Spirent Vertex Manuale utente

Vertex®High Frequency Converter

Release 2.0

User Guide

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 2

All of the company names and/or brand names and/or product names referred to in this document, in

particular, the name “Spirent” and its logo device, are either registered trademarks or trademarks of

Spirent plc and its subsidiaries, pending registration in accordance with relevant national laws. All other

registered trademarks or trademarks are the property of their respective owners. The information

contained in this document is subject to change without notice and does not represent a commitment on

the part of Spirent Communications. The information in this document is believed to be accurate and

reliable; however, Spirent Communications assumes no responsibility or liability for any errors or

inaccuracies that may appear in the document.

Page Part Number: 71-008798, Version A1

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 3

Safety Summary

If the equipment is used in a manner not specified by the manufacturer the protection

provided by the equipment may be impaired.

Safety Symbols

The following safety symbols are used throughout this manual and may be found on

the instrument. Familiarize yourself with each symbol and its meaning before

operating this instrument.

Instruction manual symbol. The

product is marked with this symbol

when it is necessary for you to refer

to the instruction manual to protect

against damage to the instrument.

Frame terminal. A connection

to the frame (chassis) of the

equipment which normally

includes all exposed metal

structures.

Protective ground (earth) terminal.

Used to identify any terminal which

is intended for connection to an

external protective conductor for

protection against electrical shock

in case of a fault, or to the terminal

of a protective ground (earth)

electrode.

The caution sign denotes a

hazard. It calls attention to an

operating procedure, practice,

condition or the like, which, if

not correctly performed or

adhered to, could result in

damage to or destruction of

part or all of the product or

your data.

Indicates dangerous voltage

(terminals fed from the interior by

voltage exceeding 1000 volts must

be so marked).

Alternating current (power

line).

Symbol when movement with two

people is required. When this

symbol is noted on our product, two

people are required to move it

without accident.

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 4

Résumé des règles de sécurité

Si le matériel est utilisé d’une façon non conforme aux spécifications du

constructeur, la protection assurée par le matériel peut être mise en défaut.

Symboles de sécurité

Les symboles suivants sont utilisés dans tout le manuel et peuvent être trouvés sur

le matériel. Il est recommandé de se familiariser avec chaque symbole et sa

signification avant de manipuler le matériel.

Symbole « manuel d’instruction ».

Ce symbole apparaît sur le produit

lorsqu’il est nécessaire de se

référer au manuel d’instruction pour

éviter une détérioration du matériel.

Masse. Ce symbole identifie

une connexion au châssis du

matériel (ce châssis inclut

normalement toutes les

structures métalliques

exposées).

Terre : ce symbole identifie la

connexion de terre chargée de

protéger le matériel contre les

chocs électriques. Cette connexion

doit être raccordée vers un

conducteur externe de protection

ou vers une électrode de type terre.

Ce symbole désigne une

opération ou une condition

dite « sensible », qui, si elle

n’est pas correctement

réalisée, pourrait entraîner de

sérieuses détériorations au

matériel ou aux données

utilisateur.

Ce symbole indique un voltage

dangereux (connexion alimentée

en interne par un voltage excédant

1000 volts).

Courant alternatif (ligne de

puissance).

Symbole de déplacement avec

deux personnes requises. Lorsque

ce symbole est noté sur notre

produit, deux personnes sont

requises afin de le déplacer sans

accident

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 5

Table of Contents

1. Introduction........................................................................................7

Overview .............................................................................................................. 7

Vertex HFC Diagram ............................................................................................ 8

Connector Descriptions ........................................................................................ 9

4-Channel Vertex HFC Connectors ........................................................... 9

20-Channel Vertex HFC Connectors ....................................................... 10

Indicator Descriptions......................................................................................... 11

Installation Options............................................................................................. 11

Bench-Top Configuration......................................................................... 11

Rack-Mount Configuration ....................................................................... 11

Ventilation........................................................................................................... 12

How to Contact Us.............................................................................................. 13

Access the Latest Documentation ...................................................................... 14

Documentation Conventions .............................................................................. 14

2. Care and Maintenance ....................................................................15

Cleaning ............................................................................................................. 15

3. Replacing the Fuse..........................................................................16

Overview ............................................................................................................ 16

Procedure........................................................................................................... 16

Remplacement du Fusible du Vertex HFC Fuse ................................................ 18

4. Technical Specifications ..................................................................19

Overview ............................................................................................................ 19

4-Channel Vertex HFC ....................................................................................... 19

20-Channel Vertex HFC ..................................................................................... 20

Interface and Environment Characteristics......................................................... 21

Front Panel Indicators.............................................................................. 21

Power Requirements ............................................................................... 21

Operating Environment............................................................................ 21

Dimensions and Weight........................................................................... 21

Les Indicateurs du Panneau Avant.......................................................... 22

Exigences en Matière d'Alimentation....................................................... 22

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 6

Environnement d'Exploitation................................................................... 22

Dimensions et Poids ................................................................................ 22

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 7

1. Introduction

Overview

Spirent Vertex®High Frequency Converter (Vertex HFC) extends the Vertex channel

emulator frequency range from radio frequency (RF) band to higher millimeter wave

frequency (mmW) band for 5G applications. Vertex HFC converts the signal between

RF <6GHz and mmW frequency.

Two models of the Vertex HFC are available:

•4-channel model (VCE6-HFC-4C)

•20-channel model (VCE6-HFC-20C)

Figure 1. 4-Channel Vertex HFC.

Figure 2. 20-Channel Vertex HFC.

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 8

Vertex HFC Diagram

There is mixer on each conversion link in Vertex HFC. The RF frequency signal is

mixed with the signal from internal LO or external LO and then converted to mmW

frequency. The signal from mmW frequency is also converted to RF frequency with

the same LO. At each input/output (I/O) port, an RF and mmW filter is used to filter

out outband spurious emission or interference.

mmW

I/O

Mixer

Filter

mmW

Filter

LO Distributor

Internal LO

LO Jumper

Amplifier

I/O

Power

Module

Figure 3. 4-Channel Vertex HFC Diagram.

mmW eNB I/O 1

Mixers

Filter

LO Distributor

Internal LO

LO Jumper

Amplifier

RF eNB I/O 1

mmW

Filter

mmW eNB I/O 16 RF eNB I/O 16

mmW UE I/O 1

mmW UE I/O 4

mmW UE I/O 3

mmW UE I/O 2

mmW eNB I/O 2 RF eNB I/O 2

RF UE I/O 1a

RF UE I/O 1b

RF UE I/O 2a

RF UE I/O 2b

RF UE I/O 3a

RF UE I/O 3b

RF UE I/O 4a

RF UE I/O 4b

External 10MHz Ref

Power

Module

Figure 4. 20-Channel Vertex HFC Diagram.

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 9

Connector Descriptions

This section describes the front panel connectors and rear panel connectors on both

models of Vertex HFC.

4-Channel Vertex HFC Connectors

The 4-channel Vertex HFC provides the following connectors on the front panel:

•mmW I/O ports (4 ports) – Connects to mmW frequency devices

•RF I/O ports (4 ports) – Connects to RF frequency devices

Figure 5. 4-Channel Vertex HFC front panel.

The 4-channel Vertex HFC provides the following connectors on the rear panel:

•LO IN port – Connects to external LO if needed

•LO OUT port – Send out LO from internal oscillator

•10MHz Ref IN – Connects to external 10MHz reference clock

NOTE:

The external 10MHz reference signal must be a CW wave signal. There will be a

frequency stability issue if the reference signal is a square wave.

LO OUT

LO IN 10MHz Ref IN

Figure 6. 4-Channel Vertex HFC rear panel.

Vertex High Frequency Converter

Release 2.0 – User Guide

www.spirent.com 10

20-Channel Vertex HFC Connectors

The 20-channel Vertex HFC provides the following connectors on the front panel:

•mmW I/O ports (20 ports) – Connects to mmW frequency devices

•RF I/O ports (24 ports) – Connects to RF frequency devices

Figure 7. 20-Channel Vertex HFC front panel.

The 20-channel Vertex HFC provides the following connectors on the rear panel:

•LO IN port – Connects to external LO if needed

•LO OUT port – Send out LO from internal oscillator

•10MHz Ref IN – Connects to external 10MHz reference clock

NOTE:

The external 10MHz reference signal must be a CW wave signal. There will be a

frequency stability issue if the reference signal is a square wave.

LO OUT

LO IN 10MHz Ref IN

Figure 8. 20-Channel Vertex HFC rear panel.

Altri manuali per Vertex

Indice

Altri manuali Spirent Convertitore multimediale

Spirent

Spirent Vertex VCE6-HFC-4C Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente