Spinning SPINPower Studio Crank Manuale utente
PERFORMANCE CRANK
OWNER’S MANUAL
CONTENTS
The SPINPower® Performance Crank 4
What’s Inside 5
SPINPower® Performance Crank Feature 6
Checking or Replacing the Batteries 7
Pairing the SPINPower® Performance Crank 8
Removing your Existing Crank and Pedal 9
Installing your SPINPower® Performance Crank 13
Care and Maintenence 14
Frequently Asked Questions 15
Warranty Information and Customer Support 17
Thank you for purchasing the SPINPower® Performance
Crank. Power measurement is a key component of the
SPINPower® program that was developed by the lead-
er of the indoor cycling world: Spinning®. This crank
will measure a rider’s eort and is designed to be com-
patible with Bluetooth® and ANT+ devices to provide a
rider with real (and not estimated) power measurement.
This crank is also compatible with many popular
cycling apps and games.
This owner’s manual will explain all of the key features
of this crank as well as take you through each step of
installing the crank onto your consumer Spinner® bike.
Be sure to log on to spinning.com for all of the latest
updates and information about SPINPower® and the
Spinning® program.
©2018 Mad Dogg Athletics, Inc. All rights reserved.
Spin®, Spinner®, Spinning®, Spin Fitness®, SPINPower® and the Spinning logo
are registered trademarks that are owned by Mad Dogg Athletics, Inc.
4
THE SPINPOWER® CRANK
www.spinning.com 800.847.SPIN (7746)
SPINPOWER® STUDIO CRANK OWNER’S MANUAL
WHAT’S INSIDE
1. SPINPower® Crank
2. CR 2032 coin cell battery (pre-installed)
3. Crank bolt cover (plastic)
4. SPINPower® decal
5
Tools Needed for Installation
1. Spinning® or Park CWP-7 crank removal tool.
2. Corresponding wrench to fit the crank removal tool.
3. 14 mm socket wrench for the crank bolt.
4. 15mm open end (pedal) wrench for removal of the pedal
5. White lithium grease or light oil.
General
Rugged proprietary steel crank design with an
integraged power sensor.
Dual mode design allows for compatibility with both
ANT+ and Bluetooth devices.
“No tool” sealed rotational battery cover allows for
simple battery changes when necessary.
Powder coated finish for durability.
Specifications
Compatible only with consumer Spinning® bikes.
More specifically, compatible with all Active and
Performance line bikes manufactured after 3/2018.
which include the Active bikes – A1, A3, A5 and the
“25th Year Anniversary” Johnny G. Spinner®.
Performance line bikes include the P1, P3 and P5.
Powered by one CR2032 coin cell battery.
Compatible with ANT+ (Studio SpinPower®
Computer) and Bluetooth Smart devices (smart
phones, tablets, smart TVs).
D powermeter technology (patent pending)
measures tri-axial strain on your crank arm for
accurate, consistent data.
Data accuracy: +/- 1% error margin.
Crank calibration is supported by the SPINPower®
Crank Connect App which is available in the IOS and
Android stores.
6
FEATURES
www.spinning.com 800.847.SPIN (7746)
SPINPOWER® STUDIO CRANK OWNER’S MANUAL
CHECKING OR REPLACING
THE BATTERY
Your crank comes from the factory with the battery
already installed. Use these instructions for checking or
replacing the battery.
NOTE: Initially you do not need to remove the battery
unless you are replacing it.
1.
Turn the crank over to see the power pod on the backside
of the crank. Note the grip tabs and the lock and
unlock icons.
2. Twist the battery cover door counter clockwise to
reveal the battery compartment. Note the orientation of
the CR2032 coin cell battery. Place the cover back on
and twist clockwise until the cover is fully closed (as
indicated by the lock icon).
7
PAIRING THE CRANK
Your crank is designed to pair with a wide variety of
devices that receive signals in either ANT+ or Blue-
tooth formats. The crank is equipped with a motion
sensor that will turn it on while the crank is rotating
making an on/o switch unnecessary. Once the crank
is rotated it will take a few seconds for the signal to
activate your display device.
If you are pairing this for the first time to the Studio
SPINPower® computer, we suggest you pair the crank
before installing it on your Spinner® bike. The instruc-
tions for this pairing are included in the SPINPower®
Computer box.
Each crank has a unique 5-digit identification code.
That code can be used as a unique identifier when
pairing to an app or display device. Some display
devices will show that number when initial pairing
occurs. For reference, the 5-digit number is located
on top portion of the pod on the back as shown.
8
www.spinning.com 800.847.SPIN (7746)
SPINPOWER® STUDIO CRANK OWNER’S MANUAL
REMOVING YOUR
EXISTING CRANK
You must remove your existing crank before installing
your new SPINPower® crank. To do so, you need a
14mm socket wrench as well as a heavy duty crank
removal tool. (SPINTech® tool by Spinning®, Park
CWP-7 Tool or equivalent available on Spinning.com).
Keep the crank from rotating during installation.
Before starting, place the crank in an easily access-
able location for both crank bolt and pedal. Then turn
the resistance knob clockwise until the flywheel and
crank are locked.
Remove the pedal.
1. Use a 15mm open end pedal wrench. Place the
wrench on the flats of the pedal axle as shown
(between the pedal body and the crank). Make sure
that the wrench is on securely. It will help to place
the wrench in a way that gravity will help you turn
the wrench clockwise (next step).
9
REMOVING YOUR
EXISTING CRANK (continued)
2. While facing the crank (on the left side of the bike),
turn the wrench so that it is rotating over the top
towards the back of the bike (clockwise). This is a
special left-hand thread and is loosened by turning
“over the top” towards the back of the bike. it is VERY
IMPORTANT that you loosen the pedal by turning the
wrench clockwise.
3. Set the pedal aside and proceed to the next step
of removing the crank.
Remove the crank.
4. Remove the plastic dustcap by using your fingers
to pry it away from the crank.
10
Altri manuali per SPINPower Studio Crank
1
Indice
Altri manuali Spinning Accessori per biciclette
