty covers any manufacturing defects to the device or accessories
encountered by normal use. This warranty does NOT cover damages resulting from
improper use of the device (including the use of incompatible accessories such as
chargers, storage devices, etc.), unauthorized modifications to the device, negligence, or
from any environmental or natural disasters, or from loss or theft. This warranty requires
proof of sale of the device from Sphere or from approved resellers only.
Devices that are covered will be repaired or replaced at Sphere’s discretion. Devices
requiring replacement will be fulfilled with a new or refurbished unit, or a similar unit if
the original unit is no longer available.
To take advantage of our warranty, please go to:
http://www.spherealarm.com/return-policy/
7
Sphere Alarm is a registered trademark of Sphere, 2019. All rights reserved.
FCC Regulation
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This product can be used across EU member states.
We declare that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
FCC Approval Number: 2AS7G-SPH010442
Indice
Altri manuali Sphere Alarm Sensore di sicurezza
