Spintso S1 Pro Manuale utente
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
1 (32)
Spintso Referee Watch S1 Pro
User Manual
Version 3.0
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
2 (32)
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
3 (32)
Table of Contents
2. Overview and Abbreviations
3. Start-up
4. Charging
5. Connect to app
6. General handling
7. REFEREE FUNCTIONS
8. OTHER FUNCTIONS
9. Short-cuts
10. App features
11. Properties
12. Warranty & contact
4
4
4
5
6
8
24
26
27
29
30
Please read this manual in its entirety before using your Spintso watch.
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
4 (32)
2. Overview and Abbreviations
3. Start-up
3.1. Content
The following items are included:
- Spintso referee watch S1 PRO.
- USB charging cable.
- Quick start manual & information sheet.
3.2. Peel off
Before using your new watch, please remove the screen protector and the thin transparent plastic lm
that covers the heart rate sensor.
3.3. Activation
Press and hold Button A until the bar on the screen rises to maximum. Then release the button.
Spintso logo arcs shall appear for a moment and when the clock face appears the watch is ready.
4. Charging
Connect the included charging cable between your watch and a
standard USB-A charging port. Make sure the pogo pins on the
charging clip align properly to the watch charging interface. If wet,
the watch exterior shall be wiped dry before charging.
The watch will briey light the display and indicate charging when
charging power is applied.
Charging time is up to three hours and is complete after the display
shows a fully charged battery. Press button A to see current charg-
ing status.
Button A
Button B
Heart rate
Sensor
Charging
interface
Latch for
bracelet
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
5 (32)
5. Connect to app
5.1. SMARTPhone installation
Search for “Spintso watch” on the App Store for iPhone, or on
Google Play for Android. Install Spintso App on your phone.
5.2. Connect watch
Check that Bluetooth is enabled on your phone and on your watch.
Phone: Normally a Blue Bluetooth symbol.
Watch: White ight mode symbol. (Default)
Open the Spintso watch app on your phone and select the “WATCH” tab. Then select “ADD SPINTSO
WATCH”. Wait until your Spintso watch appear in the list below and then select S1 PRO. Finally con-
rm the new pairing by selection on your watch.
The Spintso App may ask you to update the watch software. If battery status is greater than 50% you
can select yes to update.
21/12, onsdag
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
6 (32)
6. General handling
6.1. Screen wake-up
Screen is activated by either pressing button A, or by turning the wrist. The screen fades and deac-
tivates automatically after a congurable time. During fading, the screen can be tapped to keep the
screen active.
6.2. Change clock-face
Changing clock-face is made when the watch show your current clock-face. Press on the touchscreen
until the small dots appear. Swipe to the right or to the left to change between the different clock-fac-
es. Select the clock-face you prefer by pressing the screen until the the dots disappear.
6.3. Navigation from home screen
6.3.1 Settings
Spintso Classic
High Visibility Daylight
Retro
Home Settings
Swipe down to go to settings.
Return to home screen by swiping up, or by
pressing button A
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
7 (32)
6.3.2 Short-cuts
.
6.3.3 Functions
6.4. Deactivation
Select Power-Off in Settings or press and hold button A for 16 seconds to turn off the watch.
Home Referee functions Music
Heart Rate Daily health data
Return to home screen by swiping right/left, or by pressing button A
Home Functions 1 Functions 2 Functions 3
Return to home screen by swiping right, or by pressing button A
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
8 (32)
7. Referee functions
Available referee functions are Referee watch, Interval training watch, Stop-watch, and Activity record.
A function is selected by tapping on the applicable bubble.
7.1. Referee watch
The watch offers three different match clocks. Classic,
Youth and Pro. Classic is the traditional match clock
and works similar to our previous watches. Youth
is a match clock where goals and penalties can be
registered. PRO is a new advanced match clock where
Goals, cards and substitutions can be assigned to
players and registered. All matches are set individually
to prepare for three different kind of matches.
7.1.1. Match settings
Match settings can be set-up in two ways. On the watch, or from the
Spintso App.
On the watch: Touch the screen to select Match settings. Then select
CLASSIC, YOUTH or PRO.
From the app: Choose HOME tab and select “Set up match”.
All settings and how they are congured from the watch is described below..
PERIODS: Set between 1 and 9 periods. Conrm by pressing button A or cancel by swiping to the
right.
PERIOD TIME: Set individual period time between 00:00 and 99:59. (mm:ss). Conrm all period time
settings by pressing button A. Press button B, or swipe to the left to view the time of the next period.
Exit by swiping to the right.
BREAK TIME: Set individual break time between 00:00 and 99:59. (mm:ss). Conrm all break time
settings by pressing button A. Press button B, or swipe to the left to view the time of the next period.
Exit by swiping to the right.
INDICATION: Set vibration strength between 1 and 5, or off. Conrm by pressing button A or cancel by
swiping to the right.
START/STOP: This option denes how to start, pause, and restart the match with button A. Select
SHORT PRESS, LONG PRESS or DOUBLE PRESS by touching the screen. Conrm the selection by
pressing button A, or cancel by swiping to the right.
SHORT PRESS: Button A activates immediately.
LONG PRESS: Button A activates after being pressed down for 1,5 sec. (Prevents from accidental
button press).
DOUBLE PRESS: Button A activates immediately at the second press. (Prevents from accidental
button press, but the time is controlled faster compared to LONG PRESS).
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
9 (32)
GPS: Sets GPS tracking to on or off. Select ON or OFF by touching the screen. Conrm the selection
by pressing button A, or cancel by swiping to the right.
Setting GPS to OFF increases the operational time.
SCREEN: Select between ALWAYS ON, or TURN THE WRIST by touching the screen. Conrm the
selection by pressing button A, or cancel by swiping to the right.
ALWAYS ON: The screen is always active.
TURN THE WRIST: Screen fades to lowest brightness, and reactivates to the set brightness when turn-
ing the wrist, or when touching the screen. Turn the wrist option increases operational time, especially
when GPS is set to OFF.
MATCH VIEW: This option sets the preferred view during match. Select between NORMAL, HIGH
VISIBILITY or DAYLIGHT by touching the screen. Conrm the selection by pressing button A, or cancel
by swiping to the right.
NORMAL: Original Spintso design.
HIGH VISIBILITY: Easy to read font.
DAYLIGHT: White background and black text.
7.1.1.2. Additional Youth Settings
TEAM COLOUR: Select between 11 colours for the home team and guest team. Conrm each team by
pressing button A or cancel by swiping to the right.
PENALTY TIME: Set penalty time to between 00:00 and 99:59. (mm:ss). Conrm by pressing button A
or cancel by swiping to the right.
EVENT TIME: Sets if the total match time shall show in the display for three seconds when registering
an event (Goal or penalty) Select ON or OFF by touching the screen. Conrm the selection by pressing
button A, or cancel by swiping to the right.
7.1.2. Match
Touch the screen to select applicable match. CLASSIC, YOUTH or PRO
7.1.2.1. Match indications
The watch indicates all events by vibration.
SHORT vibration: 1,0 sec long. Activated at start of period and when enter/exit Youth menu. MEDIUM
vibration: 2,0 sec long. Activated when stopping the period time and when Youth penalty time is zero.
LONG vibration: 5 sec long. Activated at end of Period and at end of Break time. REMINDER vibration:
three vibrations, repeated every 10 sec. Activated after period time is stopped (Paused) during a
period.
User Manual, Spintso Referee Watch S1 PRO, vers 3.0
10 (32)
7.1.2.2. Match clocks and display indicator
Current time: Shows the real time. 12/24h format is decided by the setting in your phone.
Period time: Shows the remaining period playing time.
Period number (P): Shows the current playing period.
GPS & Battery indicator: GPS ready is indicated by green symbol. GPS not ready is indicated by
crossed through red symbol. Current battery status is indicated by the degree of ll-out of the battery
symbol.
Additional Time (+): Shows for how long the current period have been paused.
Break time (B): Shows the remaining time until the next period shall start. Only visible during break.
Counting-up time (TOT): Shows the continuous time that have passed since the current period start-
ed and it continues to count up during break time. When the next period is started, the counting-up
time is set to the sum of all previous playing periods and continue to count up.
Penalty counter (PT): Shows the oldest currently active penalty. Maximum number of penalties during
a game is nine.
Period time
Current time
CLASSIC / PRO
YOUTH
GPS & Battery indicator
Break time
Period number
Additional Time
Counting-up time
Period time
Current time
GPS & Battery indicator
Break time
Period number
Penalty counter
Penalty timer
Team colour
Team score counter
Altri manuali per S1 Pro
1
Indice
Altri manuali Spintso Orologio
