Spinning Studio Console Manuale utente
OWNER’S MANUAL
SPINNING®
STUDIO CONSOLE
Edition Information
Spinning®Studio Console Owner’s Manual
Copyright ©December 2015 Precor Incorporated. All rights reserved.
Specifications subject to change without notice.
Trademark Notice
Precor is a registered trademark of Precor Incorporated. Other names in
this document and all documents included in this purchase may be the
trademarks or registered trademarks of their respective owners.
The Spinner Family of Marks—Spin®, Spinner®, Spinning®, Spin Fitness®,
and the Spinning logo ® are registered trademarks owned by Mad Dogg
Athletics, Inc., a California corporation.
ANT, ANT+ and the ANT+ logo are trademarks of Dynastream® Innovations
Inc., a subsidiary of Garmin® Ltd.
SPD is a registered trademark of Shimano American Corporation.
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202
Woodinville, WA 98072-4002
www.precor.com
Important Safety Information
Important Save these instructions for future reference.
Read all documentation provided with your bike, including assembly,
maintenance, and getting started, before using this bike.
Note This product is intended for commercial use.
WARNING To prevent injury, the console must be attached securely
to the base unit following all assembly and installation
instructions. The console is intended for use only with
Precor fitness equipment, not as a standalone device.
Safety Precautions
Always follow basic safety precautions when using this bike to reduce the
chance of injury, fire, or damage.
Owner Instructions
• Use the bike only for its intended purpose as described in this manual.
Do not use accessory attachments that are not recommended by Precor.
Such attachments may cause injuries.
• Assemble and operate the bike on a solid, level surface.
• Spacing: These minimum spacing recommendations are based on a
combination of the ASTM (U.S.) voluntary standards and EN (European)
regulations as of October 1, 2012, for access, passage around, and
emergency dismount: a minimum of 0.5 m (19.7 in.) on at least one side,
and 0.5 m (19.7 in.) behind or in front of the bike.
• Consider carefully the requirements of the Americans with Disabilities
Act (ADA), US Code 28 CFR (see Section 305). ASTM standards
are voluntary and may not reflect current industry standards.The
actual area for access, passage around, and emergency dismount is
the responsibility of the facility.The facility should consider the total
space requirements for training on each unit, voluntary and industry
standards, and any local, state, and federal regulations. Standards and
regulations are subject to change at any time.
Important These spacing recommendations should be used when
positioning bike away from sources of heat, such as radiators, heat registers,
and stoves.Avoid temperature extremes.
• Do not operate the bike where aerosol (spray) products are being used
or where oxygen is being administered.
• Maintain the bike to keep it in good working condition, as described
in the this manual. Inspect the bike for incorrect, worn, or loose
components, and then correct, replace, or tighten prior to use.
• If you plan to move the bike, obtain help and use proper lifting
techniques.
• Do not attempt to service the bike yourself, except to follow the
maintenance instructions in this manual.
Owner and User Instructions
Before beginning any fitness program, you should obtain a thorough medical
exam from your physician, particularly if you have high blood pressure, high
cholesterol, or heart disease; have a family history of any of the preceding
conditions; are over the age of 45; smoke; are obese; have not exercised
regularly in the past year; or are taking any medication.
When using exercise bike, you should always take basic precautions,
including the following:
• Read, understand, and test the emergency stop procedures before use.
• Do not allow children, or people unfamiliar with the operation of this
bike, on or near it. Do not leave children unsupervised around the bike.
• Do not allow children under the age of 16 to use the Spinner bike.
• For commercial bikes:
Release all tension from the resistance knob after each use to allow
for perspiration to evaporate. If bikes are used in a class setting, the
instructor should direct class participants to release all tension from
the resistance knob after each use.
• For bikes used in a home setting:
Wipe down the bike after each use. Pay special attention to the area
under the resistance knob. When done, turn the resistance knob
clockwise (+) to put tension on the flywheel so that the pedals do not
rotate freely.
• When the bike is not in use, always keep some resistance on the
flywheel.
• Care should be taken when mounting or dismounting the bike.
• You must gradually slow your pedal strokes to slow the bike. To stop
immediately, firmly press down the resistance knob. Do not dismount
the bike until the pedals and flywheel have come to complete stop
and there is resistance on the flywheel. Failure to follow these safety
instructions can result in serious personal injury.
• Hold onto a handlebar while assuming the starting position on the bike.
• Face the console and do not lean on or pull on the console at any time.
• Do not use outdoors.
• Heart rate monitors are not medical devices. Various factors, including
the user’s movement, may aect the accuracy of the heart rate
readings. The heart rate monitors are intended only as exercise aids in
determining heart rate trends in general.
• Hold on to the handlebar with one hand whenever you operate the
console keys with the other hand.
• Never turn the crank arms by hand.
• Never drop or insert objects into any opening. Keep hands away from
moving parts.
• Do not set anything on the handlebars, control console, or covers. Place
liquids, magazines, and books in the appropriate receptacles.
• Weight Restriction: Refer to your bike manual for weight restrictions.
• Practice riding the bike using all hand positions and the standing
position before you attempt to ride at higher speeds.
• Wear proper exercise clothing and shoes for your workouts and avoid
loose or dangling clothing. Tie long hair back. Do not wear shoes
with heels, and check the soles of your shoes to remove any dirt and
embedded stones.
• If your foot comes out of the toe strap or toe clip, firmly press down
the resistance knob to stop the flywheel and pedal motion before you
reposition your foot and tighten the toe straps or reposition your shoe in
the toe clip.
Regulatory Information
Hazardous Materials and Proper Disposal
The batteries within self-powered equipment contain materials considered
hazardous to the environment. Federal law requires proper disposal.
Product Recycling and Disposal
This equipment must be recycled or discarded according to applicable local
and national regulations.
Product labels, in accordance with European Directive 2002/96/EC
concerning waste electrical and electronic equipment (WEEE), determine
the framework for the return and recycling of used equipment as applicable
throughout the European Union. The WEEE label indicates that the product
is not to be thrown away, but rather reclaimed upon end of life per this
Directive.
In accordance with the European WEEE Directive, electrical and electronic
equipment (EEE) is to be collected separately and to be reused, recycled, or
recovered at end of life. Users of EEE with the WEEE label per Annex IV of
the WEEE Directive must not dispose of end of life EEE as unsorted municipal
waste, but use the collection framework available to customers for the return,
recycling, and recovery of WEEE. Customer participation is important to
minimize any potential eects of EEE on the environment and human health
due to the potential presence of hazardous substances in EEE. For proper
collection and treatment, contact Precor Customer Support.
Contents
The Spinning® Studio Console 10
Unpack the Box 11
Console Features 12
Console Setup 13
Cadence Sensor Installation 14
Pairing with your Heart Rate Belt 16
Customize Console Settings 18
Attach the Console to the Bike 21
Console Care 22
Frequently Asked Questions 23
Certifications 25
Warranty Information and Customer Support 26
10
The Spinning®Studio Console
Thank you for purchasing the Spinning® Studio Console. Heart rate training
is an essential aspect of the Spinning program and this console will help you
monitor your heart rate, cadence, time, distance and calories burned on every
ride. This manual explains the key features of this console, as well as the steps
for installing the console onto your Spinner® bike. Be sure to log on to www.
spinning.com for the latest updates and information from Spinning.
Enjoy the ride!
Indice
Manuali Cassetto LCD popolari di altre marche
Acnodes
Acnodes KD 8228 Manuale utente
Ameriwood
Ameriwood 9524328PCOM Manuale utente
Kesseböhmer
Kesseböhmer TANDEM solo Manuale utente
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manuale utente
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manuale utente
NTI
NTI RACKMUX-V17-N Manuale utente
GRASS
GRASS DWD XP Manuale utente
StarTech.com
StarTech.com DuraView RACKCONS1701 Manuale utente
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manuale utente
Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manuale utente
Fujitsu
Fujitsu RC25 Manuale utente
Acnodes
Acnodes RK 1000B Manuale utente